Basic Info.
Model NO.
410 stainless steel rod
Type
Stainless Steel Bars
Standard
ASTM, AISI, GB, JIS, DIN, EN
Certification
ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
Manufacturing
Hot Rolling, Cold Rolling, Forging
Trademark
TISCO POSCO Baosteel
Transport Package
Wooden Box or Wooden Pallet
Specification
φ 3.0mm-350mm
Product Description
Product Parameters: Stainless Steel rod |
Material | 410 |
Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round Bars | Outside Diameter in the range of 4mm to 500mm |
Bright Bars | Outside Diameter in the range of 4mm to 100mm |
Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Length | 1 to 6 Meters, Custom Cut Lengths |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
Laboratory Test Certificate from Govt. Approved Lab. |
Under Third Party Inspection |
Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Global Leader in Stainless Rod and Round Bar Fabrication Services
ASTM A479 AISI 410 Stainless Steel Round Bar, ASTM A479 SS 410 Square Bar, 410 Stainless Steel Flat Bar, Stainless Steel 410 Rod. Extensive range of Stainless Steel 410 Round Bar, SS 410 Round Bar, SS DIN 1.4006 Round Bar manufacturers. Buy Stainless Steel 410 Bright Bar, 410 SS Polished Bar from Leading SS 410 Rod suppliers and China AISI SS 410 Round Bar producers.
Hot Rolled Stainless Steel Rod
Our Stainless Steel Rod and Bar undergo a meticulous heating and rolling process through multiple passes in a state-of-the-art rolling mill. The product meets comprehensive specifications and adheres to the highest standards and requirements.
Cold Drawn Bright Stainless Steel Rods
Cold-drawn Stainless Steel Rods are manufactured under cold working conditions, resulting in smooth surfaces. These rods can also be polished and ground to meet exact specifications.
Forged Stainless Steel Rod and Bar
Forged Stainless Steel Rods benefit from multiple forging processes to enhance mechanical properties and achieve superior strength characteristics.
General Properties
Our extensive network of service centers ensures rapid supply of standard stainless steel bar sizes and alloys. We cater to custom sizes, and for quantities below factory minimums, offer stocking programs for quick turnaround. Daxun Alloys stocks stainless steel round bars from 1/16" to 26" in diameter in nearly every grade, including 302, 303, 304/L, 309/S, 310/S, 316/L, 317/L, 321, 321/H, 347, 347H, 410, 416, 420, 440C, 17-4PH, Duplex 2205, and Alloy 20.
Additional Services
Much of our inventory includes our specially processed bar grade: stainless steel round bars, melted to stringent standards to boost machinability and minimize part production costs. Our advanced bar processing machinery allows Daxun Alloys to meet precise customer specifications.
1. Heat Treatments: Daxun can perform specialized heat treatments on stainless steel bars, depending on the metal chemistry. 2. Positive Material Identification (PMI): Additional PMI testing can be conducted in-house or in collaboration with independent laboratories. 3. Ultrasonic Testing (UT): We utilize high-frequency sound energy for defect detection, dimensional measurement, and more, ensuring the highest quality of our stainless steel products.
For more information on our superior stainless steel rods, please contact Daxun.
