Basic Info.
Model NO.
410 stainless steel rod
Type
Stainless Steel Bars
Standard
ASTM, AISI, GB, JIS, DIN, EN
Certification
ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
Manufacturing
Hot Rolling, Cold Rolling, Forging
Trademark
TISCO POSCO Baosteel
Transport Package
Wooden Box or Wooden Pallet
Specification
φ 3.0mm-350mm
Product Description
| Product Parameters: Stainless Steel rod |
| Material | 410 |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. |
| Under Third Party Inspection |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Global Leader in Stainless Rod and Round Bar Fabrication Services
ASTM A479 AISI 410 Stainless Steel Round Bar, ASTM A479 SS 410 Square Bar, 410 Stainless Steel Flat Bar, Stainless Steel 410 Rod. Extensive range of Stainless Steel 410 Round Bar, SS 410 Round Bar, SS DIN 1.4006 Round Bar manufacturers. Buy Stainless Steel 410 Bright Bar, 410 SS Polished Bar, SS 410 Rod suppliers, China AISI SS 410 Round Bar producers.
Hot Rolled Stainless Steel Rod
Our stainless steel rods and bars undergo extensive heating and rolling through multiple passes in a rolling mill. The result? Complete specifications and performance that meets all industry standards and requirements.
Cold Drawn Bright Stainless Steel Rods
Our cold-drawn stainless steel rods are crafted under cold working conditions, offering a smooth surface that can further be polished and ground for a flawless finish.
Forged Stainless Steel Rod and Bar
Our forged stainless steel rods are meticulously forged multiple times, enhancing their mechanical properties and significantly increasing their strength.
General Properties
Our extensive network of service centers ensures a fast, ready supply of common bar sizes and alloys. We also produce custom-sized stainless steel bars. If quantities are below the factory minimum, we arrange a stocking program for prompt turnaround. Daxun Alloys stocks stainless steel round bars from 1/16" to 26" in diameter, available in nearly every grade of stainless steel including 302, 303, 304/L, 309/S, 310/S, 316/L, 317/L, 321, 321/H, 347, 347H, 410, 416, 420, 440C, 17-4PH, Duplex 2205, and Alloy 20.
Additional Services
Our unique processed bar grade inventory primarily consists of stainless steel round bars melted to consistent standards, improving machinability and reducing the total cost per part. Our state-of-the-art bar processing machinery ensures Daxun Alloys can meet the precise specifications demanded by our customers.
1. Heat Treatments: Daxun can perform heat treatments on our stainless steel bars, depending on the metal's chemistry. 2. Positive Material Identification (PMI): We complete in-house or independent lab PMI testing as needed. 3. Ultrasonic Testing (UT): Utilizes high-frequency sound energy for defect detection, dimensional measurement, and more.
For more information on stainless steel rods, please contact Daxun
410 Stainless Steel Rod Chemical Composition
| UNS No | S41000 |
| EN | 1.4006 |
| AISI | 410 |
| Carbon (C) | 0.08/0.15 |
| Silicon (Si) | 1 |
| Manganese (Mn) | 1 |
| Phosphorus (P) | 0.04 |
| *** (S) | 0.03 |
| Chromium (Cr) | 11.5/13.5 |
| Molybdenum (Mo) | |
| Nickel (Ni) | 0.75 |
410 Stainless Steel Rod Mechanical Properties
| Property | Value |
| Density | 7.8 g/cc |
| Yield Strength | 1,225 MPa at a strain of 0.2% |
| Ultimate Tensile Strength | 1,525 MPa |
| Hardness | 126-192 Brinell hardness (annealed condition) 201-255 Brinell hardness (when hardened and tempered) |
| Bulk Modulus | 200 GPa |
| Melting Point | 1,480-1,530 °C |
| Corrosion Resistance | Good corrosion resistance in mild atmospheric environments, water, and some mild chemical environments. It shows pitting corrosion and brown staining in salt water conditions and offers lower resistance to acidic environments than the austenitic stainless steel alternatives. |
| Magnetism | Permeability 700-1,000. Highly responsive to magnetic fields, act as a strong magnetic flux carrier due to its martensitic structure. |
410 Stainless Steel Rod Physical Properties
| Density (lb./ in^2) @ RT | | 0.28 |
| Modulus of Elasticity in Tension (psi x 10^6) | | 29 |
| Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.11 |
| Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 14.4 |
| | 932oF | 16.6 |
| Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 5.5 |
| | 32 to 1,200oF | 6.5 |
| Electrical Resistivity (micro ohms - cm) | at 70oF | 22.5 |
Daxun's Stainless Steel Rods Manufacturing Capabilities
Our forming capabilities feature state-of-the-art radial forging machines, heat treatment and melting furnaces, rolling mills, and a unique hydroforming process for manufacturing titanium rods and parts.
Daxun's Heat Treatment Furnace
Our advanced heat treatment furnaces ensure the stability and high performance of our stainless steel rods.
Daxun's Smelting Ability
Daxun Stainless Steel utilizes the world's most advanced vacuum induction furnace, vacuum consumable furnace, and electroslag furnace to reduce impurities and enhance the performance of our finished stainless steel rods.
Let us be your reliable and distinguished supplier of stainless steel rods
Our stainless steel products are fully certified and traceable, ensuring the utmost quality and reliability. We proudly supply top-tier stainless steel to leading industries such as aerospace, industrial, medical, marine, and military sectors.
