| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | GR1 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global producer and supplier of top-notch Grade 1 titanium plates.
Our Pure Grade 1 Titanium Plate is renowned for its exceptional ductility and cold formability, making it a prime choice for deep drawing applications. Grade 1 titanium boasts outstanding general and seawater corrosion resistance, as well as resilience against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (approximately half that of nickel-based alloys), an impressive strength-to-weight ratio, and superb corrosion resistance, titanium is ideal for a myriad of harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile variety, featuring excellent cold formability, corrosion resistance, weldability, and impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Suppliers of Titanium Gr 1 Sheets, Finished Plates, and Coils. We specialize in Pure Titanium Gr 1 Hot Rolled and Cold Rolled Plates, ASTM B265 Gr 1 Sheets, Patterned Plates, and Perforated Plates. We are leading Manufacturers and Dealers of Titanium Grade 1 Sheets and Plates in China.
We ensure timely and rapid delivery of Grade 1 Titanium Plate products. Our efficiency is backed by a robust system encompassing production capacity, information flow, logistics, and capital flow. For instance, Daxun's order data is instantly relayed to our logistics system, ensuring seamless data integration. Our processing centers, strategically located near highways, rivers, and seas, facilitate optimal logistics scheduling, swift responses, and efficient storage and transportation, guaranteeing on-time task completion.
Grade 1 Titanium Plate, with its lower density and superior ductility, is perfect for industries where weight considerations and deep drawing processes are critical. Key sectors include medical, chemical equipment, and aerospace industries. The strength and corrosion resistance of Grade 1 titanium make it ideal for marine, chemical processing, and desalination applications. Common uses of Grade 1 titanium alloys include oil and gas components, reaction and pressure vessels, piping systems, power systems, heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Adhering to standards such as ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
Grade 1 Titanium Plates are available in a cold rolled thickness range of 0.3 mm to 6.0 mm, and a hot rolled thickness range of 4.76 mm to 155 mm. These plates are supplied in hot rolled or heat treated conditions and produced through longitudinal and transverse rolling. To meet specific flatness requirements, creep flattening can be applied as a heat treatment to relieve internal stresses. The plates can be supplied as cut blanks, tailored to complex shapes as per customer requirements, with further processing options available, either mechanically or chemically.
Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a renowned titan in the world of metal, dedicated to both small and large-scale titanium plate projects. As your ultimate reference point and long-term ally, DAXUN is prepared to provide your business with top-tier titanium plates and comprehensive technical assistance. Trust DAXUN not just as your supplier of premium industrial pure titanium plates and titanium alloy plates, but as your strategic partner, ready to help you overcome any challenges and meet your evolving needs. With DAXUN by your side, achieving your project goals has never been easier.
DAXUN's state-of-the-art service center in China boasts an extensive stock of titanium plate products, ensuring rapid order processing. Through advanced processing techniques such as water jet cutting and plate nesting, we deliver unmatched value to our customers, significantly reducing both time and costs.
Through relentless investment in production facilities and strategic capacity agreements with our partners, DAXUN ensures it remains at the pinnacle of titanium plate quality, now and in the future.
Reach out to DAXUN today to discover the latest titanium plate prices and detailed technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to create the world's finest high-performance titanium alloy plates, ensuring swift global delivery. We offer ASTM B265 Grade 2 and Grade 5 Titanium Plates, producing and stocking Grade 5 (UNS R56400) with thicknesses between 0.5mm and 300mm. Our production processes include cold rolling (0.5mm-6.0mm), hot rolling (6.0-50mm), and forging (50mm and above). The Grade 5 titanium plate (Ti-6Al-4V) stands out for its remarkable strength, ductility, corrosion resistance, and high-temperature tolerance, making it highly sought after by various general and military industries. Compliance standards include ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 Titanium Plate is predominantly utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, and marine industry.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of superior-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate is distinguished by its exceptional ductility and cold formability, ideal for deep drawing applications. Known for its excellent resistance to general and seawater corrosion, Grade 1 titanium also withstands oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and corrosion resistance make it an outstanding choice for challenging chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, boasting excellent cold formability and weldability, as well as good impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, and Suppliers of ASTM B265 Titanium Grade 1 Coils. We offer Pure Titanium Gr 1 Hot Rolled Plates, Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Patterned Plates, Perforated Plates, and more. Your go-to manufacturers in China for Titanium Grade 1 Sheets and Plates.
Grade 2
DAXUN specializes in producing and stocking commercially pure titanium plates, Grade 2 (UNS R50400), with thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is renowned as the 'workhorse' of commercially pure titanium, offering excellent strength, ductility, and corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering a superb balance of strength and ductility. It features excellent impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it shows exceptional resistance to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and exceptional corrosion resistance, titanium is ideal for diverse applications. It effectively combats stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications necessitating good ductility and corrosion resistance.
DAXUN is a metal expert dedicated to both small and large-scale titanium plate projects. We are your reference point and long-term partner, ready to supply titanium plates and offer any technical assistance you require. Think of DAXUN not only as your supplier of industrial pure titanium plates and titanium alloy plates but also as your strategic partner dedicated to helping you meet any challenges and achieve your project goals.
At Jiangsu Daxun Alloy Co., Ltd., our premier service center in China boasts an extensive inventory of titanium plates, ensuring rapid order fulfillment. Leveraging advanced basic processing techniques, precise water jet cutting, and efficient plate nesting, we deliver unparalleled value to our customers, dramatically reducing both time and costs.
Through relentless investment in state-of-the-art production facilities and strategic capacity partnerships, Jiangsu Daxun Alloy Co., Ltd. continually sets the benchmark for titanium plate excellence, positioning DAXUN as a leader in both current and future titanium plate quality.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today to access the most competitive prices and detailed technical specifications for our high-quality titanium plates.
Q1: What range of products do you offer?
A: We specialize in providing various general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L 300.
Additionally, we offer the 400 series and duplex stainless steels such as 2205, 2304, 2101, 2507, and more. Our selection extends to high-nickel alloys like 904L, 800H, and 600H.
Q2: Can your products be made according to my custom drawings?
Absolutely! We can manufacture products tailored to your specific drawings, ensuring maximum satisfaction.
Q3: What measures do you take for quality control in your factory?
Quality is our top priority. We implement stringent quality control procedures from the very beginning to the final stages of production.
Q4: Is it possible to request changes to the packaging and transportation methods?
Yes, we can accommodate your requests for changes in packaging and transportation formats.
Please note, however, that you will need to cover any additional costs incurred during this process.
Q5: What steps do you take for quality control in your factory?
Quality is our foremost concern. We meticulously manage quality control from inception to completion.
Q6: What is your typical delivery time?
A: Our standard delivery time ranges from 7 to 20 working days post payment confirmation.
For urgent orders, we expedite the production process to meet your deadlines.
Q7: What are your payment terms?
A: 100% T/T in advance or Western Union for smaller orders.
B: 30% T/T upfront and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight for larger orders.
Q8: Do you provide Deep Drawing Quality (DDQ) materials?
A: Yes, we do. Our materials are suitable for making stainless steel pots, sinks, bowls, etc. Inform us of your usage, and we'll adjust the mechanical properties to meet your requirements.
Q9: How can I obtain a sample?
A: We offer FREE samples for your inspection and testing. For small pieces, we can cover the courier cost, subject to terms.
Q10: Which countries have you exported to so far?
A: We have shipped our stainless steel materials to various countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}