Basic Info.
Model NO.
410 stainless steel rod
Type
Stainless Steel Bars
Standard
ASTM, AISI, GB, JIS, DIN, EN
Certification
ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
Manufacturing
Hot Rolling, Cold Rolling, Forging
Trademark
TISCO POSCO Baosteel
Transport Package
Wooden Box or Wooden Pallet
Specification
φ 3.0mm-350mm
Product Description
| Product Parameters: Stainless Steel rod |
| Material | 410 |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. |
| Under Third Party Inspection |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
A Global Pioneer in Stainless Steel Rod and Round Bar Fabrication Services
Discover the unparalleled quality of our ASTM A479 AISI 410 Stainless Steel Round Bar, ASTM A479 SS 410 Square Bar, 410 Stainless Steel Flat Bar, Stainless Steel 410 Rod, and a comprehensive array of Stainless Steel 410 Round Bars. We are esteemed manufacturers of SS 410 Round Bars, SS DIN 1.4006 Round Bars, and renowned suppliers of Stainless Steel 410 Bright Bars, 410 SS Polished Bars, and SS 410 Rods. Entrust your needs to China's leading AISI SS 410 Round Bar producers.
Premium Hot-Rolled Stainless Steel Rod
Our stainless steel rods and bars undergo meticulous heating and multiple rolling passes in a state-of-the-art rolling mill. With a complete range of specifications, their performance meets and exceeds established standards and requirements.
Cold-Drawn Bright Stainless Steel Rods
Crafted under cold working conditions, our cold-drawn stainless steel rods boast a smooth surface that can be further polished and ground to perfection.
Superior Forged Stainless Steel Rod and Bar
Our forged stainless steel rods are subjected to multiple forging processes, significantly enhancing their mechanical properties and delivering higher strength.
General Properties Overview
Our extensive network of service centers ensures a ready supply of stainless steel bar products, available in a variety of common sizes and alloys. We also offer custom-sized stainless steel bars and a convenient stocking program for quantities below the factory minimum. Daxun Alloys stocks stainless steel round bars ranging from 1/16" to 26" in diameter in nearly every grade, including 302, 303, 304/L, 309/S, 310/S, 316/L, 317/L, 321, 321/H, 347, 347H, 410, 416, 420, 440C, 17-4PH, Duplex 2205, and Alloy 20.
Additional Value-Added Services
Daxun Alloys prides itself on offering a unique processed bar grade of stainless steel round bars, melted to consistent standards to improve machinability while reducing total part costs. Our advanced stainless steel bar processing machinery allows us to meet the precise specifications of our valued customers.
1. Heat Treatments: Daxun offers specialized heat treatments tailored to the specific chemistry of the metal. 2. Positive Material Identification (PMI): We perform comprehensive PMI testing in-house or collaborate with independent laboratories to ensure material integrity. 3. Ultrasonic Testing (UT): Utilizing high-frequency sound energy, UT inspects and measures stainless steel bar products for defect detection, dimensional accuracy, and more.
For further information on our premium stainless steel rods, please reach out to Daxun.
