Basic Info.
Model NO.
17-4 PH stainless steel rod
Type
Stainless Steel Bars
Standard
ASTM, AISI, GB, JIS, DIN, EN
Certification
ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
Manufacturing
Hot Rolling, Cold Rolling, Forging
Trademark
TISCO POSCO Baosteel
Transport Package
Wooden Box or Wooden Pallet
Specification
φ 3.0mm-350mm
Product Description
| Product Parameters: Stainless Steel rod |
| Material | 17-4PH 630 Precipitation Hardened Steel Bars |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. |
| Under Third Party Inspection |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Global Leader in Stainless Rod and Round Bar Fabrication Services
Daxun is a premier global manufacturer of SS 17-4PH/630 Round Bar/Rod. As a trusted supplier, exporter, and distributor, we deliver high-quality bars and rods that meet the industry's demanding standards.
We offer an extensive range of bars and rods, customizable by various parameters including surface treatment, end finish, dimensions, shapes, and sizes to meet diverse customer needs.
SS 17-4PH is a martensitic stainless steel that achieves its hardness through a precipitation hardening process. This alloy, enriched with nickel, copper, and chromium, is predominantly employed in the aerospace industry for fasteners and structural components. The UNS S17400 microstructure, refined during the remelting process, significantly enhances the alloy's toughness.
Stainless steel 17-4 PH Round Bar is highly sought after in manufacturing and engineering due to its superior corrosion resistance, high strength, and production ease. The 'PH' signifies precipitation hardening, a heat treatment process that optimizes the material's mechanical properties.
Hot Rolled Stainless Steel Rod
Our stainless steel rods and bars undergo multiple heating and rolling passes in a mill, ensuring comprehensive specifications and performance that meet industry standards.
Cold Drawn Bright Stainless Steel Rods
Cold-drawn stainless steel rods are crafted under cold working conditions, resulting in a smooth surface that can be further polished and ground to perfection.
Forged Stainless Steel Rod and Bar
Forged stainless steel rods undergo repeated forging to enhance their mechanical properties and achieve higher strength levels.
General Properties
Our extensive service network stocks a wide range of stainless steel bar products for quick supply of standard sizes and alloys. For bespoke sizes, we offer custom production. If quantities fall below the factory minimum, we can implement a stocking program for fast turnaround. Daxun Alloys stocks round bars from 1/16" to 26" in diameter, available in almost every grade of stainless steel, including 302, 303, 304/L, 309/S, 310/S, 316/L, 317/L, 321, 321/H, 347, 347H, 410, 416, 420, 440C, 17-4PH, Duplex 2205, and Alloy 20.
Additional Services
Our unique processed bar grade, stainless steel round bars, are melted to exacting standards to improve machinability, reducing the overall cost per part. Our advanced bar processing machinery allows Daxun Alloys to deliver products tailored to precise customer specifications.
1. Heat Treatments: Daxun offers heat treatments based on the metal's chemistry. 2. Positive Material Identification (PMI): We can conduct PMI testing in-house or collaborate with independent labs to ensure material integrity. 3. Ultrasonic Testing (UT): Utilizing high-frequency sound energy, UT helps detect defects, evaluate dimensions, and ensure the quality of stainless steel bar products.
For more information on our stainless steel rods, please contact Daxun.