410 Stainless Steel Rod Chemical Composition
UNS No | S41000 |
EN | 1.4006 |
AISI | 410 |
Carbon (C) | 0.08/0.15 |
Silicon (Si) | 1 |
Manganese (Mn) | 1 |
Phosphorus (P) | 0.04 |
*** (S) | 0.03 |
Chromium (Cr) | 11.5/13.5 |
Molybdenum (Mo) | |
Nickel (Ni) | 0.75 |
410 Stainless Steel Rod Mechanical Properties
Property | Value |
Density | 7.8 g/cc |
Yield Strength | 1,225 MPa at a strain of 0.2% |
Ultimate Tensile Strength | 1,525 MPa |
Hardness | 126-192 Brinell hardness (annealed condition) 201-255 Brinell hardness (when hardened and tempered) |
Bulk Modulus | 200 GPa |
Melting Point | 1,480-1,530 °C |
Corrosion Resistance | Good corrosion resistance in mild atmospheric environments, water, and some mild chemical environments. It shows pitting corrosion and brown staining in salt water conditions and offers lower resistance to acidic environments than the austenitic stainless steel alternatives. |
Magnetism | Permeability 700-1,000. Highly responsive to magnetic fields, act as a strong magnetic flux carrier due to its martensitic structure. |
410 Stainless Steel Rod Physical Properties
Density (lb./ in^2) @ RT | | 0.28 |
Modulus of Elasticity in Tension (psi x 10^6) | | 29 |
Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.11 |
Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 14.4 |
| 932oF | 16.6 |
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 5.5 |
| 32 to 1,200oF | 6.5 |
Electrical Resistivity (micro ohms - cm) | at 70oF | 22.5 |
Daxun's Stainless Steel Rods Manufacturing Capabilities
Our forming capabilities encompass cutting-edge radial forging machines, heat treatment furnaces, melting furnaces, and rolling mills for titanium rod production. We also feature a unique hydroforming process for part manufacturing.
Daxun's Heat Treatment Furnace
Our advanced heat treatment furnace equipment ensures the stability and superior performance of our stainless steel rods.
Daxun's Smelting Abilities
Daxun Stainless Steel employs the world's most advanced vacuum induction furnace, vacuum consumable furnace, and electroslag furnace to minimize impurities and enhance the performance of the final stainless steel rods.
Choose Us as Your Trusted Stainless Steel Rod Supplier
Our premium stainless steel products are fully certified and meticulously traceable. We provide top-tier stainless steel to prestigious industries such as aerospace, industrial, medical, marine, and military sectors.
Detailed Mechanical Properties of Various Grades of Stainless Steel Bars
| Tensile Strength | Yield Strength | | | | | | |
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. |
Grade | Tensile Str | Yield Str | Elong | Hardness |
(MPa) min | 0.2% Proof | (% in 50mm) min |
| (MPa) min | | Rockwell B (HR B) max | Brinell (HB) max |
316 | 515 | 205 | 40 | 95 | 217 |
316L | 485 | 170 | 40 | 95 | 217 |
316H | 515 | 205 | 40 | 95 | 217 |
| Tensile Strength | Yield Strength | | | |
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
Grade | Tensile Strength | Yield Strength | Elongation | Hardness |
(MPa) min | 0.2% Proof | (% in 50mm) min |
| (MPa) min | | Rockwell C (HR C) | Brinell (HB) |
UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
Grade | Property | Value |
2507/ S32750 | Density (g/cm3) | 7.8 |
0.2% Offset Yield Strength | 80 ksi |
Ultimate Tensile Strength | 116 ksi |
0.1% Offset Yield Strength 0.2% | 91 ksi |
Elongation in 2 inches, % | 15% |
Hardness Rockwell C | 32 |
Impact Energy | 74 ft.-lbs |
Density | 0.28 lb per inch3 |
Modulus of elasticity | 28 x 10(6) psi |
Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of |
Thermal conductivity | 8.7 Btu/hr ftoF |
Heat capacity | 0.12 Btu/ lb oF |
Electrical resistivity | 31.5 x10(-6) ohm-inch |
For Further Details on Stainless Steel Rods, Kindly Reach Out to Daxun
- GENERAL PROPERTIES
Standard Martensitic Stainless Steel Bar 410 is a versatile material engineered for parts subjected to extreme stresses. Renowned for its superior corrosion resistance, high strength, and remarkable hardness, Alloy 410 round bar boasts a minimum of 11.5% chromium content. This composition ensures resilience against steam, moderate chemicals, and mild atmospheric conditions. Typically supplied in a hardened yet machinable state, this grade is ideal for applications demanding robust strength and moderate resistance to heat and corrosion. The pinnacle of corrosion resistance is attained when the 410 round bar is polished, tempered, and hardened. Specifications: UNS S41000
APPLICATIONS:
- Cutlery
- Steam and gas turbine blades
- Kitchen utensils
- Bolts, nuts, screws
- Pump and valve parts and shafts
- Mine ladder rungs
- Dental and surgical instruments
- Nozzles
- Hardened steel balls and seats for oil well pumps
CORROSION RESISTANCE:
- With its excellent resistance to air corrosion, this material excels in mildly corrosive environments and is safe for use with drinking water. Proper cleaning after exposure to daily activities such as sports and food preparation ensures its longevity. It demonstrates significant resistance to low concentrations of moderate organic and mineral acids, preventing corrosion effectively.
