| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN produces and stocks commercially pure Titanium Plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) boasts high strength, remarkable ductility, and excellent corrosion resistance, making it ideal for a multitude of industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium offering, strikes a perfect balance between strength and ductility. It features outstanding impact strength and weldability, coupled with robust corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its superior resistance to seawater and salt solutions renders it indispensable in numerous industrial settings.
Titanium's low density, exceptional strength-to-weight ratio, and formidable corrosion resistance make it an ideal material for diverse applications, effectively resisting stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for industrial applications requiring superior ductility and corrosion resistance.
Grade 2 Titanium Plate's lower density makes it ideal where weight is a concern. Vital industries such as medical, chemical equipment, and aerospace benefit from titanium alloys. Its strength and corrosion resistance also make Grade 2 Titanium Plate indispensable for marine, chemical processing, and desalination applications. Typical uses include oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, flue gas desulfurization systems, and various industrial components. Common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
At Daxun, we perform rigorous quality assurance tests, including flattening, pitting, resistance, mechanical, hardness, material positive identification, and expansion tests, to ensure material suitability for various applications. During production, we meticulously measure the product's diameter, thickness, and surface. Our standard delivery time is 5-7 days, with special size products taking 15-20 days.
Titanium Grade 2 Plates are available in cold-rolled thicknesses ranging from 0.3 mm to 6.0 mm and in hot-rolled or heat-treated conditions from 4.76 mm to 155 mm. These plates are produced via longitudinal and transverse rolling and can be supplied in a cut blank form. Depending on customer requirements, further processing can be mechanical or chemical. If necessary, creep flattening can be employed as a heat treatment to relieve internal stresses and meet special flatness requirements.
About the chemical composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert specializing in both small and extensive titanium plate projects. As your go-to reference and long-term business partner, DAXUN is dedicated to supplying premium titanium plates alongside comprehensive technical assistance tailored to your needs. Envision DAXUN not just as an industrial supplier of pure titanium and titanium alloy plates, but as a strategic ally committed to overcoming any challenges you face, ensuring you achieve your project's aspirations with unmatched efficiency and expertise.
DAXUN's state-of-the-art service center in China maintains an extensive inventory of titanium plate products for expedited order processing. With capabilities in fundamental processing, precision water jet cutting, and advanced plate nesting, we deliver unparalleled added value to our customers, streamlining their operations and reducing both time and costs.
Through continual investment in cutting-edge production facilities and strategic capacity agreements with our partners, DAXUN guarantees its position at the pinnacle of titanium plate quality, both now and in the evolving future.
Reach out to DAXUN today for the most competitive titanium plate prices and the latest technical information, propelling your projects to new heights of success.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V - Grade 5 - TC4 UNS R56400 Alloy Titanium Plates from China! With our dedication to engineering the world's highest performance titanium alloy plates, we ensure rapid delivery across the globe. Our offerings include ASTM B265 Grade 2 and Grade 5 Titanium Plates, with Grade 5 (UNS R56400) available in thicknesses from 0.5mm to 300mm (0.5mm-6.0mm cold-rolled, 6.0-50mm hot-rolled, and 50mm+ forged). Known as the 'workhorse' of titanium alloys, Grade 5 titanium (Ti-6Al-4V) boasts exceptional strength, ductility, and superior resistance to corrosion and high temperatures, making it indispensable to both general and military industries. Compliance with numerous standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
The Ti-6Al-4V Grade 5 titanium plate serves pivotal roles in aerospace, military industries, power generation, vehicle armoring, precision rocket guidance systems, and marine applications.
Grade 1
Today, DAXUN Alloys stands as a preeminent global producer and supplier of top-quality Grade 1 titanium plates.
The Pure Grade 1 titanium plate excels in ductility and cold formability, ideal for deep drawing processes. Grade 1 titanium is renowned for its outstanding general and seawater corrosion resistance and its ability to withstand oxidizing, neutral, and mildly reducing environments, including chlorides. With its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and remarkable corrosion resistance, Grade 1 titanium is perfect for a plethora of demanding chemical conditions. Commercially pure Grade 1 titanium, being the softest and most ductile, also offers excellent cold formability, exceptional corrosion resistance, and superb weldability coupled with good impact hardness.
Producers of ASTM B265 Titanium Grade 1 Plates, Titanium Gr 1 Sheets, and Finished Plates. Suppliers of ASTM B265 Titanium Grade 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Cold Rolled Plates, ASTM B265 Gr 1 Sheets, Gr 1 Patterned Plates, Perforated Plates, and manufacturers of Titanium Grade 1 Sheets and Plates in China.
Grade 2
DAXUN supplies commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. The Grade 2 Titanium Plate (UNS R50400) is revered as the 'workhorse' of the commercially pure titanium family, merging high strength, superb ductility, and outstanding corrosion resistance for a myriad of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate that provides an excellent equilibrium between strength and ductility. It is known for its good impact strength, ease of welding, and excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it offers excellent resistance to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and exceptional corrosion resistance, titanium is an ideal material for diverse applications, resisting stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Grade 2 Titanium Plate, melting at 1660°C, remains the preferred alloy for industrial applications demanding high ductility and corrosion resistance.
DAXUN is your go-to metal expert for both small and large titanium plate projects. DAXUN stands as your reference point and long-term partner, committed to providing high-quality titanium plates and comprehensive technical support. Consider DAXUN not only as your supplier of industrial pure titanium and titanium alloy plates but also as your strategic partner, ready to help you navigate any challenges and fulfill your project goals with precision.
At DAXUN's premier service center in China, we maintain a robust inventory of titanium plate products, poised for swift and efficient order fulfillment. Leveraging advanced processing techniques such as water jet cutting and meticulous plate nesting, we deliver exceptional value to our customers, significantly reducing both time and cost expenditures.
With unwavering commitment, DAXUN continuously invests in cutting-edge production facilities and solidifies capacity agreements with our strategic partners. This relentless focus ensures that DAXUN remains at the pinnacle of titanium plate quality, both now and for the foreseeable future.
Reach out to DAXUN today for competitive pricing and comprehensive technical information on our state-of-the-art titanium plates. Don't miss out on the latest advancements and unparalleled quality that only DAXUN can provide.
Q1: What products can you offer?
A: We offer a comprehensive range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we provide 316L in the 300 series.
Our inventory also includes the 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, and more. We also specialize in high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products based on your drawings to ensure they meet your satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain stringent quality control standards from the initial stage to the final product.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can adjust the packaging and transportation to suit your needs,
but please note that any additional costs incurred will be your responsibility.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain stringent quality control standards from the initial stage to the final product.
Q6. How long is the delivery time?
A: Delivery time is between 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite the process to meet your deadlines.
Q7. What is your Payment?
A: 100% T/T advance, Western Union (for small orders).
B: 30% T/T in advance and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight (for large orders).
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, and bowls. Provide us with your specific requirements, and we will tailor the mechanical properties accordingly.
Q9: How to get a sample?
A: Free samples are available for your examination and testing. For small samples, we may cover the courier costs, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to countries such as Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}