| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | GR1 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global producer and supplier of top-tier Grade 1 titanium plates.
Pure Grade 1 titanium plates boast exceptional ductility and cold formability, making them perfect for deep drawing. Renowned for their superior resistance to general and seawater corrosion, these plates also excel in resisting oxidizing, neutral, and mildly reducing media, including chlorides. With a low density-roughly half that of nickel-based alloys-a high strength-to-weight ratio, and remarkable corrosion resistance, Grade 1 titanium is an optimal choice for various challenging chemical environments. This commercially pure titanium is the softest and most ductile available, offering excellent cold formability, outstanding corrosion resistance, superb weldability, and good impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, and Titanium Gr 1 Finished Plates. Suppliers of ASTM B265 Titanium Grade 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, and Titanium Gr 1 Cold Rolled Plates. Dealers in Titanium Gr 1 Patterned Plates, Perforated Plates, and Titanium ASTM B265 Gr 1 Sheets. Manufacturers of Gr 1 Titanium Sheets and Plates in China.
We ensure prompt and efficient delivery of Grade 1 titanium plate products. Our speed is backed by a comprehensive system encompassing production capacity, information flow, logistics, and capital flow. For instance, Daxun's order data is instantaneously pushed to the logistics system, ensuring seamless data integration. Strategically located processing centers near highways, rivers, and seas facilitate timely execution with rational scheduling, quick response, coordinated storage and transportation, and efficient loading.
Grade 1 titanium plates, known for their lower density and high ductility, are suited for industries prioritizing weight control and deep drawing processes. Key industries include medical, chemical equipment, and aerospace. The exceptional strength and corrosion resistance of Grade 1 titanium make it ideal for marine, chemical processing, and desalination applications. Typical uses include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and various industrial components. Common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
The cold rolled thickness range for Grade 1 Titanium Plates spans from 0.3 mm to 6.0 mm, while the hot rolled range extends from 4.76 mm to 155 mm. These plates are provided in either hot rolled or heat treated conditions, produced through longitudinal and transverse rolling. If necessary, creep flattening may be employed as a heat treatment to relieve internal stresses and achieve special flatness requirements. The plates can also be supplied as cut blanks-parts with complex shapes cut from a parent plate-tailored to customer specifications through mechanical or chemical processing.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN, a distinguished expert in the metal industry, specializes in both small and large titanium plate projects. As a cornerstone of titanium plate solutions, DAXUN stands as your steadfast partner, ready to deliver not only premium titanium plates but also unparalleled technical support. Beyond being a supplier, DAXUN emerges as a strategic ally, committed to overcoming challenges and fulfilling your requirements, ensuring the successful completion of your projects.
Located in China, DAXUN's state-of-the-art service center boasts an extensive inventory of titanium plate products, enabling swift order processing. Our offerings go beyond simple transactions, featuring basic processing, precision water jet cutting, and efficient plate nesting. This comprehensive approach adds significant value, optimizing both time and cost for our esteemed customers.
With relentless investment in cutting-edge production facilities and strategic capacity agreements, DAXUN remains at the pinnacle of titanium plate quality, now and well into the future.
Reach out to DAXUN today to discover the most competitive titanium plate prices and access comprehensive technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Committed to producing the world's highest-performance titanium alloy plates, we ensure rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we stock alloy titanium plates Grade 5 (UNS R56400) with thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm+ forged). Grade 5 titanium plate (Ti-6Al-4V), known as the "workhorse" of titanium alloys, offers exceptional strength, ductility, and superior resistance to corrosion and high temperatures, making it indispensable in both general and military industries. Compliant with standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate is primarily utilized across aerospace, military, power industry, vehicle armor, rocket precision guidance systems, marine sectors, and more.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of superior Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts outstanding ductility and cold formability, making it perfect for deep drawing. Renowned for its excellent general and seawater corrosion resistance, Grade 1 titanium also withstands oxidizing, neutral, and mildly reducing environments, including chlorides. With half the density of nickel-based alloys, titanium's high strength-to-weight ratio and corrosion resistance make it ideal for a variety of challenging chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, featuring excellent cold formability, exceptional corrosion resistance, outstanding weldability, and good impact hardness.
Producers of ASTM B265 Titanium Grade 1 Plates, including Titanium Gr 1 Sheets, Finished Plates, Coils, Pure Titanium Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. As leading manufacturers and suppliers from China, we offer a comprehensive range of ASTM B265 Titanium Grade 1 products for all your needs.
Grade 2
DAXUN excels in producing and stocking commercially pure titanium plates Grade 2 (UNS R50400), with thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the industry standard within the commercially pure titanium category, combining high strength, ductility, and outstanding corrosion resistance suitable for numerous industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium, perfectly balances strength and ductility. It offers notable impact strength, effortless weldability, and superior resistance to corrosion in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also demonstrates exceptional resistance to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and excellent corrosion resistance, titanium is an ideal material for a broad spectrum of applications. Grade 2 Titanium Plate efficiently resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications requiring robust ductility and corrosion resistance.
DAXUN is your quintessential metal expert, dedicated to both small and large titanium plate projects. As your strategic partner, DAXUN is poised to provide unparalleled technical assistance and guidance alongside a wide range of industrial pure and alloy titanium plates. Consider DAXUN not merely as a supplier but as a trusted ally in overcoming challenges and achieving your project's objectives.
At DAXUN's premier service center in China, we maintain a ready stock of premium titanium plate products, ensuring swift order fulfillment. With our advanced basic processing capabilities, precise water jet cutting, and efficient plate nesting, we deliver exceptional value to our customers, significantly reducing their time and costs.
DAXUN's relentless investment in state-of-the-art production facilities, coupled with strategic capacity agreements with our esteemed partners, propels us to the pinnacle of titanium plate quality. We are committed to maintaining this leadership now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical information.
Q1: What products can you offer?
A: We specialize in providing a diverse range of high-quality steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we offer 300 and 400 series stainless steel, as well as duplex stainless steels such as 2205, 2304, 2101, and 2507. Our portfolio also includes high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products exactly according to your drawings, ensuring that the final output meets your highest satisfaction.
Q3. How does your factory handle quality control?
A: Quality is our topmost priority. We employ rigorous quality control measures throughout the production process, from the initial stages to the final product, to ensure superior standards are maintained.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can customize the packaging and transportation methods according to your specific requests.
However, any additional costs incurred during this customization process will be borne by you.
Q5. How does your factory handle quality control?
A: Quality is our topmost priority. We employ rigorous quality control measures throughout the production process, from the initial stages to the final product, to ensure superior standards are maintained.
Q6. How long is the delivery time?
A: Our standard delivery time ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite the process to meet your timeline.
Q7. What are your payment options?
A: We offer the following payment terms: 100% T/T in advance, Western Union for small orders, 30% T/T deposit with the balance 70% due before shipment, or 100% Irrevocable LC at sight for large orders.
Q8: Can you provide Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for manufacturing stainless steel pots, sinks, bowls, and other products. Let us know your specific requirements, and we will adjust the mechanical properties to meet your needs.
Q9: How can I get a sample?
A: We provide FREE samples for your evaluation and testing. If only a small piece is required, we can cover the courier costs based on the situation.
Q10: Which countries have you exported to?
A: We have successfully exported our stainless steel materials to various countries, including Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, UAE, Ukraine, and many others.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, where we will arrange to pick you up for a visit to our company.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}