Advanced Titanium Tube Gr5 Astmb861 Seamless Ti6al4V for Defense and Aerospace Applications

• Type: Titanium Pipes
• Application: Industrial, Medical
• Technique: Hot Rolled
• Grade: Gr5 Grade5 6-4 Ti6al4V
• Shape: Round
• Standards: Astmb861 B862 B338 ASME Sb861 Sb862 Sb338
• Titanium Plate Grade: Grade 5 Uns R50600
• Transport Package: Wooden Box
• Specification: φ 6.35mm-φ 1219mm
• Trademark: Daxun
• Origin: China
• Production Capacity: 1000ton

Product Description

Product Parameters

 

Ti-6Al-4V Grade 5 Titanium pipe & Tubes Specification	ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862
Grade 5 Titanium pipe & Tubes Grades	Commercially pure titanium Grade 5-Ti-6Al4V- TC4- USN 56400
Grade 5 Titanium pipe & Tubes Type	ot Rolled / Cold Drawn / Welded / ERW
Grade 5 Titanium pipe & Tubes Outer Diameter Size	Titanium seamless pipe - φ1.0mm to φ508.3mm
	Titanium welded pipe - φ6.0mm to φ1219mm
Grade 5 Titanium pipe & Tubes Wall Thickness	1.0mm-50mm (customizable wall thickness)
Grade 5 Titanium pipe & Tubes Length	5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size.
Titanium pipe Form Ti-6Al-4V	' Hollow, U' bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc
Marking  TC4 1.37165	All Titanium Tubes Tubing are marked as follows: Grade, Standard, Thickness, OD, Heat No., Length (Or according to the customer's request.)
Uses of Titanium Alloy Tubes	Gas pipes, oil pipes, heat exchanger tubes, boiler tubes, fluid pipes, titanium exhaust pipes.
Grade 5 Titanium pipe & Tubes Pipe Ends	Plain Ends / Beveled Ends
Grade 5 Titanium pipe & Tubes Delivery Conditions	As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered
Grade 5 Titanium pipe & Tubes Coating	Electropolish, Mechanical Polish, Satin Finish, Passivated
Grade 5 Titanium pipe & Tubes Other Testing	ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc.
Grade 5 Titanium pipe & Tubes Dimension	All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME
Grade 5 Titanium pipe & Tubes Value Added Services	Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment
Grade 5 Titanium pipe & Tubes Packaging	Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
Grade 5 Titanium pipe & Tubes Shipment & Transportation	By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Grade 5 Titanium pipe & Tubes Material Test Certificate	Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

 

Detailed Photos

Applications and standards

Grade 5 titanium tubes are extensively utilized across several industries, especially under harsh and corrosive conditions:

• Chemical processing parts, military industry, aerospace, chemical energy, marine engineering, oil and gas industry, rockets and missiles, military armor, ships and vessels, industrial machinery, power industry, paper and pulp industry, pharmaceutical and food processing equipment, etc.
• Specifications: ASTM B861, B862, B338 / ASME SB861, SB862, SB338
• Standards: ASTM, GB, GJB, ASME, and API

 

Quality, delivery, inspection

At Daxun, numerous rigorous quality assurance tests are conducted. These include flattening tests, flaring tests, ultrasonic flaw detection, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, expansion tests, and more. These comprehensive tests ensure that our Grade 1 Titanium Welded and Seamless Pipes are perfectly suited for their intended applications. During production, we meticulously measure the diameter, thickness, and surface quality of our products. Our standard delivery timeframe is 5-7 days, while special size products are delivered within 15-20 days.

• Our delivery schedule strictly adheres to the contract terms.
• We support third-party agency inspections at our factory upon customer request.
• We offer free samples for customer testing.
• We support on-site or video factory inspections.

 

Grade 5 Titanium Tube Features

Ti-6Al4V Grade 5 Titanium Alloy Tube stands as the most commercially viable titanium alloy available. It merges high strength with toughness and offers excellent welding and processing characteristics:

• High Strength Titanium Alloy
• Heat Treatable
• Good Ductility
• Good Machinability
• Good Weldability

We stock and sell a variety of Grade 5 Titanium Alloy Tubes, including Seamless Tubes, Forged Seamless Tubes, and Welded Tubes.