Mechanical properties of various grades of stainless steel bars: Discover the robust mechanical properties of our high-grade stainless steel bars, designed to meet diverse industrial needs and standards.
| | Tensile Strength | Yield Strength | | | | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. |
| Grade | Tensile Str | Yield Str | Elong | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell B (HR B) max | Brinell (HB) max |
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| | Tensile Strength | Yield Strength | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell C (HR C) | Brinell (HB) |
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
2507/
S32750 | Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi |
| Ultimate Tensile Strength | 116 ksi |
| 0.1% Offset Yield Strength 0.2% | 91 ksi |
| Elongation in 2 inches, % | 15% |
| Hardness Rockwell C | 32 |
| Impact Energy | 74 ft.-lbs |
| Density | 0.28 lb per inch3 |
| Modulus of elasticity | 28 x 10(6) psi |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of |
| Thermal conductivity | 8.7 Btu/hr ftoF |
| Heat capacity | 0.12 Btu/ lb oF |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
For more information on stainless steel rods, please contact Jiangsu Daxun Alloy Co., Ltd.
- GENERAL PROPERTIES
Standard Martensitic Stainless Steel Bar 410 is renowned for its application in parts subject to severe stresses, boasting exceptional corrosion resistance coupled with high strength and hardness. Containing a minimum of 11.5% chromium, the Alloy 410 round bar exhibits remarkable corrosion resistance in steam, various mild chemical environments, and gentle atmospheric conditions. This versatile grade is typically supplied in a hardened yet machinable state, ideal for applications demanding high strength and moderate heat and corrosion resistance. Peak corrosion resistance is attained when the round bar 410 is polished, tempered, and hardened. Specifications: UNS S41000.
APPLICATIONS:
- Cutlery
- Steam and gas turbine blades
- Kitchen utensils
- Bolts, nuts, screws
- Pump and valve parts and shafts
- Mine ladder rungs
- Dental and surgical instruments
- Nozzles
- Hardened steel balls and seats for oil well pumps
CORROSION RESISTANCE:
- Exhibits robust corrosion resistance to air corrosion, mildly corrosive environments, and drinking water. With proper post-use cleaning, it can handle daily activities such as sports and food preparation. Highly resistant to low concentrations of moderate organic and mineral acids, ensuring no corrosion.
Features:
- Magnetic in both annealed and hardened states.
- Can develop a wide array of properties when heated differently.
- Exhibits excellent corrosion resistance to acids, including sulfuric acid.
Available Stock Sizes:
Refer to specific product pages for unique sizes and contact us for quotes on custom size orders.
SS 410 grade stainless steel round bars
410 Stainless steel round bars are extensively used across multiple industries, from construction to automotive parts. With a diverse range of applications, Daxun Alloys offers these stainless steel round bars in various grades and sizes. Our advanced cutting service ensures precise fulfillment of your requirements every time.
Can you manufacture SS grinding bars & rods?
Absolutely, we specialize in producing SS grinding bars & rods with precise dimensions, roundness, and straightness. These outperform standard stainless steel polished bars, though they do incur higher processing costs.
Q1: What range of products can you supply?
A: We offer a variety of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300, along with
400 series, and duplex stainless steel such as 2205, 2304, 2101, 2507, etc. Additionally, we supply high-nickel alloys like 904L, 800H, and 600H.
Q2: Can you manufacture products based on my drawings?
A: Yes, we can custom-produce products according to your drawings, ensuring they meet your exact specifications and satisfaction.
Q3: How does your factory manage quality control?
A: Quality is our top priority. We maintain stringent quality control measures from the start to the end of the production process.
Q4: Can I request changes to the packaging and transportation method?
A: Yes, we can adjust the packaging and transportation methods as per your request,
but you will be responsible for any additional costs incurred during this process.
Q5: How does your factory manage quality control?
A: Quality is our top priority. We maintain stringent quality control measures from start to finish.
Q6: What is your typical delivery time?
A: Generally, it takes 7 to 20 working days after payment confirmation.
If the order is urgent, we can expedite the process to meet your timeline.
Q7: What are your payment terms?
A: 100% T/T in advance, Western Union (for small orders)
B: 30% T/T with a 70% balance before shipment
C: 100% Irrevocable LC at sight (for large orders)
Q8: Can you provide DDQ (Deep Drawing Quality) material?
A: Yes, we provide DDQ material suitable for stainless steel pots, sinks, bowls, etc. Share your usage details, and we will tailor the mechanical properties to meet your requirements.
Q9: How can I obtain a sample?
A: We offer FREE samples for your evaluation. For small pieces, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, UAE, Ukraine, and more.
Address:
B108, No. 32-1, Chengnan Road, Xinwu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, HQE, IFS
Company Introduction:
Founded in 2003, Daxun Alloy is a leading global metal material manufacturer. Headquartered in Wuxi, China, the company has multiple production bases and sales offices around the world. Daxun Alloy focuses on the development, production and sales of various stainless steels, titanium alloys, high-temperature alloys, etc. For general industry, construction, aerospace, energy, chemical industry, medical and other fields.
China, Daxun Metal Group is a global vertically integrated metal material manufacturer and stockist. Daxun can provide finished products and customized full-process services and professional technical services. Currently, the group has 600 employees and covers a total area of 130, 000 square meters. Daxun has a standing inventory of 50, 000 tons of stainless steel, 5, 000 tons of nickel-based alloys, and 2, 000 tons of pure titanium and titanium alloys. The main product forms are metal plates, metal coils, metal pipes, and metal bars. The metal materials produced by Daxun are market leaders for marine, energy, military, general industrial and aerospace applications. In addition, the company also produces seamless pipes, plates, forgings and other metal materials for power generation and oil and gas applications; Commercial and military alloy products; And metal alloys and other metal products for the forging industry.
