Basic Info.
Model NO.
2507 stainless steel rod
Type
Stainless Steel Bars
Standard
ASTM, AISI, GB, JIS, DIN, EN
Certification
ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
Manufacturing
Hot Rolling, Cold Rolling, Forging
Trademark
TISCO POSCO Baosteel
Transport Package
Wooden Box or Wooden Pallet
Specification
φ 3.0mm-350mm
Product Description
| Product Parameters: Stainless Steel rod |
| Material | 2507 S32750 |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. |
| Under Third Party Inspection |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Global leader in stainless rod and round bar fabrication services
ASTM A276 Super Duplex Steel S32750 Round Bar, Super Duplex Steel Bar Supplier, Super Duplex Steel UNS S32760 Bright Bar, Super Duplex Steel 2507 Bar, Super Duplex Steel UNS S32950 Flat Bar, Austenitic Super Duplex Steel S32760 Round Bar, Hot Rolled Super Duplex Steel S32760 Round Bar, Super Duplex Steel S32760 Round Bar, Super Duplex Steel UNS S32750 Manufacturer from China.
Hot rolled stainless steel rod
Our stainless steel rods and bars are meticulously heated and rolled through multiple passes in a state-of-the-art rolling mill, ensuring that each piece meets rigorous specifications and performance standards.
Cold drawn bright stainless steel rods
Cold-drawn stainless steel rods undergo a precise drawing process under cold working conditions, resulting in a smooth, refined surface. These rods can also be polished and ground for further perfection.
Forged stainless steel rod and bar
Our forged stainless steel rods are meticulously forged multiple times to enhance their mechanical properties, resulting in superior strength and durability.
General Properties
Our extensive network of service centers ensures a fast, ready supply of common bar sizes and alloys. We offer custom-sized stainless steel bars and, even if quantities are below the factory minimum, we can arrange a stocking program for quick turnaround. Daxun Alloys stocks stainless steel round bars ranging from 1/16" to 26" in diameter, available in nearly every grade including 302, 303, 304/L, 309/S, 310/S, 316/L, 317/L, 321, 321/H, 347, 347H, 410, 416, 420, 440C, 17-4PH, Duplex 2205, and Alloy 20.
Additional Services
Most of our inventory consists of our uniquely processed bar grade: stainless steel round bars, melted to exacting standards to enhance machinability and reduce overall part costs. Our advanced stainless steel bar processing machinery ensures that Daxun Alloys can produce bars to the precise specifications required by our customers.
1. Daxun offers heat treatments for our stainless steel bars, tailored to the specific chemical composition of the metal. 2. Positive Material Identification (PMI): Additional PMI testing may be necessary in certain cases. Daxun Stainless Steel Products can perform this testing in-house or collaborate with an independent laboratory. 3. Ultrasonic Testing (UT): High-frequency sound energy is used to inspect and measure stainless steel bar products, aiding in defect detection, evaluation, and dimensional measurement.
For more information on stainless steel rods, please contact Daxun
2507 Stainless Steel Rod chemical composition
| Grade | Super Duplex 2507 |
| UNS Designation | S32750 |
| Carbon (C) Max. | 0.03 |
| Manganese (Mn) Max. | 1.2 |
| Phosphorous (P) Max. | 0.035 |
| *** (S) Max. | 0.02 |
| Silicon (Si) Max. | 0.8 |
| Chromium (Cr) | 24.0-26.0 |
| Nickel (Ni) | 6.0-8.0 |
| Molybdenum (Mo) | 3.0-5.0 |
| Nitrogen (N) | 0.24-0.32 |
| Iron (Fe) | Bal. |
| Copper (Cu) | 0.5 |
| Other Elements | - |
2507 Stainless Steel Rod Mechanical properties
| Physical Properties of Super Duplex 2507 Alloys in the Annealed Condition at -20°F to +100°F |
| | | | Tensile Strength | Yield Strength | | | | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 in. (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion (IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ ft2-h-°F) |
| Super Duplex 2507 | S32950 | A789, A790 | 100,000 | 690 | 100 | 70,000 | 485 | 70 | 20 | - | 30.5 Rc | - | - | - |
| Super Duplex 2507 | S32750 | A789, A790 | 116,000 | 800 | 116 | 80,000 | 550 | 80 | 15 | - | 32 Rc | 27.5 | 7.2 | 98 |
2507 Stainless Steel Rod Physical properties
| Density, lb/in3 | 0.28 |
| Modulus of Elasticity, psi | 29.0x 106 |
| Coefficient of Thermal Expansion, 68-212˚F, /˚F | 7.5 x 10-6 |
| Thermal Conductivity, Btu/ft hr ˚F | 8 |
| Specific Heat, Btu/lb ˚F | 0.12 |
| Electrical Resistivity, Microhm-in | 31.5 |
Daxun's stainless steel rods manufacturing capabilities
Our forming capabilities include state-of-the-art radial forging machines, heat treatment furnaces, melting furnaces, rolling mills for titanium rod manufacturing, and a unique hydroforming process for part manufacturing.
Daxun's heat treatment furnace
Our advanced heat treatment furnace equipment ensures the stability and high performance of our stainless steel rods.
Daxun's smelting ability
Daxun Stainless Steel utilizes the world's most advanced vacuum induction furnace, vacuum consumable furnace, and electroslag furnace to minimize impurities and enhance the performance of our finished stainless steel rods.
Entrust us to be your reliable and unparalleled supplier of Stainless Steel Rods
Our stainless steel products come with full certification and traceability, ensuring top-notch quality. We proudly supply premium stainless steel to leading sectors such as aerospace, industrial, medical, marine, and military.
