Basic Info.
Model NO.
410 stainless steel rod
Type
Stainless Steel Bars
Standard
ASTM, AISI, GB, JIS, DIN, EN
Certification
ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
Manufacturing
Hot Rolling, Cold Rolling, Forging
Trademark
TISCO POSCO Baosteel
Transport Package
Wooden Box or Wooden Pallet
Specification
φ 3.0mm-350mm
Product Description
| Product Parameters: Stainless Steel rod |
| Material | 410 |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. |
| Under Third Party Inspection |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Global Leader in Stainless Rod and Round Bar Fabrication Services
ASTM A479 AISI 410 Stainless Steel Round Bar, ASTM A479 SS 410 Square Bar, 410 Stainless Steel Flat Bar, Stainless Steel 410 Rod-an extensive range of Stainless Steel 410 products. As leading manufacturers, we offer SS 410 Round Bar, SS DIN 1.4006 Round Bar, Stainless Steel 410 Bright Bar, 410 SS Polished Bar, and more. Buy from trusted SS 410 Rod suppliers, China AISI SS 410 Round Bar producers.
Hot Rolled Stainless Steel Rod
Our Stainless Steel Rod and Bar undergo a meticulous heating and rolling process through multiple passes in a rolling mill. The result? Complete specifications and performance that meet all standards and requirements.
Cold Drawn Bright Stainless Steel Rods
Cold-drawn Stainless Steel Rods are meticulously crafted under cold working conditions for a smooth surface. They can also be polished and ground to perfection.
Forged Stainless Steel Rod and Bar
Forged Stainless Steel Rods undergo multiple forging processes to enhance their mechanical properties and strength.
General Properties
Our extensive network of service centers stocks stainless steel bar products for immediate supply. Whether you need common bar sizes or custom dimensions, we've got you covered. For quantities below factory minimums, we offer a stocking program for prompt turnaround. Daxun Alloys stocks stainless steel round bars from 1/16" to 26" in diameter, available in nearly every grade, including 302, 303, 304/L, 309/S, 310/S, 316/L, 317/L, 321, 321/H, 347, 347H, 410, 416, 420, 440C, 17-4PH, Duplex 2205, and Alloy 20.
Additional Services
Most of our inventory features our unique processed bar grade. These stainless steel round bars are consistently melted to improve machinability and reduce overall part costs. Our advanced bar processing machinery allows Daxun Alloys to meet the exact specifications of our customers.
1. Heat Treatments: Daxun can perform heat treatments on our stainless steel bars, depending on the metal's chemistry. 2. Positive Material Identification (PMI): We provide in-house PMI testing or partner with independent labs to complete this testing as required. 3. Ultrasonic Testing (UT): Utilizing high-frequency sound energy, UT inspects and measures stainless steel bar products, aiding in defect detection, dimensional measurement, and more.
For More Information on Stainless Steel Rods, Please Contact Daxun
410 Stainless Steel Rod Chemical Composition
| UNS No | S41000 |
| EN | 1.4006 |
| AISI | 410 |
| Carbon (C) | 0.08/0.15 |
| Silicon (Si) | 1 |
| Manganese (Mn) | 1 |
| Phosphorus (P) | 0.04 |
| *** (S) | 0.03 |
| Chromium (Cr) | 11.5/13.5 |
| Molybdenum (Mo) | |
| Nickel (Ni) | 0.75 |
410 Stainless Steel Rod Mechanical Properties
| Property | Value |
| Density | 7.8 g/cc |
| Yield Strength | 1,225 MPa at a strain of 0.2% |
| Ultimate Tensile Strength | 1,525 MPa |
| Hardness | 126-192 Brinell hardness (annealed condition) 201-255 Brinell hardness (when hardened and tempered) |
| Bulk Modulus | 200 GPa |
| Melting Point | 1,480-1,530 °C |
| Corrosion Resistance | Good corrosion resistance in mild atmospheric environments, water, and some mild chemical environments. It shows pitting corrosion and brown staining in salt water conditions and offers lower resistance to acidic environments than the austenitic stainless steel alternatives. |
| Magnetism | Permeability 700-1,000. Highly responsive to magnetic fields, act as a strong magnetic flux carrier due to its martensitic structure. |
410 Stainless Steel Rod Physical Properties
| Density (lb./ in^2) @ RT | | 0.28 |
| Modulus of Elasticity in Tension (psi x 10^6) | | 29 |
| Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.11 |
| Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 14.4 |
| | 932oF | 16.6 |
| Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 5.5 |
| | 32 to 1,200oF | 6.5 |
| Electrical Resistivity (micro ohms - cm) | at 70oF | 22.5 |
Daxun's Stainless Steel Rods Manufacturing Capabilities
Our forming capabilities include state-of-the-art radial forging machines, advanced heat treatment furnaces, top-tier melting furnaces, and rolling mills. Additionally, we utilize a unique hydroforming process for manufacturing titanium rods and parts.
Daxun's Heat Treatment Furnace
Our stainless steel rod heat treatment employs advanced furnace equipment to ensure material stability and high performance.
Daxun's Smelting Ability
At Daxun Stainless Steel, we utilize the world's most advanced vacuum induction furnace, vacuum consumable furnace, and electroslag furnace. This cutting-edge technology reduces impurities during smelting, significantly improving the performance of the finished stainless steel rods.
Allow us to be your most reliable stainless steel rod supplier.
At Jiangsu Daxun Alloy Co., Ltd., our stainless steel products are fully certified and meticulously traceable. We pride ourselves on delivering the highest quality stainless steel to a diverse range of leading industries, including aerospace, industrial, medical, marine, and military sectors.
