| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | Gr5 Ti-6al-4V Gr7 Gr9 Gr23 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
At DAXUN, we manufacture and stock a comprehensive range of commercially pure titanium plates, including grades Gr1, Gr2, Gr3, and Gr4 (UNS), available in thicknesses from 0.5 mm to 120 mm. These grades are the backbone of the commercially pure titanium family, offering an exceptional combination of high strength, ductility, and outstanding corrosion resistance, suitable for numerous industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates are known for their exceptional balance of strength and ductility. They exhibit impressive impact strength, easy weldability, and superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, these grades offer excellent resistance to seawater and salt solutions, making them highly versatile.
The Gr5 (Grade 5) Ti-6Al-4V titanium alloy plate stands out as an α-β type titanium alloy, comprising 90% titanium, 6% aluminum, and 4% vanadium. Aluminum stabilizes the α phase while vanadium stabilizes the β phase. This alloy is renowned for its exceptional comprehensive performance and excellent processability. With outstanding room temperature and high temperature strength, good creep resistance, thermal stability, high fatigue performance, *** growth resistance in seawater, and satisfactory fracture toughness, Gr5 Ti-6Al-4V is well-suited for various processing, welding, and machining methods.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: Our cold-rolled titanium plates are meticulously crafted through a sophisticated plate rolling process, culminating in the precision of cold rolling. These sheets are available in either a work-hardened or heat-treated condition, tailored to your specific needs. Whether you require mechanical or chemical processing, we accommodate your requirements to deliver optimal results. 2. Hot-Rolled Titanium Plate: Produced through both longitudinal rolling and longitudinal-transverse rolling, our hot-rolled titanium plates offer thicknesses ranging from 3.0mm to 155mm. Delivered in a heat-treated state, these plates can undergo creep flattening to eliminate internal stresses and meet special flatness specifications. We provide sheets as cut blanks, enabling the creation of complex shapes from the parent metal, with further processing customized to your specifications.3. Forged Titanium Plate: Manufactured by forging steel ingots via vertical hydraulic press followed by rolling, or through open die forging combined with rolling, our forged titanium plates are engineered to perfection. Standard slab dimensions reach up to 580 mm in thickness, 2000 mm in width, and 6000 mm in length. All dimensions and weights are customizable, tailored to meet the exacting standards agreed upon between the manufacturer and customer.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Our mission is to create world-class, high-performance titanium alloy plates. We offer rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks and produces grade 5 titanium plates (UNS R56400) in thicknesses ranging from 0.5mm to 300mm (0.5-6.0mm cold rolled, 6.0-50mm hot rolled, and above 50mm forged). Grade 5 titanium plate (Ti-6Al-4V) is renowned as the 'workhorse' of titanium alloys, offering high strength, ductility, exceptional corrosion and high temperature resistance, making it ideal for both general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and other international standards.
Ti-6Al-4V grade 5 titanium plate finds extensive usage in aerospace, military, power industries, vehicle armor, rocket precision guidance components, marine industry, and more.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium-quality Grade 1 titanium plate.
Pure Grade 1 titanium plate is celebrated for its exceptional ductility and cold formability, making it perfect for deep drawing applications. Grade 1 titanium is distinguished by its outstanding general and seawater corrosion resistance, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (approximately half that of nickel-based alloys), a high strength-to-weight ratio, and robust corrosion resistance, Grade 1 titanium is an excellent choice for various harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile variant, featuring excellent cold formability, superior corrosion resistance, exceptional weldability, and good impact hardness.
We are premier ASTM B265 Titanium Gr 1 Plate Producers, offering a diverse range of products including Titanium Gr 1 Sheets, Finished Plates, ASTM B265 Titanium Grade 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. We are your trusted manufacturers and suppliers in China.
Grade 2
DAXUN produces and stocks commercially pure Grade 2 titanium plates (UNS R50400) with thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the 'workhorse' of commercially pure titanium, offering a perfect blend of high strength, ductility, and excellent corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium variant that provides an excellent balance of strength and ductility. It has good impact strength, is easily weldable, and boasts remarkable corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. It also offers excellent resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and robust corrosion resistance make it an ideal material for a broad array of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for numerous industrial applications demanding excellent ductility and corrosion resistance.
DAXUN is a metal expert dedicated to both small and large titanium plate projects. As your reliable reference point and long-term partner, DAXUN is ready to provide you with top-quality titanium plates and any technical support you may need. Beyond being just a supplier of industrial pure titanium and titanium alloy plates, DAXUN is your strategic partner, prepared to help you overcome any challenges and meet your specific needs, ensuring you achieve your project goals.
At DAXUN's premier service center in China, we maintain a robust inventory of titanium plate products, ensuring swift order processing. Leveraging advanced techniques such as basic processing, precision water jet cutting, and efficient plate nesting, we deliver exceptional value to our customers, significantly reducing their time and costs.
DAXUN remains a leader in titanium plate excellence through relentless investment in state-of-the-art production facilities and strategic capacity agreements with our partners. This commitment guarantees unparalleled quality in our titanium plates, both now and in the future.
Reach out to DAXUN today to access the most competitive prices and the latest technical information on our superior titanium plates.
Q1: What products can you offer?
A: We offer a comprehensive range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we provide 316L 300 series and other high-quality options.
400 series, along with duplex stainless steel like 2205, 2304, 2101, 2507, and more. We also specialize in high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can tailor product manufacturing to your specific drawings, ensuring maximum satisfaction.
Q3. How does your factory do regarding quality control?
Quality is our utmost priority. We maintain stringent quality control measures from the very beginning to the final stages of production.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can accommodate changes in packaging and transportation as per your requests.
However, please note that any additional costs incurred during this period and the price differences will be borne by you.
Q5. How does your factory do regarding quality control?
Quality is our utmost priority. We maintain stringent quality control measures from the very beginning to the final stages of production.
Q6. How long is the delivery time?
A: Our typical delivery time is 7 to 20 working days after payment confirmation.
For urgent orders, we expedite the process to ensure timely completion.
Q7. What is your Payment?
A: 100% T/T advance or Western Union for small orders.
B: 30% T/T upfront and the remaining 70% before shipment.
C: For large orders, we accept 100% Irrevocable LC at sight.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are ideal for stainless steel pots, sinks, bowls, and more. Provide your specific usage, and we'll adjust the mechanical properties to suit your needs.
Q9: How to get a sample?
A: FREE samples are available for inspection and testing. If you need a small piece, we can cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How to visit your company?
A: You can fly to Guangzhou Baiyun International Airport, where we will arrange to pick you up.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}