Features:
- It retains magnetic properties in both annealed and hardened conditions.
- Various heating methods can induce a wide range of properties.
- Exhibits exceptional corrosion resistance to acids like sulfuric acid.
Available Stock Sizes:
For specific product sizes, visit our product pages. Contact us for quotes on custom size orders.
SS 410 grade stainless steel round bars
410 Stainless steel round bars are indispensable across diverse sectors, from construction to automotive parts. Recognizing the extensive applications, Daxun Alloys provides an array of grades and sizes. Our advanced cutting service ensures precise adherence to your specifications, every single time.
Can you manufacture stainless steel grinding bars and rods?
Yes, we specialize in producing stainless steel grinding bars and rods that boast exceptional precision in dimension, roundness, and straightness. These qualities surpass those of stainless steel polished bars, although the processing costs are higher.
Q1: What products can you offer?
A: We offer a wide range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, 300 series,
400 series, and duplex stainless steels like 2205, 2304, 2101, 2507, etc., as well as high-nickel alloys such as 904L, 800H, and 600H.
Q2: Can you produce products according to my drawings?
Yes, we can manufacture products based on your drawings, ensuring your utmost satisfaction.
Q3: How does your factory handle quality control?
Quality is our top priority. We consistently place great emphasis on quality control from start to finish.
Q4: Can I request changes in packaging and transportation methods?
Yes, we can modify packaging and transportation methods according to your request.
However, you will need to bear any additional costs incurred during this period as well as any price differences.
Q5: How does your factory handle quality control?
Quality is our top priority. We consistently place great emphasis on quality control from start to finish.
Q6: What is the delivery time?
A: Delivery takes approximately 7 to 20 working days after payment confirmation.
If the order is urgent, we prioritize it to ensure earlier completion.
Q7: What are your payment terms?
A: 100% T/T in advance, Western Union (for small orders)
B: 30% T/T in advance, balance 70% before shipment
C: 100% Irrevocable LC at sight (for large orders)
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Provide us with your specific usage, and we will adjust the mechanical properties to meet your requirements.
Q9: How can I obtain a sample?
A: FREE samples are available for your inspection and testing. If you require a small piece, we can cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, UAE, Ukraine, and others.
Address:
B108, No. 32-1, Chengnan Road, Xinwu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, HQE, IFS
Company Introduction:
Founded in 2003, Daxun Alloy is a leading global metal material manufacturer. Headquartered in Wuxi, China, the company has multiple production bases and sales offices around the world. Daxun Alloy focuses on the development, production and sales of various stainless steels, titanium alloys, high-temperature alloys, etc. For general industry, construction, aerospace, energy, chemical industry, medical and other fields.
China, Daxun Metal Group is a global vertically integrated metal material manufacturer and stockist. Daxun can provide finished products and customized full-process services and professional technical services. Currently, the group has 600 employees and covers a total area of 130, 000 square meters. Daxun has a standing inventory of 50, 000 tons of stainless steel, 5, 000 tons of nickel-based alloys, and 2, 000 tons of pure titanium and titanium alloys. The main product forms are metal plates, metal coils, metal pipes, and metal bars. The metal materials produced by Daxun are market leaders for marine, energy, military, general industrial and aerospace applications. In addition, the company also produces seamless pipes, plates, forgings and other metal materials for power generation and oil and gas applications; Commercial and military alloy products; And metal alloys and other metal products for the forging industry.