| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! With the goal of creating the world's high-performance titanium alloy plates. We deliver quickly worldwide - ASTM B265 Grade 2, Grade 5 Titanium Plates. DAXUN produces and stocks alloy titanium plates Grade 5 (UNS R56400) with thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm is cold rolled. 6.0-50mm is hot rolled, and 50mm and above are forged). Grade 5 titanium plate (Ti-6Al-4V) is the "workhorse" of titanium alloy materials. It combines high strength, ductility and excellent corrosion resistance, high temperature resistance, thus being favored by many general and military industries. Compliant with: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Ti-6Al-4V grade 5 titanium plate contains 90% titanium, 6% aluminum and 4% vanadium. It is an α-β titanium alloy in which aluminum stabilizes the α phase and vanadium stabilizes the β phase. The main features of Ti-6Al-4V titanium alloy plate are excellent comprehensive performance and good process performance. TC4 titanium alloy has excellent room temperature and high temperature strength, good creep resistance and thermal stability, high fatigue performance and *** growth resistance in seawater, as well as satisfactory fracture toughness and hot salt stress corrosion performance. Ti-6Al-4V titanium plate also has excellent process plasticity and superplasticity, suitable for various processing methods, and various ways of welding and machining.
Ti-6Al-4V grade 5 titanium plate is mainly used in aerospace, military industry, power industry, vehicle armor, rocket precision guidance parts, marine industry, etc.
Grade 5 titanium alloy plate is the most commercially available of all titanium alloys. It combines high strength and toughness. Ti-6Al-4V Grade 5 titanium alloy has good comprehensive properties:
Ti-6AL-4V titanium plates and sheets are mainly used for parts that require corrosion resistance, stress corrosion resistance and high strength (400-450°C), with good ductility and lateral strength. 1. Jet engine compressor blades, disks and rings, fuselage components such as wings, fuselages, turbine disks, doors, bulkheads, military aircraft and hardware heat shields, engine nozzles, landing gear doors, fuselage superplastic forming parts, etc. 2. Military applications include: armor, guidance, shell casings, etc. 3. Spacecraft components, including ***s and heat shields, etc. 4. Medical and surgical instruments. 5. Sports equipment, including bicycle frames and golf clubs. 6. Other uses that require a high strength-to-weight ratio.
Daxun conducts multiple quality assurance tests, these tests include flattening test, pitting and resistance test, mechanical test, hardness test, material positive identification, expansion test, etc. All these tests ensure that the material is suitable for the required application. During the production process, we measure the diameter, thickness and surface of the product. Our standard delivery time is 5-7 days, and the delivery time for special size products is 15-20 days.
Discover the intricate details of the chemical composition of our premium Grade 5 Titanium Sheet (Ti 6AL-4V).
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Unveil the secrets of the chemical composition of Grade 2 Titanium Sheet.Sheet, designed to deliver reliability and excellence in every application.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Gain insights into the mechanical properties of our Grade 2 Titanium Sheet. Sheet, engineered to provide superior performance and durability.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert, specializing in both small and large-scale titanium plate projects. As your trusted reference point and long-term ally, DAXUN is committed to delivering top-tier titanium plates alongside comprehensive technical support tailored to your specific needs. Think of DAXUN not merely as a supplier of industrial pure and alloy titanium plates but as a strategic partner dedicated to overcoming any challenges and fulfilling your requirements, thereby ensuring the successful realization of your project goals.
DAXUN's advanced service center in China boasts an extensive inventory of titanium plate products, enabling rapid order processing. With services like basic processing, precision water jet cutting, and efficient plate nesting, we provide exceptional value, significantly reducing both time and costs for our esteemed customers.
Our unwavering commitment to continuous investment in production facilities, coupled with strategic capacity agreements with our partners, ensures that DAXUN remains at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and acquire detailed technical information.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a renowned manufacturer and supplier from China, specializing in Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates. Our mission is to produce the world's highest-performance titanium alloy plates. We offer swift global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks and produces Grade 5 (UNS R56400) alloy titanium plates with thicknesses ranging from 0.5mm to 300mm. Cold-rolled plates range from 0.5mm-6.0mm, hot-rolled plates from 6.0mm-50mm, and forged plates from 50mm and above. Grade 5 titanium plate (Ti-6Al-4V) is the industry standard, known for its high strength, ductility, excellent corrosion resistance, and high-temperature tolerance, making it indispensable in both general and military industries. Our products comply with leading standards: ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military applications, power generation, vehicle armor, precision rocket guidance systems, and the marine industry.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of high-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it perfect for deep drawing applications. Renowned for its outstanding general and seawater corrosion resistance, Grade 1 titanium also excels in resisting oxidizing, neutral, and mildly reducing media, including chlorides. With its low density, approximately half that of nickel-based alloys, and an impressive strength-to-weight ratio, titanium is ideal for numerous harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile variant, offering excellent cold formability, superior corrosion resistance, weldability, and impact hardness.
As a leading producer, DAXUN offers ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, and Finished Plates. We supply Titanium Gr 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. We are a trusted source for Titanium Grade 1 Sheets and Plates in China.
Grade 2
DAXUN produces and maintains an extensive stock of commercially pure titanium plates Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the cornerstone of the commercially pure titanium category, offering an exceptional balance of strength, ductility, and corrosion resistance, suitable for various industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering an optimal blend of strength and ductility. It features remarkable impact strength and weldability. This titanium plate excels in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also provides excellent resistance to seawater and salt solutions.
With its low density, superior strength-to-weight ratio, and robust corrosion resistance, titanium is an ideal material for diverse applications. Grade 2 Titanium Plate effectively counters stress corrosion cracking, pitting, and crevice corrosion in chloride solutions up to 70°C. Boasting a melting point of 1660°C, this alloy is the preferred choice for demanding industrial applications requiring excellent ductility and corrosion resistance.
DAXUN is your go-to titanium metal expert, adept at handling both small and large titanium plate projects. As your reliable reference point and long-term partner, we are committed to providing top-quality titanium plates and comprehensive technical support. Consider DAXUN not just a supplier but a strategic partner dedicated to helping you overcome challenges and achieve your project goals.
At Jiangsu Daxun Alloy Co., Ltd., our dedicated service center in China boasts an impressive inventory of titanium plate products for swift order fulfillment. Through our comprehensive range of basic processing techniques, state-of-the-art water jet cutting, and efficient plate nesting services, we create substantial value for our clients by significantly reducing their time and costs.
By persistently investing in cutting-edge production facilities and fostering robust capacity agreements with our esteemed partners, Jiangsu Daxun Alloy Co., Ltd. guarantees that we remain at the pinnacle of titanium plate quality, both now and in the foreseeable future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today to access the most competitive titanium plate prices and obtain detailed technical information tailored to your needs.
){kind=link}