| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! With an unwavering commitment to producing the world's high-performance titanium alloy plates, we provide swift worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we manufacture and stock Grade 5 (UNS R56400) titanium plates with thicknesses varying from 0.5mm to 300mm. Plates from 0.5mm-6.0mm are cold rolled, 6.0mm-50mm are hot rolled, and plates above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is renowned as the "workhorse" of titanium alloys due to its high strength, ductility, and exceptional resistance to corrosion and high temperatures. As a preferred choice in both general and military industries, our plates meet stringent standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 titanium plate boasts a composition of 90% titanium, 6% aluminum, and 4% vanadium. This α-β titanium alloy features aluminum for α phase stabilization and vanadium for β phase stabilization. The plate's key attributes include outstanding comprehensive performance and superior processability. TC4 titanium alloy is distinguished by its excellent strength at room and high temperatures, impressive creep resistance, thermal stability, high fatigue performance, and resistance to *** growth in seawater. Additionally, it offers excellent fracture toughness and hot salt stress corrosion performance. The Ti-6Al-4V titanium plate is highly processable, with extraordinary plasticity and superplasticity, making it ideal for various processing methods and welding techniques.
Ti-6Al-4V Grade 5 titanium plate finds extensive application in aerospace, military, power industries, vehicle armor, rocket precision guidance parts, and marine industries among others.
Grade 5 titanium alloy plate stands out as the most commercially viable among titanium alloys, known for its exceptional strength and toughness. The Ti-6Al-4V Grade 5 titanium alloy offers a comprehensive suite of superior properties:
Ti-6AL-4V titanium plates and sheets are ideal for parts requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), combined with good ductility and lateral strength. Typical applications include: 1. Jet engine compressor blades, disks and rings, fuselage components like wings, turbine disks, doors, bulkheads, military aircraft hardware, engine nozzles, landing gear doors, and superplastic forming parts. 2. Military applications: armor, guidance systems, shell casings. 3. Spacecraft components: ***s, heat shields. 4. Medical and surgical instruments. 5. Sports equipment: bicycle frames, golf clubs. 6. Other high strength-to-weight ratio applications.
Daxun rigorously conducts multiple quality assurance tests such as flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests to ensure material suitability for intended applications. Throughout the production process, we meticulously measure the product's diameter, thickness, and surface. Our standard delivery time is 5-7 days, with a delivery window of 15-20 days for special size products.
Dive into the precise chemical composition of our premium (Ti 6AL-4V) Grade 5 Titanium Sheets, engineered for unmatched performance.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Discover the chemical composition of our high-quality Grade 2 Titanium Sheets, meticulously crafted for durability and reliability.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Explore the robust mechanical properties of our Grade 2 Titanium Sheets, tailored to meet rigorous industrial standards.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is your trusted metal expert, dedicated to both small and large-scale titanium plate projects. As a pivotal reference point and a long-term partner, DAXUN is poised to provide comprehensive titanium plates along with the technical support your business requires. Beyond being a mere supplier, DAXUN stands as your strategic ally, guiding you through challenges and catering to your needs, ensuring your project goals are not just met but surpassed.
DAXUN's state-of-the-art service center in China boasts a comprehensive stock of titanium plate products, enabling rapid order processing. By incorporating basic processing techniques, water jet cutting, and plate nesting products, we deliver exceptional value to our customers, significantly reducing both time and costs.
Our relentless investment in DAXUN's production facilities, coupled with robust capacity agreements with our partners, guarantees that DAXUN remains at the pinnacle of titanium plate quality, both now and in the future.
Get in touch with DAXUN today for the latest competitive prices and comprehensive technical information on our titanium plates.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a premier manufacturer and supplier from China, specializes in Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate. Our mission is to create the world's highest-performing titanium alloy plates and deliver them swiftly across the globe. We offer ASTM B265 Grade 2 and Grade 5 Titanium Plates, stocked in thicknesses ranging from 0.5mm to 300mm. Plates from 0.5mm to 6.0mm are cold rolled, those from 6.0mm to 50mm are hot rolled, and plates 50mm and above are forged. Grade 5 titanium plate (Ti-6Al-4V) is the workhorse of titanium alloy materials, combining high strength, ductility, and excellent resistance to corrosion and high temperatures. This makes it highly favored by both general and military industries. Our plates comply with standards such as ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate is primarily utilized in aerospace, military industries, power generation, vehicle armor, rocket precision guidance parts, and marine applications.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates, recognized for their outstanding quality and durability.
Pure Grade 1 titanium plate offers excellent ductility and cold formability, making it ideal for deep drawing applications. Known for its remarkable general and seawater corrosion resistance, Grade 1 titanium also resists oxidizing, neutral, and mildly reducing media, including chlorides. Its low density, high strength-to-weight ratio, and corrosion resistance make it an excellent choice for various harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile of the grades, providing good cold formability, exceptional corrosion resistance, superior weldability, and good impact hardness.
DAXUN produces and supplies a wide range of titanium products, including ASTM B265 Titanium Grade 1 Plates, Sheets, and Coils. Our offerings encompass hot and cold rolled plates, patterned and perforated plates, and more. We are your reliable source for high-quality Titanium Grade 1 products in China.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses spanning from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the workhorse of the commercially pure titanium family, offering high strength, ductility, and excellent corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium that offers an optimal balance of strength and ductility. With good impact strength and superior weldability, it excels in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also boasts excellent resistance to seawater and salt solutions.
Titanium's inherent low density, high strength-to-weight ratio, and resistance to corrosion make it an ideal material for numerous applications. Grade 2 Titanium Plate resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the alloy of choice for industrial applications demanding good ductility and corrosion resistance.
DAXUN is a metal expert specializing in both small and large titanium plate projects. We are your dedicated partner, ready to provide titanium plates and any technical assistance required. Consider DAXUN not only as your supplier of industrial pure titanium plates and titanium alloy plates but also as your strategic partner, committed to helping you overcome challenges and meet your project goals.
At DAXUN's premier service center in China, we maintain an extensive inventory of top-quality titanium plate products, ensuring swift order processing to meet your demands. Utilizing advanced techniques such as basic processing, water jet cutting, and precision plate nesting, we offer unparalleled added value, seamlessly saving our customers both time and costs.
DAXUN remains a leader in titanium plate quality due to our steadfast commitment to continuous investment in state-of-the-art production facilities. Strategic capacity agreements with our esteemed partners fortify DAXUN's position at the pinnacle of excellence, both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical information. Our dedicated team is ready to assist you with all your titanium needs.
){kind=link}