Basic Info.
Model NO.
Gr12 titanium tube
Application
Industrial, Medical
Standards
Astmb861 B862 B338 ASME Sb861 Sb862 Sb338
Titanium Plate Grade
Grade 12 Uns 3.7105
Transport Package
Wooden Box
Specification
φ 6.35mm-φ 1219mm
Product Description
Product Parameters
| Grade 12 Titanium pipe & Tubes Specification | ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862 |
| Grade 12 Titanium pipe & Tubes Grades | Commercially pure titanium Grade 12- TA2- USN 50400 |
| Grade 12 Titanium pipe & Tubes Type | ot Rolled / Cold Drawn / Welded / ERW |
| Grade 12 Titanium pipe & Tubes Outer Diameter Size | Titanium seamless pipe - φ1.0mm to φ508.3mm |
| Titanium welded pipe - φ1.0mm to φ1219mm |
| Grade 12 Titanium pipe & Tubes Wall Thickness | 1.0mm-50mm (customizable wall thickness) |
| Grade 12 Titanium pipe & Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| Titanium pipe Form TA2 | ' Hollow, U' bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc |
| Marking TA2 3.7035 | All Titanium Tubes Tubing are marked as follows: Grade, Standard, Thickness, OD, Heat No., Length (Or according to the customer's request.) |
| Uses of Titanium Alloy Tubes | Gas pipes, oil pipes, heat exchanger tubes, boiler tubes, fluid pipes, titanium exhaust pipes. |
| Grade 12 Titanium pipe & Tubes Pipe Ends | Plain Ends / Beveled Ends |
| Grade 12 Titanium pipe & Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| Grade 12 Titanium pipe & Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| Grade 12 Titanium pipe & Tubes Other Testing | ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc. |
| Grade 12 Titanium pipe & Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| Grade 12 Titanium pipe & Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| Grade 12 Titanium pipe & Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| Grade 12 Titanium pipe & Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| Grade 12 Titanium pipe & Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Detailed Photos
Titanium Grade 12 0.8NI-0.3MO is a commercially pure wrought Titanium alloy. Grade 12 demonstrates excellent strength at high temperatures, excellent weldability, and crevice corrosion resistance. This material is similar to Titanium Grade 2 and Grade 3 with the addition of molybdenum and nickel, which offers enhanced corrosion resistance. Grade 12 can be hot or cold formed using press brake forming, hydropress forming, stretch forming or drop hammer method. This materials ability to be formed in a various of ways makes Grade 12 useful in numerous applications.
Quality, delivery, inspection
Daxun performs several quality assurance tests, these tests include flattening test, flaring test, ultrasonic flaw detection test, pitting and resistance test, mechanical test, hardness test, material positive identification, expansion test, etc. All these tests ensure that the Grade 1 Titanium Welded Pipe and Grade 1 Titanium Seamless Pipe materials are suitable for the required application. During the production process, we measure the diameter, thickness and surface of the products. Our standard delivery time is 5-7 days and the delivery time for special size products is 15-20 days.
- Our delivery time is strictly in accordance with the contract.
- Support customer third-party agencies to go to the factory for inspection
- Support free samples for customer testing
- Support on-site or video factory inspection
Technical Support
If you need any additional technical assistance, our resident metallurgist and knowledgeable staff will be pleased to help. Additionally, Daxun boasts a certified testing laboratory-a first in the multi-metal and plastic inventory industry. This, in our opinion, demonstrates our unwavering dedication to quality and our philosophy as a full-service supplier.
Packaging & Shipping
Company Profile
Titanium Seamless Tubes
Daxun produces:
Hot-finished Titanium Tubes
These tubes are supplied in the form of hot-rolled or hot-extruded, straightened, machined inside and outside diameters, and surface polished. Titanium tubes are available in heat-treated or non-heat-treated forms. Our company has 100% ultrasonic flaw detection capabilities.
