| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys proudly holds its position as a leading global producer and supplier of premium Grade 1 titanium plates, known for their impeccable quality.
Pure Grade 1 titanium plates from DAXUN offer exceptional ductility and cold formability, making them perfect for deep drawing applications. Renowned for their outstanding resistance to general, seawater, and various chemical corrosion, Grade 1 titanium is an ideal choice for harsh environments. This material boasts a low density (about half that of nickel-based alloys), a remarkable strength-to-weight ratio, and excellent weldability. Its superior cold formability and impact hardness make it versatile for numerous industrial applications.
As premier producers of ASTM B265 Titanium Gr 1 Plates, DAXUN offers an array of products including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. With a strong presence in China, we cater to diverse needs by manufacturing under stringent standards.
At Daxun, we pride ourselves on providing customers with timely and efficient delivery of Grade 1 titanium plate products. Our robust system supports every stage, from production capacity and information flow to logistics and capital management. Real-time data integration with our logistics system ensures seamless operations. Strategically located near highways, rivers, and seas, our processing center guarantees quick response, efficient scheduling, and smooth storage and transportation, ensuring on-time project completion.
Grade 1 titanium plates, characterized by their lower density and remarkable ductility, are perfect for industries requiring careful weight management and deep drawing capabilities. Major applications include the medical, chemical equipment, and aerospace industries. The exceptional strength and corrosion resistance of Grade 1 titanium also make it ideal for marine, chemical processing, and desalination environments. Typical uses range from oil and gas components, reaction and pressure vessels, piping systems, power systems, heat exchangers, linings, flue gas desulfurization systems, to a myriad of industrial components. Adherence to standards like ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972 ensures reliability and quality.
For Grade 1 Titanium Plates, Daxun covers a comprehensive thickness range from 0.3 mm to 155 mm. Cold rolled plates are available from 0.3 mm to 6.0 mm, while hot rolled plates range from 4.76 mm to 155 mm. These plates are supplied in either hot rolled or heat treated conditions, with longitudinal and transverse rolling processes. If specific flatness is necessary, creep flattening can be employed as a heat treatment. Customizations include cut blanks, with mechanical or chemical processing catered to client needs.
About the chemical composition of(Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is your premier metal expert, specializing in both small and large titanium plate projects. As your dedicated partner, DAXUN is ready to offer not just high-quality titanium plates but also any technical assistance you might require. Consider DAXUN not merely as a supplier of industrial pure titanium plates and titanium alloy plates, but as your strategic ally, poised to navigate any challenges and meet all your needs, ensuring the successful achievement of your project goals.
DAXUN's state-of-the-art service center in China ensures rapid order processing with a robust inventory of titanium plate products. By offering basic processing, water jet cutting, and plate nesting services, we add significant value for our customers, helping them save both time and costs.
Through continuous investment in advanced production facilities and strategic capacity agreements with our partners, DAXUN ensures it remains at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Dedicated to producing the world's highest-performance titanium alloy plates, we offer fast global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our inventory includes Grade 5 titanium plates (UNS R56400) with thicknesses from 0.5mm to 300mm (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and above 50mm forged). Grade 5 titanium plate (Ti-6Al-4V) stands as the workhorse of titanium alloys, renowned for its high strength, ductility, excellent corrosion resistance, and high temperature tolerance, making it ideal for both general and military applications. Compliant with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military, power industries, vehicle armor, precision rocket guidance components, and the marine sector.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of top-tier Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it perfect for deep drawing applications. Known for its outstanding seawater and general corrosion resistance, Grade 1 titanium resists oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and corrosion resistance make it an excellent choice for a variety of harsh chemical environments. Commercially pure Grade 1 titanium is the most ductile and softest, featuring excellent cold formability, superb corrosion resistance, outstanding weldability, and impressive impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, including Titanium Gr 1 Sheets, Finished Plates, Coil Suppliers, Pure Titanium Hot Rolled Plates, Cold Rolled Plates, ASTM B265 Gr 1 Sheets, Gr 1 Patterned Plates Dealers, Perforated Plates, and Titanium Grade 1 Sheets and Plates Manufacturers in China.
Grade 2
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the workhorse of the commercially pure titanium family, offering a perfect blend of high strength, ductility, and excellent corrosion resistance for a myriad of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium solution providing an excellent balance of strength and ductility. It boasts good impact strength, easy weldability, and superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it offers outstanding resistance to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and remarkable corrosion resistance, titanium is ideal for numerous applications. It effectively combats stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications requiring excellent ductility and corrosion resistance.
DAXUN is your go-to expert for both small and large titanium plate projects. As your reference point and long-term partner, DAXUN is prepared to provide you with top-quality titanium plates and any technical assistance you might need. Consider DAXUN not only as your supplier of industrial pure titanium and titanium alloy plates but also as your strategic ally in overcoming any challenges and meeting your project goals.
At DAXUN's premier service center in China, we maintain a robust inventory of titanium plate products to guarantee swift order processing. Leveraging advanced techniques such as basic processing, precision water jet cutting, and efficient plate nesting, we deliver unparalleled value to our esteemed customers, significantly reducing their time and expenses.
Our unwavering commitment to continuous investment in DAXUN's state-of-the-art production facilities, coupled with strategic capacity agreements with our esteemed partners, ensures that DAXUN remains the industry leader in titanium plate quality, both today and in the promising future.
Reach out to DAXUN today for the most up-to-date titanium plate pricing and comprehensive technical information to meet all your needs.
Q1: What products can you offer?
A: We offer a diverse range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316L, all from the 300 series.
Additionally, we provide the 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, and specialized high-nickel alloys like 904L, 800H, and 600H.
Q2: Can you produce products according to my drawings?
A: Absolutely, we can manufacture products based on your drawings to meet your specific requirements.
Q3: How does your factory handle quality control?
A: Quality is our top priority. We emphasize stringent quality control measures from inception to completion.
Q4: Can I request changes to packaging and transportation?
A: Yes, we can adapt the packaging and transportation methods to meet your requests.
However, you will need to cover any additional costs and differentials incurred during this process.
Q5: How does your factory handle quality control?
A: Quality is a top priority for us, and we implement rigorous quality control from start to finish.
Q6: What is the delivery time?
A: Our standard delivery time ranges from 7 to 20 working days after payment confirmation.
If your order is urgent, we can expedite the process to meet your timeline.
Q7: What payment methods do you accept?
A: We accept 100% T/T in advance and Western Union for small orders.
B: For larger orders, we accept 30% T/T with the 70% balance due before shipment.
C: 100% Irrevocable LC at sight is also available for significant orders.
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, and more. Just specify your requirements, and we'll adjust the mechanical properties accordingly.
Q9: How can I obtain a sample?
A: We offer FREE samples for your evaluation. If a small piece is required, we can cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have successfully exported stainless steel materials to countries such as Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}