Delve into the mechanical properties of various grades of stainless steel bars.
| | Tensile Strength | Yield Strength | | | | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. |
| Grade | Tensile Str | Yield Str | Elong | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell B (HR B) max | Brinell (HB) max |
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| | Tensile Strength | Yield Strength | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell C (HR C) | Brinell (HB) |
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
2507/
S32750 | Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi |
| Ultimate Tensile Strength | 116 ksi |
| 0.1% Offset Yield Strength 0.2% | 91 ksi |
| Elongation in 2 inches, % | 15% |
| Hardness Rockwell C | 32 |
| Impact Energy | 74 ft.-lbs |
| Density | 0.28 lb per inch3 |
| Modulus of elasticity | 28 x 10(6) psi |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of |
| Thermal conductivity | 8.7 Btu/hr ftoF |
| Heat capacity | 0.12 Btu/ lb oF |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
For detailed information about our premier stainless steel rods, please reach out to Daxun.
- GENERAL PROPERTIES
Standard Martensitic Stainless Steel Bar 410 is the go-to material for parts enduring intense stress, offering not only exceptional corrosion resistance but also remarkable strength and hardness. Featuring a minimum of 11.5% chromium, Alloy 410 round bar stands resilient against corrosion in steam, various chemical environments, and mild atmospheres. Typically provided in a hardened yet machinable state, this versatile grade is ideal for applications demanding high strength alongside moderate heat and corrosion resistance. To attain the pinnacle of corrosion resistance, round bar 410 should be polished, tempered, and hardened. Specifications: UNS S41000
APPLICATIONS:
- Cutlery
- Steam and gas turbine blades
- Kitchen utensils
- Bolts, nuts, screws
- Pump and valve parts and shafts
- Mine ladder rugs
- Dental and surgical instruments
- Nozzles
- Hardened steel balls and seats for oil well pumps
CORROSION RESISTANCE:
- Exhibits robust corrosion resistance in environments with air exposure, mildly corrosive conditions, and drinking water. With appropriate post-use cleaning, it performs admirably in everyday scenarios like sports and food prep. Additionally, it boasts high resistance to low concentrations of moderate organic and mineral acids, ensuring it remains rust-free.
Features:
- Magnetic in both its annealed and hardened states.
- Diverse properties can be tailored by varying heating methods.
- Exhibits exceptional corrosion resistance to acids such as sulfuric acid.
Available Stock Sizes:
Consult specific product pages for available sizes and contact us for quotes on custom size orders.
SS 410 grade stainless steel round bars
The versatility of 410 stainless steel round bars makes them indispensable across diverse industries, from construction to automotive manufacturing. Daxun Alloys offers these round bars in multiple grades and sizes to suit a wide array of applications. Leverage our advanced, complimentary cutting service to ensure precise fulfillment of your customized requirements every time.
Can you provide SS grinding bars and rods?
Absolutely! Our SS grinding bars and rods boast unparalleled precision in dimension, roundness, and straightness, surpassing standard polished bars. Do note, this superior processing does come at a higher cost.
Q1: What products can you offer?
A: We provide a wide array of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we offer
400 series, duplex stainless steels like 2205, 2304, 2101, 2507, and high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products exactly according to your drawings, ensuring they meet your highest satisfaction.
Q3. How does your factory manage quality control?
Quality is our utmost priority. We meticulously control quality at every stage, from inception to completion.
Q4. Can I request changes to packaging and transportation methods?
Yes, we can adapt our packaging and transportation to meet your specific requirements,
though you will be responsible for any additional costs and differences incurred during this period.
Q5. How does your factory manage quality control?
Quality is our utmost priority. We meticulously control quality at every stage, from inception to completion.
Q6. What is the delivery time?
A: Typically, 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite production to meet your timeline.
Q7. What are your payment terms?
A: 100% T/T in advance or via Western Union for small orders.
B: 30% T/T upfront with the balance of 70% due before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you produce DDQ (Deep Drawing Quality) materials?
A: Yes, our materials are suitable for stainless steel pots, sinks, bowls, etc. Just specify your needs, and we'll adjust the mechanical properties accordingly.
Q9: How can I obtain a sample?
A: We offer FREE samples for your evaluation. For small pieces, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Address:
B108, No. 32-1, Chengnan Road, Xinwu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, HQE, IFS
Company Introduction:
Founded in 2003, Daxun Alloy is a leading global metal material manufacturer. Headquartered in Wuxi, China, the company has multiple production bases and sales offices around the world. Daxun Alloy focuses on the development, production and sales of various stainless steels, titanium alloys, high-temperature alloys, etc. For general industry, construction, aerospace, energy, chemical industry, medical and other fields.
China, Daxun Metal Group is a global vertically integrated metal material manufacturer and stockist. Daxun can provide finished products and customized full-process services and professional technical services. Currently, the group has 600 employees and covers a total area of 130, 000 square meters. Daxun has a standing inventory of 50, 000 tons of stainless steel, 5, 000 tons of nickel-based alloys, and 2, 000 tons of pure titanium and titanium alloys. The main product forms are metal plates, metal coils, metal pipes, and metal bars. The metal materials produced by Daxun are market leaders for marine, energy, military, general industrial and aerospace applications. In addition, the company also produces seamless pipes, plates, forgings and other metal materials for power generation and oil and gas applications; Commercial and military alloy products; And metal alloys and other metal products for the forging industry.