17-4PH Stainless Steel Rod Chemical Composition
| Carbon | 0.07% (Max) |
| Silicon | 1.00% (Max) |
| Manganese | 1.00% (Max) |
| Phosphorous | 0.040% (Max) |
| Sulfur | 0.030% (Max) |
| Chromium | 15%-17.5% |
| Molybdenum | 0.50% (Max) |
| Nickel | 3%-5% |
| Copper | 3%-5% |
17-4PH Stainless Steel Rod Mechanical Properties
| Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
| 17-4 PH | H900 | 190,000 | 170,000 | 10 | 40 | 388 | C40 |
| | H1025 | 155,000 | 145,000 | 12 | 45 | 331 | C35 |
| | H1075 | 145,000 | 125,000 | 13 | 45 | 311 | C32 |
| | H1150 | 135,000 | 105,000 | 16 | 50 | 277 | C28 |
| | H1150-M | 115,000 | 75,000 | 18 | 55 | 255 | C24 |
| | H1150-D | 125,000 | 105,000 | 16 | 50 | 255 min - 311 max | C24 - 33 |
17-4PH Stainless Steel Rod Physical Properties
| Heat Treated Condition | H900 |
| Density, lbs/in3 | 0.282 |
| Electrical Resistivity, microhm-cm | 77 |
| Specific Heat, BTU/lb/°F (32-212°F) | 0.1 |
| Thermal Conductivity, BTU/hr/ft2/in/°F | |
| 300°F | 124 |
| 500°F | 135 |
| 860°F | 156 |
| 900°F | 157 |
| Mean Coefficient of Thermal Expansion, in/in/°F | |
| -100 to 70°F | 5.8 x 10^-6 |
| 70 - 200°F | 6.0 x 10^-6 |
| 70 - 400°F | 6.0 x 10^-6 |
| 70 - 600°F | 6.3 x 10^-6 |
| 70 - 800°F | 6.5 x 10^-6 |
| 70 - 900°F | - |
| Modulus of Elasticity, ksi | 28.5 x 10^3 |
| Modulus of Rigidity, ksi | 11.2 x 10^3 |
| Poisson's Ratio (all conditions) | 0.272 |
Daxun's Stainless Steel Rods Manufacturing Capabilities
Our forming capabilities include state-of-the-art radial forging machines, heat treatment furnaces, melting furnaces, and rolling mills for titanium rod production, complemented by a unique hydroforming process for manufacturing intricate parts.
Daxun's Advanced Heat Treatment Furnace
Our stainless steel rod heat treatment leverages state-of-the-art furnace equipment to guarantee not only the stability but also the superior performance of the material, ensuring it meets the highest standards.
Unparalleled Smelting Capabilities of Daxun
At Daxun Stainless Steel, we employ the world's most cutting-edge vacuum induction furnace, vacuum consumable furnace, and electroslag furnace. These advanced technologies drastically reduce impurities during the smelting process, significantly enhancing the performance of our finished stainless steel rods.
Entrust Your Needs to a Reliable Partner in Stainless Steel: Jiangsu Daxun Alloy Co., Ltd.
Our stainless steel products are fully certified and traceable. We supply the highest quality stainless steel to leading industries including aerospace, industrial, medical, marine, and military.
Exceptional Mechanical Properties Across Various Grades of Stainless Steel Bars
| | Tensile Strength | Yield Strength | | | | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. |
| Grade | Tensile Str | Yield Str | Elong | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell B (HR B) max | Brinell (HB) max |
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| | Tensile Strength | Yield Strength | | | |
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness |
| (MPa) min | 0.2% Proof | (% in 50mm) min |
| | (MPa) min | | Rockwell C (HR C) | Brinell (HB) |
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
2507/
S32750 | Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi |
| Ultimate Tensile Strength | 116 ksi |
| 0.1% Offset Yield Strength 0.2% | 91 ksi |
| Elongation in 2 inches, % | 15% |
| Hardness Rockwell C | 32 |
| Impact Energy | 74 ft.-lbs |
| Density | 0.28 lb per inch3 |
| Modulus of elasticity | 28 x 10(6) psi |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of |
| Thermal conductivity | 8.7 Btu/hr ftoF |
| Heat capacity | 0.12 Btu/ lb oF |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
For further details on our premium stainless steel rods, please reach out to Jiangsu Daxun Alloy Co., Ltd.
CORROSION RESISTANCE:
- 17-4 pH Stainless Steel Round Rod Cold Rolled for Aviation excels against corrosive attacks, surpassing standard hardenable stainless steels.
- Its corrosion resistance is comparable to Alloy 304 in most environments.
- Ideal for use in chemical, petroleum, dairy, and food processing industries, due to its exceptional corrosion resistance.
- However, prolonged exposure to stagnant sea water can lead to crevice or pitting corrosion.
WELDABILITY:
- 17-4 pH Stainless Steel can be successfully welded using most common fusion and resistance techniques.
- Avoid using oxyacetylene welding for this material.
- Typically, there is no need for pre-heating before welding.
- Maintain an inter-pass temperature below 248°F for optimal results.
- Achieve better toughness in welds through a complete heat treatment process.
ELEVATED TEMPERATURE USE:
- Offers excellent oxidation resistance up to approximately 1100°F.
- Note: Long-term exposure to high temperatures may reduce toughness in precipitation-hardened conditions.