 

As a leading manufacturer and supplier of titanium alloy tubes, Daxun Alloy provides top-quality Grade 5 titanium pipes globally, earning acclaim from numerous projects.

Ti 6Al-4V (Grade 5 Titanium) is the most extensively used titanium alloy, representing over 50% of total titanium usage. Typically utilized in the annealed state, it can operate at temperatures up to 400°C (750°F). Ti 6Al/4V is weldable with matching or ELI filler wire. Compared to commercial pure titanium tubes, Ti 6Al/4V offers significantly higher strength and enhanced stiffness and thermal properties (excluding thermal conductivity). Its thermal conductivity is approximately 60% lower than CP titanium. Benefits of Grade 5 titanium seamless tubes include excellent formability, low density, and superior corrosion resistance. Additionally, they can be heat-treated to achieve optimal strength and performance.

This Grade 5 titanium alloy seamlessly merges unparalleled strength, exceptional corrosion resistance, superior weldability, and excellent machinability. Consequently, it finds extensive applications in diverse high-stakes environments such as military aircraft, the aviation industry, rocket components, precision-guided systems, armor parts, naval equipment, and military vacuum apparatus. Notably, the closely related 6-4 ELI variant is a preferred choice for surgical implants. Operating efficiently at temperatures up to 400°C, this alloy enhances ductility and toughness under cold working conditions, while offering outstanding specific strength. Typically supplied in an annealed condition, it can be easily heat-treated to elevate strength for various applications. Renowned as a versatile titanium alloy, Ti 6Al-4V seamless tubes boast a spectrum of ideal properties across a temperature range of -210°C to 400°C. Grade 5 titanium alloy tubes stand out as the most commercialized of all titanium alloys, seamlessly blending high strength with remarkable toughness. These tubes also possess excellent welding and processing attributes.

Titanium Alloy Grade 5 Seamless Pipe, Titanium Gr 5 High Pressure Pipe, ASTM B338 Titanium Alloy Gr 5 Seamless Pipe, Titanium Gr 5 Thick Wall Pipe. Premier supplier of Titanium Grade 5 ERW Pipe in China. Titanium Alloy Gr 5 Pipe, Titanium Gr 5 Electropolished Pipe, Anti-corrosion Titanium Pipe, Titanium Tube, ASTM B338 Titanium Grade 5 Welded Pipe, ASTM B861 / ASME SB861 Titanium Grade 5 Seamless Pipe. Leading manufacturer of Titanium Gr-5 Seamless Pipe in China. Ti-6al-4v Pipe Dealer, ASTM B338 Titanium Grade 5 Pipe, Titanium Gr 5 Bright Annealed Pipe, Ti-6al-4v Pipe, Gr 5 Pipe, Titanium Gr 5 Pipe, Titanium WERKSTOFF NR 3.7165 Pipe

Packaging & Shipping

Company Profile

Titanium Seamless Tubes
Daxun produces:
Hot-finished Titanium Tubes
Our titanium tubes are expertly supplied in hot-rolled or hot-extruded forms. They are meticulously straightened and have machined inner and outer diameters with a polished surface finish. Available in both heat-treated and non-heat-treated variants, our tubes undergo rigorous 100% ultrasonic flaw detection to ensure impeccable quality.
Titanium Tube Materials Available:
Hot-rolled Titanium Tubes: OD ranges from 19mm to 325mm, with wall thickness between 9mm and 30mm, and lengths up to 5000mm. Hot-extruded Titanium Tubes: OD ranges from 50mm to 160mm, with wall thickness between 7mm and 35mm, and lengths up to 3000mm. All specifications can be customized based on mutual agreement between the manufacturer and the customer.
Cold-finished Titanium Tubes
Our cold-finished titanium tubes are provided in heat-treated form and undergo surface etching, hydrostatic, or ultrasonic testing based on manufacturing specifications. Available dimensions: OD from 6mm to 89mm, wall thickness from 0.5mm to 11mm, and lengths up to 6000mm. Custom agreements can be made between the manufacturer and the customer.

