| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN specializes in and maintains an extensive inventory of commercially pure titanium plates, including Gr1, Gr2, Gr3, and Gr4 (UNS), available in thicknesses ranging from 0.5 mm to 120 mm. These grades are the backbone of the commercially pure titanium family, offering an impeccable blend of high strength, ductility, and outstanding corrosion resistance, making them suitable for a myriad of industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates are known for their commercial purity. They strike a perfect balance between strength and ductility, boasting excellent impact strength and weldability. These plates exhibit superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Their exceptional resilience against seawater and salt solutions further underscores their robustness.
Gr5 (Grade 5) Ti-6Al-4V titanium alloy plate stands as a paragon of titanium alloy plates. Comprising 90% titanium, 6% aluminum, and 4% vanadium, it is an α-β type titanium alloy where aluminum stabilizes the α phase and vanadium stabilizes the β phase. Gr5 Ti-6Al-4V titanium alloy plate is renowned for its exceptional comprehensive performance and processability. The TC4 titanium alloy showcases phenomenal room and high-temperature strength, excellent creep resistance, and thermal stability. Moreover, it excels in fatigue performance and *** growth resistance in seawater, along with satisfactory fracture toughness and hot salt stress corrosion performance. Its superior process plasticity and superplasticity make it apt for various processing, welding, and machining methods.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: This exceptional plate is meticulously produced through a plate rolling process, where the final rolling step is conducted under cold conditions. These sheets are available in either a work-hardened or heat-treated state, tailored to meet your specific requirements. Further processing can be customized to your needs, whether it's mechanical or chemical. 2. Hot-Rolled Titanium Plate: Crafted through both longitudinal rolling and a combination of longitudinal and transverse rolling, these plates boast a thickness range from 3.0mm to 155mm and are supplied in a heat-treated condition. To ensure precision, optional creep flattening can be employed as part of the heat treatment to eliminate internal stress and achieve special flatness. Available as cut blanks or complex shaped parts, these plates can be further processed according to your exact specifications.3. Forged Titanium Plate: Produced through advanced methods such as forging steel ingots on a vertical hydraulic press, open die forging, or a combination of both before rolling. Standard dimensions include a thickness of up to 580 mm, a width of up to 2000 mm, and a length of up to 6000 mm. The specifications and weight of these forged plates are customized through a collaborative agreement between Daxun and the customer, ensuring a perfect fit for your needs.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti-6Al-4V Grade 5 TC4 UNS R56400 alloy titanium plates from China. Our mission is to create world-class high-performance titanium alloy plates and ensure fast global delivery. We produce and stock ASTM B265 Grade 2 and Grade 5 titanium plates in thicknesses ranging from 0.5mm to 300mm. Our Grade 5 titanium plates (UNS R56400) are available in cold rolled (0.5mm-6.0mm), hot rolled (6.0-50mm), and forged (50mm and above) options. Renowned for their high strength, ductility, and exceptional corrosion and high-temperature resistance, Grade 5 titanium plates are the 'workhorse' of titanium alloys, ideal for both general and military applications. Our products comply with standards like ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
The Ti-6Al-4V Grade 5 titanium plate is extensively used in aerospace, military, power, vehicle armor, rocket precision guidance, and marine industries, showcasing its versatility and reliability.
Grade 1
Today, DAXUN Alloys stands out as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts excellent ductility and cold formability, making it perfect for deep drawing applications. Known for its outstanding resistance to general corrosion, seawater, oxidizing, neutral, and mildly reducing media (including chlorides), it is an ideal choice for challenging chemical environments. With low density (around half that of nickel-based alloys), high strength-to-weight ratio, and superior corrosion resistance, Grade 1 titanium is the softest and most ductile of commercially pure titanium grades. It also features excellent weldability and good impact hardness.
We are your go-to source for ASTM B265 Titanium Gr 1 plates. Our offerings include Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. As leading manufacturers in China, we ensure unmatched quality and reliability.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate is renowned as the 'workhorse' of the commercially pure titanium family, offering an excellent balance of strength, ductility, and corrosion resistance for various industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium plate, achieves an ideal strength-to-ductility balance and features good weldability and impact strength. It exhibits excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It is also resistant to seawater and salt solutions, making it suitable for diverse industrial uses.
With its low density, high strength-to-weight ratio, and excellent corrosion resistance, titanium is perfect for numerous applications. It resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Grade 2 Titanium Plate, with a melting point of 1660°C, is the preferred alloy for most industrial applications requiring superior ductility and corrosion resistance.
DAXUN is your expert partner for both small and large titanium plate projects. As a reference point and long-term ally, we are committed to providing you with high-quality titanium plates and technical assistance. Consider DAXUN not only as your supplier of industrial pure titanium and alloy plates but also as a strategic partner to help you overcome any challenges and meet your project goals efficiently.
DAXUN's premier service center in China boasts an extensive inventory of titanium plate products, ensuring swift order processing. With our advanced basic processing capabilities, precise water jet cutting, and efficient plate nesting, we deliver unparalleled value to our esteemed customers, significantly reducing both time and costs.
Through relentless investment in our cutting-edge production facilities and strategic capacity agreements with our partners, DAXUN consistently leads the industry in titanium plate quality, setting the standard for excellence now and into the future.
Reach out to DAXUN today to access the most competitive prices and comprehensive technical information on our superior titanium plates.
Q1: What products can you offer?
A: At Jiangsu Daxun Alloy Co., Ltd., we offer a comprehensive range of premium steel products including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, 300 series, and more.
Additionally, we specialize in 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, along with high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can tailor our products to your specific drawings, ensuring the highest level of satisfaction.
Q3. How does your factory handle quality control?
Quality is our top priority. We meticulously manage quality control from the initial stages to the final product.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can modify the packaging and transportation methods to meet your requests.
However, please note that you will be responsible for any additional costs and variations incurred during this period.
Q5. How does your factory manage quality control?
Quality is paramount to us. We consistently prioritize quality control from start to finish.
Q6. How long is the delivery time?
A: Typically, delivery takes 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite the process to complete it ahead of schedule.
Q7. What are your payment terms?
A: 100% T/T in advance, Western Union for small orders.
B: 30% T/T upfront and 70% balance before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you produce DDQ (Deep Drawing Quality) products?
A: Yes, we specialize in DDQ materials suitable for stainless steel pots, sinks, bowls, and more. Share your requirements with us, and we will adjust the mechanical properties to meet your needs.
Q9: How can I get a sample?
A: We offer FREE samples for your evaluation and testing. If a small piece is required, we may cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many other countries.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}