PROCESSING - HOT FORMING:
- For forging, heat uniformly to 2150-2200°F and hold for half an hour per inch of thickness.
- The preferred hot forming temperature range is 650-900°F, while the steel remains austenitic.
- To optimize hardening operations, re-heat treat forgings at 1875-1925°F.
- Cool forgings below 90°F to ensure grain refinement.
PROCESSING - COLD FORMING:
- Alloy 17-4 is suitable for mild cold forming operations due to its hardness in the annealed (solution treated) condition.
- For severe cold working, heat treat the material to condition H1150 to prevent possible cracking.
- A bend radius exceeding 7T is often required.
- Re-aging at the precipitation-hardening temperature is recommended to improve stress corrosion resistance after cold forming.
MACHINABILITY:
- 17-4 pH Stainless Steel can be machined in both solution-treated and precipitation-hardened states.
Mechanical Properties
- Type 17-4PH stainless steel boasts exceptional mechanical properties, making it ideal for applications demanding high strength, hardness, and corrosion resistance. It is a more cost-effective alternative to many high-nickel non-ferrous alloys.
17-4ph/630 grade stainless steel round bars
Our 17-4ph Stainless steel round bars serve a variety of applications, from construction to automotive parts. At Jiangsu Daxun Alloy Co., Ltd., we offer these bars in multiple grades and sizes. With our advanced cutting service, we ensure your precise requirements are met every time.
Can you do SS grinding bar & rod?
Yes, we can manufacture SS grinding bars & rods with precision in dimension, roundness, and straightness. These are superior to standard stainless steel polished bars; however, the processing cost is higher.
Q1: What products can you offer?
A: We specialize in a variety of steel types, including general steel like 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300, and
400 series. Additionally, we provide duplex stainless steel such as 2205, 2304, 2101, 2507, etc., and high-nickel alloys like 904L, 800H, and 600H.
Q2: Can you produce the products according to my own drawings?
Yes, we can customize products based on your drawings to ensure complete satisfaction.
Q3: How does your factory handle quality control?
Quality is our top priority. We rigorously control quality from the initial stages to the final product.
Q4: Can I request to change the form of packaging and transportation?
Yes, we can adjust the packaging and transportation according to your specifications;
however, any additional costs and differences incurred will be borne by you.
Q5: How does your factory handle quality control?
Quality is our top priority. We rigorously control quality from the initial stages to the final product.
Q6: What is the delivery time?
A: The delivery time is typically 7 to 20 working days after payment confirmation.
For urgent orders, we expedite the process to complete it as soon as possible.
Q7: What are your payment options?
A: 100% T/T in advance or Western Union for small orders,
B: 30% T/T upfront and the remaining 70% before shipment,
C: 100% Irrevocable LC at sight for large orders.
Q8: Do you provide DDQ (Deep Drawing Quality)?
A: Yes, we do. Our materials are suitable for making stainless steel pots, sinks, bowls, etc. Let us know your specific use, and we will adjust the mechanical properties to meet your needs.
Q9: How can I get a sample?
A: FREE samples are available for your inspection and testing. If you need a small piece, we may cover the courier cost depending on the circumstances.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Address:
B108, No. 32-1, Chengnan Road, Xinwu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, HQE, IFS
Company Introduction:
Founded in 2003, Daxun Alloy is a leading global metal material manufacturer. Headquartered in Wuxi, China, the company has multiple production bases and sales offices around the world. Daxun Alloy focuses on the development, production and sales of various stainless steels, titanium alloys, high-temperature alloys, etc. For general industry, construction, aerospace, energy, chemical industry, medical and other fields.
China, Daxun Metal Group is a global vertically integrated metal material manufacturer and stockist. Daxun can provide finished products and customized full-process services and professional technical services. Currently, the group has 600 employees and covers a total area of 130, 000 square meters. Daxun has a standing inventory of 50, 000 tons of stainless steel, 5, 000 tons of nickel-based alloys, and 2, 000 tons of pure titanium and titanium alloys. The main product forms are metal plates, metal coils, metal pipes, and metal bars. The metal materials produced by Daxun are market leaders for marine, energy, military, general industrial and aerospace applications. In addition, the company also produces seamless pipes, plates, forgings and other metal materials for power generation and oil and gas applications; Commercial and military alloy products; And metal alloys and other metal products for the forging industry.
