| Customization: | Available |
|---|---|
| Type: | Stainless Steel Bars |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Parameters: Stainless Steel rod | |
| Material | 201 |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. | |
| Under Third Party Inspection | |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Chemical Composition for 201 Stainless Steel Rod
Chemical Composition (wt%) limits are specified according to ASTM A240 and ASME SA240 standards*
| Element | 201 |
| Carbon | 0.15 |
| Chromium | 16.0-18.0 |
| Nickel | 3.5-5.5 |
| Manganese | 5.50-7.50 |
| Silicon | 1.00 |
| Nitrogen | 0.25 |
| Phosphorus | 0.060 |
| Sulfur | 0.030 |
Mechanical Properties for 201 Stainless Steel Rod
Mechanical property requirements for annealed products are specified according to ASTM A240 and ASME SA240 standards
| Property | 201 |
| Yield Strength, min. (ksi) | 45 |
| Tensile Strength, min. (ksi) | 95 |
| Elongation, min. (%) | 40 |
| Hardness, max. (Rb) | 100 |
The mechanical property requirements for cold worked flat rolled products are rigorously set forth in the specified guidelines to ensure optimum performance and durability. Introducing the 201 Stainless Steel Rod from Jiangsu Daxun Alloy Co., Ltd., a perfect blend of strength and versatility.
| Condition | Yield Strength (ksi) min. |
Tensile Strength (ksi) min. |
Elongation % min. in 2 in. | |
| <0.015 in. | ≥0.015 in. | |||
| ¼ Hard | 75 | 125 | 25 | 25 |
| ½ Hard | 110 | 150 | 15 | 18 |
| ¾ Hard | 135 | 175 | 10 | 12 |
| Full Hard | 140 | 185 | 8 | 9 |
Unmatched Physical Properties
Discover the superior physical properties of our Type 201 Stainless Steel Rod, designed for high durability and resilience.
| Property | 201 |
| Density, lb/in3 | 0.283 |
| Modulus of Elasticity, psi | 28.6 x 106 |
| Coefficient of Thermal Expansion, 68-212˚F, /˚F | 9.2 x 10-6 |
| Thermal Conductivity, Btu/ft hr ˚F | 9.4 |
| Specific Heat, Btu/lb ˚F | 0.12 |
| Electrical Resistivity, Microohm-in | 27.0 |
Our forming capabilities are bolstered by state-of-the-art radial forging machines, advanced heat treatment and melting furnaces, as well as rolling mills. Additionally, our unique hydroforming process is tailored for producing precision parts.
The stainless steel rod heat treatment utilizes cutting-edge furnace technology to ensure exceptional material stability and high performance.
At Daxun Stainless Steel, we employ the world's most advanced vacuum induction furnace, vacuum consumable furnace, and electroslag furnace. This reduces impurities during the smelting process, thereby enhancing the performance of our finished stainless steel rods.
Our stainless steel products come fully certified and traceable, ensuring you receive the utmost quality. We proudly supply top-tier stainless steel to a diverse range of industries, including aerospace, industrial, medical, marine, and military sectors.
| Tensile Strength | Yield Strength | |||||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. | |||||
| Grade | Tensile Str | Yield Str | Elong | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell B (HR B) max | Brinell (HB) max | |||
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| Tensile Strength | Yield Strength | ||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell C (HR C) | Brinell (HB) | |||
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
| 2507/ S32750 |
Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi | |
| Ultimate Tensile Strength | 116 ksi | |
| 0.1% Offset Yield Strength 0.2% | 91 ksi | |
| Elongation in 2 inches, % | 15% | |
| Hardness Rockwell C | 32 | |
| Impact Energy | 74 ft.-lbs | |
| Density | 0.28 lb per inch3 | |
| Modulus of elasticity | 28 x 10(6) psi | |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of | |
| Thermal conductivity | 8.7 Btu/hr ftoF | |
| Heat capacity | 0.12 Btu/ lb oF | |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
Can you manufacture SS grinding bars & rods?
Yes, we specialize in producing SS grinding bars & rods with unmatched precision in dimension, roundness, and straightness, offering superior performance compared to stainless steel polished bars. However, please note that the processing costs are higher.
Q1: What products can you offer?
A: We provide a wide range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, 300
series, 400 series, and duplex stainless steel such as 2205, 2304, 2101, 2507, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2: Can you produce the products according to my drawings?
Yes, we can customize products precisely according to your drawings to ensure your utmost satisfaction.
Q3: How does your factory manage quality control?
Quality is our top priority. We consistently emphasize rigorous quality control from the initial stages to the final product.
Q4: Can I request changes in packaging and transportation?
Yes, we can adapt the packaging and transportation to your requests.
However, please be aware that you will need to cover any additional costs and differences incurred during this period.
Q5: How does your factory manage quality control?
Quality is our top priority. We consistently emphasize rigorous quality control from the initial stages to the final product.
Q6: What is the delivery time?
A: The delivery time is typically 7-20 working days after payment confirmation.
For urgent orders, we can expedite the process to ensure timely completion.
Q7: What are your payment terms?
A: 100% T/T in advance, Western Union (for small orders)
B: 30% T/T in advance and 70% balance before shipment
C: 100% Irrevocable LC at sight (for large orders)
Q8: Can you produce DDQ (Deep Drawing Quality) material?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Provide us with your specific requirements, and we will adjust the mechanical properties accordingly.
Q9: How can I get a sample?
A: FREE samples are available for your examination and testing. For small sample pieces, we may cover the courier cost depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported our stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, UAE, Ukraine, and many more.
){kind=link}