Titanium Welded Pipes
DaXun provides superior titanium pipes with diameters ranging from 12.7mm to 38.1mm (0.47 in to 1.5 in), wall thickness from 0.4mm to 1.65mm (0.016 in to 0.065 in), and lengths up to 25000mm. We offer electrical Gr1, Gr2, and Gr12 titanium alloy pipes for engineering and chemical industries. Our titanium welded pipes are crafted from flat rolled material using state-of-the-art automatic tungsten inert gas (argon) welding and heat-treated inline. Each pipe is subjected to stringent mechanical testing, geometric measurements, 100% ultrasonic and eddy current testing, as well as pneumatic or hydrostatic testing. We pack the pipes per customer specifications, ensuring compliance with ASTM B 338, ASME SB 338 standards through meticulous manufacturing processes and inspection test equipment.

CP GR1 Titanium tube PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.50 g/cc	0.163 lb/in³
a Lattice Constant	2.95 Å @Temperature 25.0 °C	2.95 Å @Temperature 77.0 °F	alpha phase
	3.29 Å @Temperature 900 °C	3.29 Å @Temperature 1650 °F	beta phase
c Lattice Constant	4.683 Å	4.683 Å @Temperature 77.0 °F	c/a = 1.587
Mechanical Properties	Metric	English	Comments
Hardness, Brinell	120	120	annealed
Hardness, Knoop	132	132	Estimated from Brinell.
Hardness, Rockwell B	70	70	annealed
Hardness, Vickers	122	122	Estimated from Brinell.
Tensile Strength	124 - 138 MPa @Temperature 427 °C	18000 - 20000 psi @Temperature 801 °F
	152 - 179 MPa @Temperature 316 °C	22000 - 26000 psi @Temperature 601 °F
	193 - 207 MPa @Temperature 204 °C	28000 - 30000 psi @Temperature 399 °F
Tensile Strength, Ultimate	240 MPa	34800 psi
Tensile Strength, Yield	170 - 310 MPa	24700 - 45000 psi
	76.0 - 90.0 MPa @Temperature 427 °C	11000 - 13100 psi @Temperature 801 °F	0.2% offset
	83.0 - 103 MPa @Temperature 316 °C	12000 - 14900 psi @Temperature 601 °F	0.2% offset
	110 - 124 MPa @Temperature 204 °C	16000 - 18000 psi @Temperature 399 °F	0.2% offset
Elongation at Break	24%	24%
	25 - 30 % @Temperature 427 °C	25 - 30 % @Temperature 801 °F
	30 - 35 % @Temperature 316 °C	30 - 35 % @Temperature 601 °F
	40 - 50 % @Temperature 204 °C	40 - 50 % @Temperature 399 °F
Reduction of Area	35%	35%
Tensile Modulus	103 GPa	14900 ksi
Compressive Modulus	110 GPa	16000 ksi
Poissons Ratio	0.37	0.37
Shear Modulus	45.0 GPa	6530 ksi
Charpy Impact	310 J	229 ft-lb	V-notch
Impact Test	136 J	100 ft-lb	Impact Strength
Coefficient of Friction, Dynamic	0.68	0.68	Ti sliding on Ti; 300 m/min
	0.8	0.8	Ti sliding on Ti; 40 m/min

 

CP GR2 Titanium tube PHYSICAL PROPERTIES
Density	Magnetic Permeability
0.163 lbs/in-3	Nonmagnetic
4.51 g/cm-3	Electrical Resistivity
Beta Transus (+/-25°F, +/--3.9°C)	21 µΩ/in
1680°F	0.53 µΩ/m
915°C	Elastic Modulus
Thermal Conductivity	15.2-17.4 Msi
12.60 BTU hr-1ft-1 °F-1	105-120 GPa
21.79 W m-1 °C-1	Typical values at room temperature of about 68-78°F (20-25°C)

 