Mechanical Properties of Various Grades of Stainless Steel Bars
| | Tensile Strength | Yield Strength | | | | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. |
| Grade | Tensile Str | Yield Str | Elong | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell B (HR B) max | Brinell (HB) max |
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| | Tensile Strength | Yield Strength | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell C (HR C) | Brinell (HB) |
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
2507/
S32750 | Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi |
| Ultimate Tensile Strength | 116 ksi |
| 0.1% Offset Yield Strength 0.2% | 91 ksi |
| Elongation in 2 inches, % | 15% |
| Hardness Rockwell C | 32 |
| Impact Energy | 74 ft.-lbs |
| Density | 0.28 lb per inch3 |
| Modulus of elasticity | 28 x 10(6) psi |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of |
| Thermal conductivity | 8.7 Btu/hr ftoF |
| Heat capacity | 0.12 Btu/ lb oF |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
For further details regarding our superior stainless steel rods, please reach out to Jiangsu Daxun Alloy Co., Ltd.
DUPLEX 2507 STAINLESS STEEL ROD AND BAR
- Daxun Alloys' extensive inventory proudly features the Duplex 2507 Round Bar. This super duplex stainless steel bar boasts a composition of 25% chromium, 4% molybdenum, and 7% nickel, making it ideal for high-demand applications requiring impeccable strength and corrosion resistance. Perfect for chemical processing, petrochemical industries, and seawater equipment, this alloy stands out for its remarkable resistance to chloride stress corrosion cracking, excellent thermal conductivity, and a low coefficient of thermal expansion. The high chromium, molybdenum, and nickel content ensures superior resistance to pitting, crevice, and general corrosion.
GENERAL PROPERTIES
- Duplex 2507 (UNS S32750) is a super duplex stainless steel bar featuring a distinguished blend of 25% chromium, 4% molybdenum, and 7% nickel. Engineered for the most challenging applications, it delivers unparalleled strength and corrosion resistance, making it indispensable for chemical processing, petrochemical sectors, and seawater equipment. This steel's formidable resistance to chloride stress corrosion cracking, coupled with its high thermal conductivity and low coefficient of thermal expansion, renders it exceptionally reliable. The high chromium, molybdenum, and nickel contents further enhance its resistance to pitting, crevice, and general corrosion.
Applications
- Oil and gas industry equipment
- Offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, injection and ballast water systems
- Chemical process industries, heat exchangers, vessels, and piping
- Desalination plants, high pressure RO-plant and seawater piping
- Mechanical and structural components, high strength, corrosion-resistant parts
- Power industry FGD systems, utility and industrial scrubber systems, absorber towers, ducting, and piping
Standards
- ASTM/ASME ...…. A240 - UNS S32750
EURONORM...... 1.4410 - X2 Cr Ni MoN 25.7.4
AFNOR........... Z3 CN 25.06 Az
Can you do SS grinding bar & rod?
Yes, we can manufacture SS grinding bars & rods with precise dimensions, exceptional roundness, and straightness. These attributes surpass standard polished bars, though the processing cost is higher.
Q1: What products can you offer?
A: We offer a wide range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, 300 series,
400 series, and duplex stainless steels such as 2205, 2304, 2101, 2507. We also supply high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can produce products precisely according to your drawings to ensure your utmost satisfaction.
Q3. How does your factory handle quality control?
Quality is our top priority. We rigorously control quality from the initial stages to the final product.
Q4. Can I request changes in packaging and transportation?
Yes, we can modify packaging and transportation as per your request,
though you will need to cover any additional costs incurred during this process.
Q5. How does your factory handle quality control?
Quality is paramount. We maintain stringent quality control measures throughout the production process.
Q6. What is the delivery time?
A: Typically, 7 to 20 working days after payment confirmation.
For urgent orders, we will prioritize to expedite the completion.
Q7. What are your payment terms?
A: 100% T/T in advance, Western Union (for small orders).
B: 30% T/T deposit and 70% balance before shipment.
C: 100% Irrevocable LC at sight (for large orders).
Q8: Can you produce DDQ (Deep Drawing Quality)?
A: Yes, we specialize in DDQ material suitable for stainless steel pots, sinks, bowls, etc. Share your usage, and we will tailor the mechanical properties to meet your requirements.
Q9: How can I get a sample?
A: FREE samples are available for your assessment. For small pieces, we may cover courier costs, depending on the circumstances.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Address:
B108, No. 32-1, Chengnan Road, Xinwu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, HQE, IFS
Company Introduction:
Founded in 2003, Daxun Alloy is a leading global metal material manufacturer. Headquartered in Wuxi, China, the company has multiple production bases and sales offices around the world. Daxun Alloy focuses on the development, production and sales of various stainless steels, titanium alloys, high-temperature alloys, etc. For general industry, construction, aerospace, energy, chemical industry, medical and other fields.
China, Daxun Metal Group is a global vertically integrated metal material manufacturer and stockist. Daxun can provide finished products and customized full-process services and professional technical services. Currently, the group has 600 employees and covers a total area of 130, 000 square meters. Daxun has a standing inventory of 50, 000 tons of stainless steel, 5, 000 tons of nickel-based alloys, and 2, 000 tons of pure titanium and titanium alloys. The main product forms are metal plates, metal coils, metal pipes, and metal bars. The metal materials produced by Daxun are market leaders for marine, energy, military, general industrial and aerospace applications. In addition, the company also produces seamless pipes, plates, forgings and other metal materials for power generation and oil and gas applications; Commercial and military alloy products; And metal alloys and other metal products for the forging industry.