Comprehensive Chemical Composition of 410 Stainless Steel Rod
| UNS No | S41000 |
| EN | 1.4006 |
| AISI | 410 |
| Carbon (C) | 0.08/0.15 |
| Silicon (Si) | 1 |
| Manganese (Mn) | 1 |
| Phosphorus (P) | 0.04 |
| *** (S) | 0.03 |
| Chromium (Cr) | 11.5/13.5 |
| Molybdenum (Mo) | |
| Nickel (Ni) | 0.75 |
Mechanical Properties of 410 Stainless Steel Rod
| Property | Value |
| Density | 7.8 g/cc |
| Yield Strength | 1,225 MPa at a strain of 0.2% |
| Ultimate Tensile Strength | 1,525 MPa |
| Hardness | 126-192 Brinell hardness (annealed condition) 201-255 Brinell hardness (when hardened and tempered) |
| Bulk Modulus | 200 GPa |
| Melting Point | 1,480-1,530 °C |
| Corrosion Resistance | Good corrosion resistance in mild atmospheric environments, water, and some mild chemical environments. It shows pitting corrosion and brown staining in salt water conditions and offers lower resistance to acidic environments than the austenitic stainless steel alternatives. |
| Magnetism | Permeability 700-1,000. Highly responsive to magnetic fields, act as a strong magnetic flux carrier due to its martensitic structure. |
Physical Properties of 410 Stainless Steel Rod
| Density (lb./ in^2) @ RT | | 0.28 |
| Modulus of Elasticity in Tension (psi x 10^6) | | 29 |
| Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.11 |
| Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 14.4 |
| | 932oF | 16.6 |
| Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 5.5 |
| | 32 to 1,200oF | 6.5 |
| Electrical Resistivity (micro ohms - cm) | at 70oF | 22.5 |
Daxun's Cutting-Edge Stainless Steel Rod Manufacturing Capabilities
Our forming capabilities are bolstered by advanced radial forging machines, heat treatment furnaces, melting furnaces, and rolling mills. We also utilize a unique hydroforming process to manufacture parts with precision.
State-of-the-Art Heat Treatment Furnace at Daxun
Our advanced heat treatment furnace equipment ensures the stability and high performance of our stainless steel rods, elevating their material quality.
Daxun's Superior Smelting Ability
Utilizing the world's most advanced vacuum induction furnace, vacuum consumable furnace, and electroslag furnace, Daxun Stainless Steel minimizes impurities during the smelting process, delivering superior performance in our finished stainless steel rods.
Allow us the privilege of being your reliable Stainless Steel Rod supplier
Our stainless steel products come with full certification and traceability, ensuring the highest quality. We proudly supply top-grade stainless steel to a range of leading industries, such as aerospace, industrial, medical, marine, and military sectors.
Mechanical Properties of Various Grades of Stainless Steel Bars
| | Tensile Strength | Yield Strength | | | | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. |
| Grade | Tensile Str | Yield Str | Elong | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell B (HR B) max | Brinell (HB) max |
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| | Tensile Strength | Yield Strength | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell C (HR C) | Brinell (HB) |
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
2507/
S32750 | Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi |
| Ultimate Tensile Strength | 116 ksi |
| 0.1% Offset Yield Strength 0.2% | 91 ksi |
| Elongation in 2 inches, % | 15% |
| Hardness Rockwell C | 32 |
| Impact Energy | 74 ft.-lbs |
| Density | 0.28 lb per inch3 |
| Modulus of elasticity | 28 x 10(6) psi |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of |
| Thermal conductivity | 8.7 Btu/hr ftoF |
| Heat capacity | 0.12 Btu/ lb oF |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
For comprehensive information on our stainless steel rods, please reach out to Daxun
- GENERAL PROPERTIES
The Standard Martensitic Stainless Steel Bar 410 stands out as the material of choice for components exposed to strenuous conditions, thanks to its superb corrosion resistance, exceptional strength, and remarkable hardness. Alloy 410 round bar boasts a chromium content of no less than 11.5%, ensuring robust protection against corrosion in steam, varied chemical environments, and mild atmospheric conditions. This versatile grade is commonly delivered in a hardened yet machinable state, ideal for applications demanding high strength alongside moderate heat and corrosion resistance. For optimal corrosion resistance, polishing, tempering, and hardening treatments are recommended. Specifications: UNS S41000
APPLICATIONS:
- Cutlery
- Steam and gas turbine blades
- Kitchen utensils
- Bolts, nuts, screws
- Pump and valve parts and shafts
- Mine ladder rungs
- Dental and surgical instruments
- Nozzles
- Hardened steel balls and seats for oil well pumps
CORROSION RESISTANCE:
- Exhibits good corrosion resistance to atmospheric corrosion, mildly corrosive conditions, and drinking water. When properly cleaned after use, it performs exceptionally well in daily activities such as sports and food preparation. Highly resistant to low concentrations of moderate organic and mineral acids, ensuring it does not corrode.