GR5 TI6AL4V Titanium tube PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.43 g/cc	0.16 lb/in³
Mechanical Properties
Hardness, Brinell	334	334	Estimated from Rockwell C.
Hardness, Knoop	363	363	Estimated from Rockwell C.
Hardness, Rockwell C	36	36
Hardness, Vickers	349	349	Estimated from Rockwell C.
Tensile strength	min. 895MPa	129810 psi
Yield strength	min. 828MPa	120090 psi
Elongation at Break	min.10 %	10 %
Reduction of Area	min.25 %	25 %
Modulus of Elasticity	113.8 GPa	16500 ksi
Compressive Yield Strength	970 MPa	141000 psi
Notched Tensile Strength	1450 MPa	210000 psi	Kt (stress concentration factor) = 6.7
Ultimate Bearing Strength	1860 MPa	270000 psi	e/D = 2
Bearing Yield Strength	1480 MPa	215000 psi	e/D = 2
Poisson's Ratio	0.342	0.342
Charpy Impact	17 J	12.5 ft-lb	V-notch
Fatigue Strength	240 MPa	34800 psi	at 1E+7 cycles. Kt (stress concentration factor) = 3.3
Fatigue Strength	510 MPa	74000 psi	Unnotched 10,000,000 Cycles
Fracture Toughness	75 MPa-m½	68.3 ksi-in½
Shear Modulus	44 GPa	6380 ksi
Shear Strength	550 MPa	79800 psi	Ultimate shear strength
Electrical Properties
Electrical Resistivity	0.000178 ohm-cm	0.000178 ohm-cm
Magnetic Permeability	1.00005	1.00005	at 1.6kA/m
Magnetic Susceptibility	3.30E-06	3.30E-06	cgs/g
Thermal Properties
CTE, linear 20°C	8.6 µm/m-°C	4.78 µin/in-°F	20-100ºC
CTE, linear 250°C	9.2 µm/m-°C	5.11 µin/in-°F	Average over the range 20-315ºC
CTE, linear 500°C	9.7 µm/m-°C	5.39 µin/in-°F	Average over the range 20-650ºC
Specific Heat Capacity	0.5263 J/g-°C	0.126 BTU/lb-°F
Thermal Conductivity	6.7 W/m-K	46.5 BTU-in/hr-ft²-°F
Melting Point	1604 - 1660 °C	2920 - 3020 °F
Solidus	1604 °C	2920 °F
Liquidus	1660 °C	3020 °F
Beta Transus	980 °C	1800 °F

 

Certifications

Ti-6Al-4V - Grade 5 Titanium Tube

• Titanium Alloy - (UNS R56400)

INTRODUCTION

• DAXUN Ti-6Al-4V, Grade 5 Alloy Tube (UNS R56400) stands as the pinnacle of titanium alloys. This duplex alpha+beta titanium alloy, adeptly stabilized with aluminum and vanadium, showcases exceptional high-strength properties. It remains robust even at cryogenic temperatures, approximately 800°F (427°C). Utilized extensively in annealing, solution treatment, and aging processes, this alloy finds pivotal applications in jet engine compressor blades, discs, and rings; fuselage and space capsule components; pressure vessels; *** casings; helicopter rotor hubs; essential fasteners; and high-strength-to-weight ratio forgings.
• The creation of this alloy involves initial melting through vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM) techniques, followed by one or two vacuum arc remelting steps.

SPECIFICATIONS

• ASTM B338 - Heat-treatable Titanium Tubes Standard
• AMS 4928 - Forgings and Forging Stock (Annealed)
• AMS 4965 - Forgings (Solution Treated and Aged)
• AMS 4967 - Forgings (Annealed, Heat-treatable)

PHYSICAL PROPERTIES

• Melting Range: 2,800-3,000°F (1,538 - 1,649°C)
• Density: 0.160 lbs/cu. in.; 4.47 gm/cc
• Beta Transus Temperature: 1830°F (± 25°); 999°C (± 14°)

HEAT TREATMENT

• Annealing at 1,700-1,900°F (927 - 1,038°C) is performed to attain high hardness, tensile, and fatigue strength.
• DAXUN 6-4™, Grade 5 Alloy offers multiple heat treatment methodologies.
• 1. Anneal: 1,275 -1,400°F; (691 - 760°C), ½ to 2 hours, air or furnace cool
• 2. Stress Relief Anneal: 1,000 -1,200°F; (538 - 649°C), 1 to 8 hours, air or furnace cool
• 3. Solution Heat Treatment: 1,675 -1,750°F; (913 - 954°C), 1 hour, water quench
• 4. Aging Treatment: 975 -1,025°F; (524 - 552°C), 4 to 8 hours - air cool
• In the solution treated and aged condition, optimal properties are achieved in small cross sections that are rapidly quenched.
  Larger section sizes and/or delays in quenching can result in properties that are suboptimal.

