| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | GR1 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global producer and supplier of superior Grade 1 titanium plate.
Pure Grade 1 titanium plate boasts unparalleled ductility and cold formability, making it perfect for deep drawing applications. Renowned for its exceptional general and seawater corrosion resistance, Grade 1 titanium also excels in resisting oxidizing, neutral, and mildly reducing media, including chlorides. With its low density (approximately half of nickel-based alloys), impressive strength-to-weight ratio, and robust corrosion resistance, titanium is the ideal material for numerous harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, offering superior cold formability, outstanding corrosion resistance, excellent weldability, and remarkable impact hardness.
Producers and Suppliers of ASTM B265 Titanium Gr 1 Plates, Sheets, Hot Rolled Plates, Cold Rolled Plates, Coils, Patterned Plates, and Perforated Plates. Trusted Manufacturers and Dealers of Titanium Gr 1 Products in China.
We ensure timely and rapid delivery of Grade 1 titanium plate products, backed by a robust system from production capacity to logistics and capital flow. For instance, in terms of information flow, Daxun's order data is seamlessly connected to the logistics system in real-time. In logistics, our processing center's strategic proximity to highways, rivers, and seas facilitates efficient scheduling, rapid response, and seamless storage and transportation linkages. This ensures that every delivery task is completed punctually.
Grade 1 titanium plate, with its lower density and greater ductility, is perfect for industries prioritizing weight management and deep drawing processes. Prime industries include medical, chemical equipment, and aerospace sectors. The strength and corrosion resistance of Grade 1 titanium also make it ideal for applications in marine, chemical processing, and desalination industries. Key applications include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and many other industrial components. Adheres to common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
The cold rolled thickness range for Grade 1 Titanium Plates spans from 0.3 mm to 6.0 mm, supplied in hot rolled or heat treated conditions. Hot rolled thickness ranges from 4.76 mm to 155 mm, produced by longitudinal and transverse rolling. If needed, creep flattening is utilized as a heat treatment to relieve internal stresses and meet special flatness requirements. Plates can be supplied as cut blanks, with further processing tailored to customer specifications, utilizing either mechanical or chemical methods.
Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition of Grade 2 Titanium Sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert specializing in both small and large titanium plate projects. As your dedicated and long-term partner, DAXUN is committed to providing your business with high-quality titanium plates and comprehensive technical assistance. Beyond being a leading supplier of industrial pure titanium plates and titanium alloy plates, DAXUN stands as a strategic ally, ready to tackle any challenges and cater to your specific needs, ensuring the successful realization of your project goals.
DAXUN's state-of-the-art service center in China boasts a robust inventory of titanium plate products, enabling swift order processing. By offering essential processing services such as water jet cutting and plate nesting, we deliver added value to our customers, significantly reducing their time and costs.
Through relentless investment in our production facilities and strategic capacity agreements with our partners, DAXUN ensures it remains at the cutting edge of titanium plate quality, both now and in the future.
Reach out to DAXUN today to receive the latest information on titanium plate prices and technical specifications.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a distinguished Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! With our unwavering commitment to producing world-class, high-performance titanium alloy plates, we ensure swift global deliveries. Our offerings include ASTM B265 Grade 2 and Grade 5 Titanium Plates, available in thicknesses ranging from 0.5mm to 300mm. Our plates are categorized by production methods (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm+ forged). Grade 5 titanium plate (Ti-6Al-4V) is the cornerstone of titanium alloys, known for its exceptional strength, ductility, and resistance to corrosion and high temperatures, making it indispensable in both general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and other stringent standards.
Primarily utilized in aerospace, military, power generation, vehicle armor, precise rocket guidance components, and marine applications, the Ti-6Al-4V Grade 5 Titanium Plate stands as a versatile material that meets diverse industry requirements.
Grade 1
Today, DAXUN Alloys is celebrated globally as a premier producer and supplier of high-quality Grade 1 Titanium Plates.
Our Pure Grade 1 Titanium Plates boast excellent ductility and cold formability, making them perfect for deep drawing applications. Noted for their superb general and seawater corrosion resistance, they are also resistant to oxidizing, neutral, and mildly reducing environments, including chlorides. With a low density-approximately half that of nickel-based alloys-and a high strength-to-weight ratio, Grade 1 Titanium is ideal for demanding chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile grade, featuring excellent cold formability, outstanding corrosion resistance, superb weldability, and good impact hardness.
We are the top producers and suppliers of ASTM B265 Titanium Grade 1 Plates, offering an extensive range of products including Titanium Grade 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. Based in China, we cater to global demands with unmatched quality and reliability.
Grade 2
DAXUN proudly manufactures and stocks a variety of commercially pure Titanium Plates Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate is recognized as the 'workhorse' among commercially pure titanium grades, offering a balanced combination of strength, ductility, and excellent corrosion resistance across various industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium, offers an exceptional blend of strength and ductility. Known for its impressive impact strength and ease of welding, it provides excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***, along with outstanding resistance to seawater and salt solutions.
Thanks to its low density, high strength-to-weight ratio, and superior corrosion resistance, titanium is ideal for numerous applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the alloy of choice for most industrial applications necessitating good ductility and corrosion resistance.
DAXUN is your trusted metal expert for both small and large titanium plate projects. Positioned as a key reference point and long-term partner, we are committed to providing exceptional titanium plates and comprehensive technical support to meet your specific business needs. DAXUN is not just a supplier but a strategic ally, dedicated to helping you overcome any challenges and achieve your project goals efficiently and effectively.
At DAXUN's premier service center in China, we maintain a comprehensive stock of titanium plate products, ensuring rapid order fulfillment. With our advanced capabilities in basic processing, water jet cutting, and plate nesting, we deliver unparalleled value to our customers, significantly reducing their time and cost investments.
DAXUN remains at the pinnacle of titanium plate quality through relentless investment in our state-of-the-art production facilities and strategic capacity agreements with our trusted partners. This commitment guarantees that DAXUN continues to lead the industry both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and up-to-date technical information. Our dedicated team is ready to support your requirements with precision and excellence.
Q1: What products can you offer?
A: We proudly offer a diverse range of general steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we provide the 300 series.
You'll also find our extensive offerings include the 400 series, various duplex stainless steels like 2205, 2304, 2101, and 2507, as well as high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Absolutely! We specialize in custom productions based on your precise drawings to ensure your utmost satisfaction.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We consistently place significant emphasis on stringent quality control measures from beginning to end.
Q4. Can I request to change the form of packaging and transportation?
Certainly! We can modify the packaging and transportation methods to suit your needs.
However, please note that you will be responsible for any additional costs incurred during this period, including any price differences.
Q5. How does your factory do regarding quality control?
Quality is a priority. We always attach great importance to quality controlling from the beginning to end.
Q6. How long is the delivery time?
A: Delivery typically takes 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite the process to ensure timely completion.
Q7. What is your Payment?
A: For small orders, we accept 100% T/T in advance or Western Union.
B: For standard orders, 30% T/T in advance and 70% balance before shipment.
C: For large orders, we accept 100% Irrevocable LC at sight.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are ideal for producing stainless steel pots, sinks, bowls, etc. Share your specific requirements, and we'll adjust the mechanical properties to suit your needs.
Q9: How to get a sample?
A: We offer FREE samples for your evaluation and testing. If it's a small piece, we may cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: To date, our stainless steel materials have been exported to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How to visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}