| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global producer and supplier of superior-grade Grade 1 titanium plates.
Pure Grade 1 titanium plates by DAXUN boast exceptional ductility and cold formability, making them perfect for deep drawing applications. Renowned for their outstanding general and seawater corrosion resistance, as well as their resilience against various oxidizing, neutral, and mildly reducing media-including chlorides-Grade 1 titanium plates are an optimal choice for numerous harsh chemical environments. With low density (approximately half that of nickel-based alloys), a high strength-to-weight ratio, and remarkable corrosion resistance, these plates excel in diverse challenging conditions. The commercially pure Grade 1 titanium is the softest and most ductile, offering excellent weldability, good impact hardness, and superior cold formability.
Producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, Finished Plates, and Coils. Suppliers of Pure Titanium Hot Rolled Plates, Cold Rolled Plates, Titanium Grade 1 Patterned and Perforated Plates. Renowned manufacturers and dealers of Titanium Grade 1 Sheets and Plates in China.
At Daxun, we ensure prompt and efficient delivery of Grade 1 titanium plate products. Our rapid delivery is backed by a robust system encompassing production capacity, information, logistics, and capital flow. For instance, our order data flows seamlessly to the logistics system in real time. Strategically located processing centers near highways, rivers, and seas, combined with coordinated scheduling and prompt responses, facilitate efficient storage, transportation, and loading, ensuring timely task completion.
With lower density and greater ductility, Grade 1 titanium plates are ideally suited for industries prioritizing weight and deep drawing processes, such as medical, chemical equipment, and aerospace sectors. Their high strength and corrosion resistance also make them indispensable for marine, chemical processing, and desalination applications. Typical uses include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Adhering to standards such as ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972 ensures reliability and quality.
For Grade 1 Titanium Plates, the cold rolled thickness ranges from 0.3 mm to 6.0 mm, while the hot rolled thickness spans from 4.76 mm to 155 mm. Supplied in hot rolled or heat-treated conditions, these plates are produced through longitudinal and transverse rolling. When necessary, creep flattening heat treatment can be applied to relieve internal stresses and meet special flatness requirements. Plates are available in cut blank forms, shaped from parent plates, and can be further processed mechanically or chemically based on customer specifications.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
At DAXUN, we are your go-to metal experts for both small and large titanium plate projects. As your trusted reference point and long-term partner, DAXUN is dedicated to supplying your business with top-quality titanium plates and providing any technical assistance you may require. Think of DAXUN not merely as a supplier of industrial pure titanium plates and titanium alloy plates, but as a strategic partner committed to helping you navigate challenges and meet your needs. Our ultimate goal is to empower you to achieve your project objectives with unparalleled precision and efficiency.
DAXUN's state-of-the-art service center in China boasts a robust inventory of titanium plate products, ensuring rapid order processing. Through advanced basic processing techniques, water jet cutting, and expert plate nesting, we add exceptional value for our customers, significantly reducing both time and costs.
Our unwavering commitment to continuous investment in production facilities and strategic capacity agreements with partners positions DAXUN at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a premier manufacturer and supplier based in China, excels in producing Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates. Our mission is to deliver world-class high-performance titanium alloy plates at lightning speed across the globe. Adhering to ASTM B265 standards, we offer Grade 2 and Grade 5 Titanium Plates with thicknesses from 0.5mm to 300mm. Our Grade 5 titanium plate (Ti-6Al-4V) is renowned for its exceptional strength, ductility, and corrosion and high-temperature resistance, making it indispensable in both general and military industries. Compliance with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more ensures our products meet the highest quality benchmarks.
Our Ti-6Al-4V Grade 5 Titanium Plates are pivotal in aerospace, military, power industries, vehicle armor, rocket precision guidance systems, and marine applications.
Grade 1
DAXUN Alloys stands as a premier global producer and supplier of top-tier Grade 1 titanium plates, setting benchmarks in quality and performance.
Pure Grade 1 titanium plates from DAXUN are synonymous with excellent ductility and cold formability, perfect for deep drawing applications. Known for outstanding general and seawater corrosion resistance, as well as resistance to oxidizing, neutral, and mildly reducing media, including chlorides, Grade 1 titanium boasts low density, high strength-to-weight ratio, and unparalleled corrosion resistance. These attributes make it an ideal choice for harsh chemical environments. Additionally, Grade 1 titanium is the softest, most ductile, offering superb cold formability, corrosion resistance, weldability, and impact hardness.
We are proud producers of ASTM B265 Titanium Grade 1 Plates, offering a range of products including sheets, finished plates, coils, hot rolled plates, cold rolled plates, patterned plates, and perforated plates. As leading manufacturers in China, we adhere to the highest standards to deliver nothing but excellence.
Grade 2
At DAXUN, we stock and produce commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate stands as the 'workhorse' of the commercially pure family, blending high strength, ductility, and excellent corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate, a hallmark of commercially pure titanium, strikes a perfect balance between strength and ductility. It offers excellent impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Grade 2 titanium also excels in resisting seawater and salt solutions.
With its low density, high strength-to-weight ratio, and robust corrosion resistance, titanium is an unrivaled material for various applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Its melting point of 1660°C makes it the optimal choice for industrial applications demanding exceptional ductility and corrosion resistance.
DAXUN is your go-to expert for all titanium plate projects, whether big or small. We are not just a supplier, but your strategic partner, offering industrial pure and titanium alloy plates along with any technical assistance required. Trust DAXUN to help you overcome challenges and achieve your project goals with excellence and precision.
At DAXUN's premier service center in China, we maintain a comprehensive stock of titanium plate products ensuring rapid order fulfillment. Our advanced capabilities include fundamental processing, precision water jet cutting, and efficient plate nesting solutions. These services are meticulously designed to deliver exceptional value, significantly reducing both time and costs for our esteemed clients.
DAXUN's unwavering commitment to continuous investment in cutting-edge production facilities, combined with strategic capacity agreements with our partners, fortifies our leadership in titanium plate quality. We pride ourselves on consistently setting the benchmark for excellence, both now and in the future.
Connect with DAXUN today to access the most competitive titanium plate pricing and comprehensive technical insights. Our dedicated team is ready to provide you with the latest information and support for all your titanium needs.
Q1: What products can you offer?
A: We offer a diverse range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and the 300 series.
Additionally, we provide 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, etc., along with high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Yes, we can manufacture products based on your precise drawings to ensure utmost satisfaction.
Q3. How does your factory manage quality control?
A: Quality is our top priority. We emphasize rigorous quality control from start to finish.
Q4. Can I request to change the form of packaging and transportation?
A: Certainly. We can modify the packaging and transportation according to your preferences,
although you will be responsible for any additional costs and expenses incurred during this period.
Q5. How does your factory manage quality control?
A: Quality is paramount to us. We maintain strict quality control measures from the outset to the final stages.
Q6. How long is the delivery time?
A: Delivery typically takes 7-20 working days after payment confirmation.
In case of urgent orders, we can expedite production to meet your deadlines.
Q7. What are your payment terms?
A: We accept 100% T/T in advance and Western Union for small orders.
B: For larger orders, we require 30% T/T upfront and the remaining 70% before shipment.
C: We also accept 100% Irrevocable LC at sight for significant orders.
Q8: Can you provide Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Let us know your application, and we will adjust the mechanical properties accordingly.
Q9: How can I get a sample?
A: We offer FREE samples for you to check and test. If you need a small piece, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported our stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}