HARDNESS

Typical hardness values range from Rockwell C 30-34 in the annealed condition to Rockwell C 35-39 in the solution and aged condition.

FORGEABILITY/ FORMABILITY

• DAXUN Ti-6Al-4V, Grade 5 alloy tubes are forged at 1,750°F (954°C), with an end forging temperature of 1,450°F (788°C). For optimal forging results, a reduction of at least 35% is recommended.
• DAXUN Ti-6Al-4V, Grade 5 alloy presents significant challenges in forming at room temperature, even when annealed. However, it allows for extreme forming operations, such as bending or stretching, at elevated temperatures up to 1,200°F (649°C) without compromising its mechanical properties. For hot sizing or forming, creep forming is effective within a temperature range of 1,000 to 1,200°F (538 to 649°C).

MACHINABILITY

• DAXUN Ti-6Al-4V, Grade 5 alloy can be machined using techniques suitable for austenitic stainless steels, involving slow speeds, heavy feeds, and rigid setups.
  Tooling should be robust, and a substantial volume of non-chlorinated cutting fluid is recommended.

WELDABILITY

• DAXUN Ti-6Al-4V Grade 5 Alloy Titanium Tube exhibits excellent weldability in both annealed and solution and partially aged conditions, with aging conducted during post-weld heat treatment.
• It is crucial to avoid contamination from oxygen, nitrogen, and hydrogen. Fusion welding can be achieved in an inert gas-filled chamber or with an inert gas tail shield for the molten metal and adjacent hot zone. Additionally, spot welding, seam welding, and flash welding can be performed without a protective environment.

SPECIAL PRECAUTIONS

• DAXUN Ti-6Al-4V, Grade 5 alloy is susceptible to hydrogen contamination from improper pickling and can absorb oxygen, nitrogen, and carbon during processes like forging, heat treatment, and brazing. Such contamination can reduce ductility, impacting notch sensitivity and forming capabilities.

Ti-6Al-4V Titanium Pipe - Grade 5 Titanium Tube

Titanium Alloy - (UNS R56400)
Introduction
DAXUN Ti-6Al-4V Titanium Tube, Grade 5 (UNS R56400) stands out as the most widely used titanium alloy. This duplex alpha+beta titanium alloy employs aluminum as the alpha stabilizer and vanadium as the beta stabilizer. Boasting high strength, it is effective even at low temperatures around 800°F (427°C). DAXUN Ti-6Al-4V, Grade 5 alloy is ideal for annealing, solution treating, and aging processes. Its applications extend to compressor blades, disks, and rings for jet engines, fuselage and space capsule components, pressure vessels, *** cases, helicopter rotor hubs, fasteners, and critical forgings requiring a high strength-to-weight ratio.
This alloy is initially fabricated through vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM). Subsequent remelting is carried out through one or two vacuum arc steps.
Specifications
• ASTM B338 - Standard Heat Treatable Titanium Tube
• AMS 4928 - Forgings and Forging Stock (Annealed)
• AMS 4965 - Forgings (Solution Treated and Aged)
• AMS 4967 - Forgings (Annealed, Heat Treatable)

Physical Properties

Ti-6Al-4V Titanium Tube Melting Range: 2,800-3,000°F (1,538 - 1,649°C)
Density: 0.160 lb/in3; 4.47 g/cm3
Beta Transus Temperature: 1830°F (± 25°); 999°C (± 14°)

Heat Treatment

Annealing is performed at temperatures of 1,700-1,900°F (927 - 1,038°C) when high hardness, tensile strength, and fatigue strength are critical.
DAXUN Ti-6Al-4V Grade 5 Titanium Tube supports diverse heat treatment methods to suit various requirements.
1. **Annealing**: Achieve optimal material properties with a controlled annealing process at temperatures ranging from **1,275 - 1,400°F** (691 - 760°C) for **½ to 2 hours**. Upon completion, allow the material to air cool or use a furnace to ensure uniform cooling.
2. **Stress Relief Annealing**: Enhance the durability of your titanium tube with stress relief annealing at **1,000 - 1,200°F** (538 - 649°C) for a period of **1 to 8 hours**. Post-process cooling can be achieved through air or furnace methods.
3. **Solution Heat Treating**: For superior mechanical properties, implement solution heat treating at **1,675 - 1,750°F** (913 - 954°C) for precisely **1 hour**, followed by an immediate water quench.
4. **Aging**: Maximize material strength through an aging process conducted at **975 - 1,025°F** (524 - 552°C) for **4 to 8 hours**, culminating in air cooling for consistency.