Titanium Tube Materials Available:
Hot-rolled Titanium Tubes: OD 19mm to 325mm, wall thickness 9mm to 30mm, length up to 5000mm (to be agreed on a case-by-case basis between the manufacturer and the customer); - Hot-extruded Titanium Tubes: OD 50mm to 160mm, wall thickness 7mm to 35mm, length up to 3000 (to be agreed on a case-by-case basis between the manufacturer and the customer).
Cold-finished Titanium Tubes
Cold-finished Titanium Tubes are supplied in the form of heat-treated, surface-etched, hydrostatically tested, or ultrasonically tested, depending on the requirements of the manufacturing specifications. Tubes Supplied:- OD 6mm to 89mm, wall thickness 0.5mm to 11mm, length up to 6000mm (to be agreed on a case-by-case basis between the manufacturer and the customer).
Titanium Welded Pipes
DaXun manufactures and supplies titanium pipes with diameters from 100 mm. 12.7 to 38.1 mm (0.47 in to 1.5 in), wall thickness from 0.4 to 1.65 mm (0.016 in to 0.065 in, depending on diameter), lengths up to 25000 mm, electrical Gr1, Gr2 and Gr12 titanium alloy pipes for engineering and chemical industries. Titanium welded pipes are made from flat rolled raw material (kelp) by automatic tungsten inert gas (argon) welding on electric pipe welders and heat treated on the mill line. Finished titanium welded pipes undergo mechanical testing, geometrical measurements, 100% ultrasonic and eddy current testing, pneumatic or hydrostatic testing; pipes are packed as per customer specifications. Manufacturing processes and inspection test equipment ensure thin wall welded pipes comply with ASTM B 338, ASME SB 338 standards.
Chemical Composition
The chemical composition of grade 12 Ti 0.3 Mo 0.8 Ni alloy is outlined in the following table.
| Element | Content (%) |
|---|
| Nickel, Ni | 0.6 - 0.9 |
| Iron, Fe | 0.3 max |
| Molybdenum, Mo | 0.2 - 0.4 |
| Oxygen, O | 0.25 max |
| Carbon, C | 0.08 max |
| Nitrogen, N | 0.03 max |
| Hydrogen, H | 0.015 max |
| Titanium, Ti | Remainder |
Physical Properties
The physical properties of grade 12 Ti 0.3 Mo 0.8 Ni alloy are tabulated below.
| Properties | Metric | Imperial |
|---|
| Density | 4.50 g/cm3 | 0.163 lb/in3 |
| Melting point | ≤ 1660°C | ≤ 3020°F |
Mechanical Properties
The following table shows mechanical properties of grade 12 Ti 0.3 Mo 0.8 Ni alloy.
| Properties | Metric | Imperial |
|---|
| Tensile strength | 550 MPa | 79800 psi |
| Yield strength | 380 MPa | 55100 psi |
| Poisson's ratio | 0.37 | 0.37 |
| Elastic modulus | 105 GPa | 15200 ksi |
| Shear modulus | 45.0GPa | 6530 ksi |
| Elongation at break | 12 % | 12 % |
| Hardness, Brinell | 180 - 235 | 180 - 235 |
| Hardness, Knoop | 222 | 222 |
| Hardness, Rockwell C | 11 | 11 |
| Hardness, Vickers | 209 | 209 |
Thermal Properties
The thermal properties of grade 12 Ti 0.3 Mo 0.8 Ni alloy are tabulated below.
| Properties | Metric | Imperial |
|---|
| Thermal expansion co-efficient (@0.000-100°C/32-212°F) | 8.60 µm/m°C | 4.78 µin/in°F |
| Thermal conductivity | 19 W/mK | 132 BTU in/hr.ft².°F |
Certifications
Fabrication and Heat Treatment
Machinability
Grade 12 Ti 0.3 Mo 0.8 Ni alloy can be machined using slow speeds, right quantity of coolant flow and high feed rates. High-speed tools should be used for tooling this alloy and the recommended tool types are tungsten carbide designations C1-C4 or cobalt based.
Forming
Grade 12 Ti 0.3 Mo 0.8 Ni alloy can be hot or cold formed.
Welding
Weldabilty of grade 12 Ti 0.3 Mo 0.8 Ni alloy is rated as excellent.
