| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates, proudly based in China! We are committed to creating high-performance titanium alloy plates for global markets. We offer swift worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we manufacture and stock Grade 5 (UNS R56400) titanium plates with thicknesses ranging from 0.5mm to 300mm. Our production methods include cold rolling for thicknesses from 0.5mm-6.0mm, hot rolling for 6.0-50mm, and forging for 50mm and above. Grade 5 titanium plate (Ti-6Al-4V) is the 'workhorse' among titanium alloys, known for its exceptional strength, ductility, and outstanding corrosion and high-temperature resistance, making it highly sought after in both general and military industries. Our products comply with a wide range of standards including ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate comprises 90% titanium, 6% aluminum, and 4% vanadium. This α-β titanium alloy benefits from aluminum stabilizing the α phase and vanadium stabilizing the β phase. The key attributes of Ti-6Al-4V titanium alloy plate include excellent comprehensive performance and processability. TC4 titanium alloy offers remarkable strength at room and high temperatures, good creep resistance, thermal stability, high fatigue performance, and *** growth resistance in seawater. It also provides satisfactory fracture toughness and hot salt stress corrosion performance. Additionally, Ti-6Al-4V titanium plates exhibit excellent process plasticity and superplasticity, making them suitable for various processing methods, as well as diverse welding and machining techniques.
Ti-6Al-4V Grade 5 titanium plates are predominantly utilized in aerospace, military, power, vehicle armor, rocket precision guidance parts, and marine industries.
Grade 5 titanium alloy plates are the most commercially available among titanium alloys, boasting a combination of high strength and toughness. Ti-6Al-4V Grade 5 titanium alloy offers the following benefits:
Ti-6AL-4V titanium plates and sheets are ideal for parts requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), with excellent ductility and lateral strength. Typical applications include: 1. Jet engine components such as compressor blades, disks, rings, and fuselage parts like wings, fuselages, turbine disks, doors, bulkheads, military aircraft hardware, heat shields, engine nozzles, landing gear doors, and superplastic forming parts. 2. Military uses include armor, guidance, and shell casings. 3. Spacecraft components, including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment, such as bicycle frames and golf clubs. 6. Other applications requiring a high strength-to-weight ratio.
At Daxun, we conduct multiple quality assurance tests, such as flattening tests, pitting and resistance tests, mechanical tests, hardness tests, positive material identification, and expansion tests. These rigorous tests ensure that our materials meet the required specifications. During production, we meticulously measure the diameter, thickness, and surface of our products. Our standard delivery time is 5-7 days, while special size products are delivered within 15-20 days.
Detailed insights into the chemical composition of the superior Ti 6AL-4V Grade 5 titanium sheet.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
An in-depth look at the chemical composition of Grade 2 titaniumsheet.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Thorough evaluation of the robust mechanical properties of Grade 2 titanium sheet.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is your premier metal expert, specializing in both small and large-scale titanium plate projects. As your go-to reference point and long-term partner, DAXUN is dedicated to providing you with top-quality titanium plates and unparalleled technical support. Consider DAXUN not merely as a supplier of industrial pure titanium and titanium alloy plates, but as a strategic ally committed to helping you overcome challenges and meet your needs, ensuring the success of your project goals.
DAXUN's service center in China boasts a comprehensive stock of titanium plate products, ready for swift order processing. We enhance customer value through meticulous processing, precision water jet cutting, and efficient plate nesting services, saving you both time and costs.
Through continuous investment in our production facilities and strategic capacity agreements with partners, DAXUN ensures that we remain at the cutting edge of titanium plate quality, both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and up-to-date technical information.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! We are committed to delivering the world's highest-performance titanium alloy plates with rapid global delivery. Our ASTM B265 Grade 2 and Grade 5 Titanium Plates are readily available. DAXUN maintains a robust inventory of Grade 5 (UNS R56400) titanium plates in various thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm is cold rolled, 6.0-50mm is hot rolled, and 50mm and above are forged). Grade 5 titanium plate (Ti-6Al-4V) is renowned as the workhorse of titanium alloys, combining high strength, ductility, exceptional corrosion and high-temperature resistance. This makes it a preferred choice across numerous general and military industries. Compliance standards include: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, among others.
Ti-6Al-4V Grade 5 titanium plates are primarily utilized in aerospace, military, power industries, vehicle armor, precision-guided rocket parts, marine industry, and more.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plates exhibit exceptional ductility and cold formability, making them ideal for deep drawing applications. Known for their excellent general and seawater corrosion resistance, Grade 1 titanium also resists oxidizing, neutral, and mildly reducing media, including chlorides. With its low density (about half that of nickel-based alloys), high strength-to-weight ratio, and impressive corrosion resistance, titanium is a superior choice for a range of harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile variant, offering good cold formability, excellent corrosion resistance, and outstanding weldability and impact hardness.
As producers of ASTM B265 Titanium Grade 1 Plates, we offer a diverse array of products including Titanium Gr 1 Sheets, Finished Plates, Grade 1 Coils, and more. Our portfolio includes hot rolled, cold rolled, patterned, and perforated Grade 1 titanium plates, making us a leading manufacturer in China.
Grade 2
DAXUN supplies a comprehensive range of commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate, often considered the workhorse of commercially pure titanium, balances high strength with ductility and boasts excellent corrosion resistance, suitable for numerous industrial applications.
Grade 2 Titanium Plates are recognized for their commercial purity and excellent balance of strength and ductility. They offer good impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, they provide superior resistance to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and remarkable corrosion resistance, titanium is an ideal material for various applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Grade 2 Titanium Plates, with a melting point of 1660°C, are the preferred alloy for industrial applications requiring exceptional ductility and corrosion resistance.
DAXUN is your expert in metal, specializing in both small and large titanium plate projects. Serving as your reference point and long-term partner, we are dedicated to providing titanium plates and comprehensive technical support to you and your business. More than just a supplier, DAXUN is your strategic ally in overcoming challenges and achieving your project goals.
At DAXUN's premier service center in China, we maintain an extensive stock of titanium plate products, ready for rapid order fulfillment. Our advanced processing capabilities, including water jet cutting and plate nesting, add significant value for our customers by saving precious time and reducing costs.
DAXUN remains a leader in titanium plate quality due to our continuous investment in cutting-edge production facilities and strategic capacity agreements with our esteemed partners. This commitment ensures that our products meet the highest standards now and will continue to do so in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical information available in the market.
){kind=link}