**Optimum Properties**

Achieve peak performance in small cross-sections with rapid quenching in the solution-treated and aged condition. Note that larger sections or delayed quenching may result in less optimal properties.

**Hardness**

In the annealed state, the typical hardness ranges from **Rockwell C 30-34**. Post solution and aging treatment, expect an enhanced hardness of approximately **Rockwell C 35-39**.

**Forgeability/Formability**

The **DAXUN Ti-6Al-4V Titanium Tube**, recognized for its superior Grade 5 Titanium composition, is ideally forged at **1,750°F** (954°C) with a final forging temperature of **1,450°F** (788°C). For optimal results, a reduction of at least **35%** is recommended.

While the **DAXUN Ti-6Al-4V Titanium Tube** poses formability challenges at room temperature, it can be efficiently manipulated through severe forming operations such as bending or stretching when conducted at temperatures up to **1,200°F** (649°C). Creep forming further allows for hot sizing and forming within the **1,000 to 1,200°F** (538 to 649°C) range without compromising mechanical integrity.

**Machinability**

The **DAXUN Ti-6Al-4V Titanium Tube** can be meticulously machined using techniques suitable for austenitic stainless steels. Employ slow speeds, high feeds, robust tool rigidity, and abundant use of non-chlorinated cutting fluids for precision and efficiency.

**Weldability**

Welding the **DAXUN Ti-6Al-4V Titanium Tube Grade 5** is feasible in both annealed and solution/partially aged states. Aging can be effectively integrated into post-weld heat treatment to enhance material properties.

Take necessary precautions to prevent contamination by oxygen, nitrogen, and hydrogen during welding. Fusion welding is best conducted in an inert gas-filled chamber or with an inert gas tail shield. Spot, seam, and flash welding are also viable without the need for a protective atmosphere.

**Special Considerations**

The **DAXUN Ti-6Al-4V Titanium Tube** is susceptible to hydrogen contamination from improper pickling and can absorb oxygen, nitrogen, and carbon during various processes like forging and heat treating. This contamination may adversely affect ductility, notch sensitivity, and formability, necessitating careful handling and monitoring.

FAQ

 

Q1: What products can you offer?

A: We offer a comprehensive range of steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, 300 series, along with 400 series, and duplex stainless steels like 2205, 2304, 2101, 2507, etc. Additionally, we provide high-nickel alloys such as 904L, 800H, and 600H.

Q2: Can you produce the products according to my own drawings?

A: Absolutely, we can manufacture products based on your drawings to ensure your complete satisfaction.

Q3: How does your factory manage quality control?

A: Quality is our top priority. We place great emphasis on maintaining quality control from the very beginning to the end of production.

Q4: Can I request changes in packaging and transportation?

A: Yes, we can accommodate changes in packaging and transportation based on your requests. However, you will need to bear any additional costs incurred during this period.

Q5: How does your factory manage quality control?

A: Quality is our top priority. We place great emphasis on maintaining quality control from the very beginning to the end of production.

Q6: What is your delivery time?

A: Our standard delivery time is 7 to 20 working days after payment confirmation.
If your order is urgent, we can prioritize it to expedite completion.

Q7: What are your payment terms?

A: We offer the following payment options:

B: 30% T/T in advance, with the remaining 70% due before shipment.

C: 100% Irrevocable LC at sight (for large orders).

Q8: Can you provide DDQ (Deep Drawing Quality) materials?

A: Yes, we can. Our materials are suitable for deep drawing applications such as stainless steel pots, sinks, and bowls. Let us know your specific requirements, and we will adjust the mechanical properties accordingly.

Q9: How can I obtain a sample?

A: We offer FREE samples for your evaluation and testing. For small sample pieces, we can cover the courier cost, depending on your location.

Q10: To which countries have you exported your products?

A: We have successfully exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.

Q11: How can I visit your company?

A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.