Annealing
For annealing grade 12 Ti 0.3 Mo 0.8 Ni alloy, the material has to be heated to 732-816°C (1350-1500°F), held for 2 h followed by air cooling. In case of intermediate stress relieving, the material has to be heated to 538-649°C (1000-1200°F) and held for 1 h followed by air cooling.
Forging
Rough forging can be performed at 871°C (1600°F) and completed at 788-843°C (1450-1550°F)
Hot Working
Hot working enhances the overall ductility of the material.
Cold Working
Cold working features of this material is same as that of austenitic stainless steel. Post-work annealing is recommended to re-attain favorable performance properties.
Applications
Grade 12 Ti 0.3 Mo 0.8 Ni alloy is used in the following application areas:
- Pumps
- Valves
- Heat exchangers
- Pipes and fittings
- Chemical processing
- In high temperature chemical manufacturing equipment
- Marine and airframe components
- In medium reducing or variable oxidizing-reducing media - containers
FAQ
Q1: What products can you offer?
A: We can offer you general steel types like 310S, 316L,304.304L.201,904L, 316H, 316,316L 300and
400 series, and duplex stainless steel like 2205, 2304,2101,2507,etc. 904L, 800H, 600H high-nickel alloy.
Q2. Can you produce the products according to my own drawings?
Yes, we can produce the products according to your drawings that will be most satisfy you.
Q3. How does your factory do regarding quality control?
Quality is a priority. We always attach great importance to quality controlling from the beginning to end.
Q4. Can I request to change the form of packaging and transportation?
Yes, We can change the form of the packaging and transportation according to your request,
but you have to bear their own costs incurred during this period and the spreads.
Q5. How does your factory do regarding quality control?
Quality is a priority. We always attach great importance to quality controlling from the beginning to end.
Q6. How long is the delivery time?
A: 7~20 working days after confirming the payment.
If the order is urgent, we will push our workshop finish in advance.
Q7. What is your Payment?
A: 100% T/T advance, Western Union (For Small Order)
B: 30% T/T and balance 70% before the shipment
C: 100% Irrevocable LC at sight (For Big Order)
Q8: Can you make DDQ ( Deep Drawing Quality)?
A: Yes, we can. Our material can be used for stainless steel pots, stainless steel sinks, stainless steel bowls etc. U can tell us your usage, and we will adjust the mechanical propertise to meet your requirement.
Q9: How to get a sample?
A: FREE samples are available for your checking and testing.If you require for a small piece,we can afford courier cost,it depends.
Q10:Which country have you exported to?
A:Until now,we have exported stainless steel material to following countries: Vietnam,Thailand,Turkey,Russia,Maroc,Korea,India,Pakistan,UAE,Ukraine and so on.
Q11: How to visit your company?
A:By flight to Guangzhou Baiyun International airport,then we will pick you up.
Address:
B108, No. 32-1, Chengnan Road, Xinwu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, HQE, IFS
Company Introduction:
Founded in 2003, Daxun Alloy is a leading global metal material manufacturer. Headquartered in Wuxi, China, the company has multiple production bases and sales offices around the world. Daxun Alloy focuses on the development, production and sales of various stainless steels, titanium alloys, high-temperature alloys, etc. For general industry, construction, aerospace, energy, chemical industry, medical and other fields.
China, Daxun Metal Group is a global vertically integrated metal material manufacturer and stockist. Daxun can provide finished products and customized full-process services and professional technical services. Currently, the group has 600 employees and covers a total area of 130, 000 square meters. Daxun has a standing inventory of 50, 000 tons of stainless steel, 5, 000 tons of nickel-based alloys, and 2, 000 tons of pure titanium and titanium alloys. The main product forms are metal plates, metal coils, metal pipes, and metal bars. The metal materials produced by Daxun are market leaders for marine, energy, military, general industrial and aerospace applications. In addition, the company also produces seamless pipes, plates, forgings and other metal materials for power generation and oil and gas applications; Commercial and military alloy products; And metal alloys and other metal products for the forging industry.