Features:
- Magnetic in both annealed and hardened conditions.
- Capable of developing a broad range of properties when subjected to varying heat treatments.
- Outstanding corrosion resistance to acids such as sulfuric acid.
Available Stock Sizes:
Please refer to specific product pages for unique sizes. Feel free to contact us for a quote on any custom size orders.
SS 410 grade stainless steel round bars
SS 410 stainless steel round bars are highly versatile and widely utilized, from construction to automotive components. Given their diverse applications, Daxun Alloys provides these round bars in an array of grades and sizes. Our advanced cutting service ensures precise adherence to your specifications each time.
Can you provide SS grinding bars and rods?
Yes, we specialize in producing SS grinding bars and rods with unparalleled precision in dimension, roundness, and straightness. These products surpass the quality of standard stainless steel polished bars, though they do come with a higher processing cost.
Q1: What types of products can you offer?
A: We offer a comprehensive range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L.
Additionally, we provide 400 series stainless steel, duplex stainless steels like 2205, 2304, 2101, 2507, and high-nickel alloys such as 904L, 800H, 600H.
Q2: Can you manufacture products based on my custom drawings?
Yes, we can tailor our production processes to meet your specific drawings and requirements, ensuring your utmost satisfaction.
Q3: How does your factory ensure quality control?
Quality is our top priority. We implement stringent quality control measures throughout the entire production process, from start to finish.
Q4: Can I request changes in packaging and transportation?
Yes, we can modify the packaging and transportation methods according to your specifications,
but please note that you will need to cover any additional costs and differences incurred during this period.
Q5: How does your factory handle quality control?
Quality is our top priority. We maintain rigorous quality control procedures from the beginning to the end of the production process.
Q6: What is your delivery time?
A: Our standard delivery time is 7-20 working days after payment confirmation.
For urgent orders, we can expedite production to meet your needs.
Q7: What are your payment terms?
A: 100% T/T in advance or Western Union for small orders.
B: 30% T/T deposit with the remaining 70% due before shipment.
C: 100% Irrevocable Letter of Credit (LC) at sight for large orders.
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for applications such as stainless steel pots, sinks, and bowls. Please inform us of your specific usage, and we will adjust the mechanical properties accordingly to meet your requirements.
Q9: How can I obtain a sample?
A: We provide FREE samples for your evaluation and testing. For small pieces, we may cover the courier cost depending on the situation.
Q10: To which countries have you exported?
A: We have successfully exported our stainless steel materials to numerous countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, and Ukraine, among others.
Address:
B108, No. 32-1, Chengnan Road, Xinwu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, HQE, IFS
Company Introduction:
Founded in 2003, Daxun Alloy is a leading global metal material manufacturer. Headquartered in Wuxi, China, the company has multiple production bases and sales offices around the world. Daxun Alloy focuses on the development, production and sales of various stainless steels, titanium alloys, high-temperature alloys, etc. For general industry, construction, aerospace, energy, chemical industry, medical and other fields.
China, Daxun Metal Group is a global vertically integrated metal material manufacturer and stockist. Daxun can provide finished products and customized full-process services and professional technical services. Currently, the group has 600 employees and covers a total area of 130, 000 square meters. Daxun has a standing inventory of 50, 000 tons of stainless steel, 5, 000 tons of nickel-based alloys, and 2, 000 tons of pure titanium and titanium alloys. The main product forms are metal plates, metal coils, metal pipes, and metal bars. The metal materials produced by Daxun are market leaders for marine, energy, military, general industrial and aerospace applications. In addition, the company also produces seamless pipes, plates, forgings and other metal materials for power generation and oil and gas applications; Commercial and military alloy products; And metal alloys and other metal products for the forging industry.
