| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | Gr5 Ti-6al-4V Gr7 Gr9 Gr23 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN offers an extensive range of commercially pure titanium plates (Gr1, Gr2, Gr3, Gr4 - UNS), with thicknesses spanning from 0.5 mm to 120 mm. These grades are the cornerstones of the commercially pure titanium family, combining exceptional strength, ductility, and superior corrosion resistance, making them indispensable for numerous industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates epitomize commercially pure titanium, striking an exquisite balance between strength and ductility. They boast impressive impact strength and are effortlessly weldable. These grades excel in corrosion resistance across highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***, as well as demonstrating outstanding resistance to seawater and salt solutions.
Gr5 grade5 Ti6al4v titanium plate, an α-β type titanium alloy, comprises 90% titanium, 6% aluminum, and 4% vanadium. In this alloy, aluminum stabilizes the α phase while vanadium stabilizes the β phase. Distinguished by its exceptional comprehensive performance and superior process capabilities, the TC4 titanium alloy offers remarkable strength at both room and elevated temperatures, excellent creep resistance, thermal stability, high fatigue performance, and *** growth resistance in seawater. Furthermore, it provides satisfactory fracture toughness and resistance to hot salt stress corrosion. Gr5 Ti-6Al-4V titanium alloy plate also demonstrates excellent process plasticity and superplasticity, making it suitable for various processing, welding, and machining methods.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-rolled Titanium Plate: This superior titanium plate is meticulously crafted through a plate rolling process, culminating in a precise final cold rolling step. These sheets are available in either a work-hardened or heat-treated condition. Tailored to meet specific customer requirements, further processing can include advanced mechanical or chemical treatments. 2. Hot-rolled Titanium Plate: Produced with exceptional precision through longitudinal rolling and both longitudinal and transverse rolling techniques, these plates vary in thickness from 3.0mm to 155mm. Delivered in a heat-treated condition, they can undergo creep flattening as an additional heat treatment to eliminate internal stress and ensure special flatness requirements. These sheets are also available as cut blanks, tailored into complex shapes as per customer specifications.3. Forged Titanium Plate: Specially produced by forging steel ingots on a vertical hydraulic press followed by precision rolling, or through open die forging methods, these plates come with standard dimensions: thickness up to 580 mm, width up to 2000 mm, and length up to 6000 mm. Dimensions and weight are fully customizable to meet specific agreements between the manufacturer and the customer.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a premier Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate manufacturer and supplier from China, is committed to producing the world's finest high-performance titanium alloy plates. We offer rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our Grade 5 titanium plates (UNS R56400) are available in thicknesses from 0.5mm to 300mm (with 0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm and above forged). Grade 5 titanium plate (Ti-6Al-4V) is the quintessential titanium alloy material, renowned for its high strength, ductility, excellent corrosion resistance, and high temperature endurance, making it a top choice for both general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN standards.
The Ti-6Al-4V Grade 5 titanium plate is prominently utilized in aerospace, military sectors, power industry, vehicle armor, rocket precision guidance components, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a foremost global producer and supplier of premium Grade 1 titanium plates.
The Pure Grade 1 titanium plate stands out for its exceptional ductility and cold formability, making it perfect for deep drawing applications. Known for superior general and seawater corrosion resistance, it withstands oxidizing, neutral, and mildly reducing media, including chlorides. With its low density (about half that of nickel-based alloys), high strength-to-weight ratio, and corrosion resistance, Grade 1 titanium is ideal for various harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, boasting excellent cold formability, corrosion resistance, weldability, and impact hardness.
Our offerings include ASTM B265 Titanium Grade 1 Plates, Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. We are leading manufacturers and suppliers of Titanium Grade 1 Sheets and Plates in China.
Grade 2
At DAXUN, we manufacture and stock commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the mainstay of the commercially pure titanium family, offering a superior blend of strength, ductility, and excellent corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium product, strikes an ideal balance between strength and ductility. It boasts good impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. It also excels in resisting seawater and salt solutions.
Given its low density, high strength-to-weight ratio, and corrosion resistance, titanium is ideal for a multitude of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for numerous industrial applications requiring robust ductility and corrosion resistance.
At DAXUN, we are titanium experts dedicated to both small and large plate projects. As your definitive point of reference and long-term partner, DAXUN is poised to supply titanium plates and provide any technical assistance required. Beyond being your supplier of industrial pure titanium plates and titanium alloy plates, we are your strategic partner, ready to help overcome any challenges and meet your project needs, ensuring you achieve your goals effortlessly.
At Jiangsu Daxun Alloy Co., Ltd., our premier service center in China boasts a stocked inventory of top-notch titanium plate products, ensuring rapid order fulfillment. Leveraging advanced basic processing techniques, precise water jet cutting, and efficient plate nesting solutions, we deliver unparalleled value to our customers, significantly reducing both time and expenses.
Through unwavering investment in cutting-edge production facilities and strategic capacity agreements with our esteemed partners, Jiangsu Daxun Alloy Co., Ltd. consistently sets the industry standard for titanium plate quality. We are committed to maintaining our leadership now and in the future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today to secure the most competitive prices and comprehensive technical information on our superior titanium plates.
Q1: What products can you offer?
A: We offer a wide range of general steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L. Additionally, we provide 400 series and duplex stainless steels like 2205, 2304, 2101, and 2507, along with high-nickel alloys including 904L, 800H, and 600H.
A: We offer a comprehensive selection of steels including the 400 series and high-performance duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products tailored to your specific drawings to ensure utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We rigorously control and monitor quality from the initial stages to the final production to ensure the highest standards.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods as per your request.
However, you will need to cover any additional costs or differences that arise during this period.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We rigorously control and monitor quality from the initial stages to the final production to ensure the highest standards.
Q6. How long is the delivery time?
A: Delivery time ranges from 7 to 20 working days after payment confirmation.
If your order is urgent, we will expedite the production process to meet your deadlines.
Q7. What are your payment terms?
A: We offer several payment options: 1. 100% T/T in advance 2. Western Union for small orders 3. 30% T/T with the balance of 70% before shipment 4. 100% Irrevocable LC at sight for large orders
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for manufacturing stainless steel pots, sinks, bowls, and more. Let us know your specific use case, and we will adjust the mechanical properties to meet your requirements.
Q9: How to get a sample?
A: We offer FREE samples for your evaluation and testing. If you need a small piece, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported our stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}