High Strength Stainless Steel Rod Price ASTM 304 316 321 310S 2205 2507 Hot Rolled and Cold Rolled Bright Stainless Steel Rod

• Customization: Available
• Type: Stainless Steel Bars
• Standard: ASTM, AISI, GB, JIS, DIN, EN
• Model NO.: 304 STAINLESS STEEL ROD
• Grade: 304 316 321 310S 2205 2507
• Certification: ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
• Shape: Round
• Technique: Hot Rolled
• Surface Treatment: Bright
• Material: 304 316 321 310S 2205 2507
• Transport Package: Wooden Box or Wooden Pallet
• Specification: φ 3.0mm-350mm
• Trademark: TISCO POSCO Baosteel
• Origin: China
• Production Capacity: 10000ton

Product Description

Product Description

 

Detailed Photos

Product Parameters:   Stainless Steel rod
Material	201 304 316 321 309 310S 2205 2507 410 420 430 904L 17-4PH 440 440C
Specifications	ASTM A276, ASME SA276 / ASTM A479  ASME SA479
Dimensions	EN, DIN, JIS, ASTM, BS, ASME, AISI
Round Bars	Outside Diameter in the range of 4mm to 500mm
Bright Bars	Outside Diameter in the range of 4mm to 100mm
Hex Bars	18mm - 57mm (11/16″ to 2-3/4″)
Finish	Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length	1 to 6 Meters, Custom Cut Lengths
Form	Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Marking & Traceability	Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end.
Test Certificate	Manufacturer Test Certificate according to EN 10204 3.1 B
	Laboratory Test Certificate from Govt. Approved Lab.
	Under Third Party Inspection
Testing & Inspection	Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing

 

Hot rolled Stainless steel rod
Stainless steel rod and bar is heated and rolled through multiple passes in a rolling mill. It has complete specifications and its performance meets standards and requirements.

Cold drawn bright Stainless steel rods
Cold-drawn Stainless steel rods are Stainless steel rods drawn under cold working conditions. They have a smooth surface and can also be polished and ground.

Forged Stainless steel rod and bar
Forged Stainless steel rods are forged multiple times to improve the mechanical properties and higher strength of the Stainless steel rods.

 

General Properties
Our network of service centers stocks stainless steel bar products for fast, ready supply of common bar sizes and alloys. We also produce custom sized stainless steel bars, and if quantities are below the factory minimum, we can arrange a stocking program for prompt, fast turnaround. Daxun Alloys stocks stainless steel round bars from 1/16" to 26" in diameter. Round bars are available in nearly every grade of stainless steel, including 302, 303, 304/L, 309/S, 310/S, 316/L, 317/L, 321, 321/H, 347, 347H, 410, 416, 420, 440C, 17-4PH, Duplex 2205, and Alloy 20

 

Additional Services
The majority of our inventory is our unique processed bar grade: stainless steel round bars, which are melted to consistent standards to improve machinability and reduce the total cost of each part. Our stainless steel bar processing machinery enables Daxun Alloys to produce to the precise specifications of our customers.

1. Daxun can perform heat treatments on our stainless steel bars. This will depend on the chemistry of the metal being treated. 2. Positive Material Identification (PMI) In some cases, additional Positive Material Identification testing may need to be completed. Daxun Stainless Steel Products can complete this testing in-house or work with an independent laboratory to complete the testing. 3. Ultrasonic Testing (UT) Utilizes high frequency sound energy to inspect and measure stainless steel bar products. This helps with defect detection/evaluation, dimensional measurement, etc.

304/304L/304LN/304H stainless steel bar composition
Grade	304	304L	304LN	304H
UNS Designation	S30400	S30403	S30453	S30409
Carbon (C) Max.	0.08	0.030*	0.03	0.04 - 0.10
Manganese (Mn) Max.	2	2	2	2
Phosphorous (P) Max.	0.045	0.045	0.045	0.045
Sulphur (S) Max.	0.03	0.03	0.03	0.03
Silicon (Si) Max.	1	1	1	1
Chromium (Cr)	18.0-20.0	18.0-20.0	18.0-20.0	18.0-20.0
Nickel (Ni)	8.0-11.0	8.0-11.0	8.0-11.0	8.0-11.0
Molybdenum (Mo)	-	-	-	-
Nitrogen (N)	-	-	0.10-0.15	-
Iron (Fe)	Bal.	Bal.	Bal.	Bal.
Other Elements	-	-	-	-

316/316L316H stainless steel bar composition
Grade		C	Mn	Si	P	S	Cr	Mo	Ni	N
316	Min	-	-	-	0	-	16	2	10	-
	Max	0.08	2	0.75	0.045	0.03	18	3	14	0.1
316L	Min	-	-	-	-	-	16	2	10	-
	Max	0.03	2	0.75	0.045	0.03	18	3	14	0.1
316H	Min	0.04	0.04	0	-	-	16	2	10	-
	max	0.1	0.1	0.75	0.045	0.03	18	3	14	-

321/321H stainless steel bar composition
Grade	321	321H
UNS Designation	S32100	S32109
Carbon (C) Max.	0.08	0.04-0.10
Manganese (Mn) Max.	2	2
Phosphorous (P) Max.	0.04	0.04
Sulphur (S) Max.	0.03	0.03
Silicon (Si) Max.	0.75	0.75
Chromium (Cr)	17.0-20.0	17.0-20.0
Nickel (Ni)	9.0-12.0	9.0-12.0
Molybdenum (Mo)	-	-
Nitrogen (N)	0.1 Max.	0.1 Max.
Iron (Fe)	Bal.	Bal.
Other Elements	Ti=5(C) to 0.70%	Ti=4(C) to 0.60%

310/310S stainless steel bar composition
Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 310	0.015 max	2.0 max	0.15 max	0.020 max	0.015 max	24.00 - 26.00	0.10 max	19.00 - 21.00	54.7 min
SS 310S	0.08 max	2.0 max	1.00 max	0.045 max	0.030 max	24.00 - 26.00	0.75 max	19.00 - 21.00	53.095 min

For more information on stainless steel rods, please contact Daxun

Packaging & Shipping

 

Company Profile

Mechanical properties of various grades of stainless steel bars

	Tensile Strength			Yield Strength
Alloy	UNS Designation	Spec.	psi	MPa	ksi	psi	MPa	ksi	Elongation in 2 inches (min.) %	Grain Size Req.	Max. Hardness	Modulus of Elasticity (x106 psi)
304	S30400	A249, A312	75,000	515	75	30,000	205	30	35	-	90 Rb	28
304L	S30403	A270 A312	70,000	485	70	25,000	170	25	35	-	90 Rb	28
304LN	S30453	A249, A688	75,000	515	75	30,000	205	30	35	-	90 Rb	28
304H	A30409	A249, A312	75,000	515	75	30,000	205	30	35	7 or coarser	90 Rb	28

The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table.
Grade	Tensile Str	Yield Str	Elong	Hardness
	(MPa) min	0.2% Proof	(% in 50mm) min
		(MPa) min		Rockwell B (HR B) max	Brinell (HB) max
316	515	205	40	95	217
316L	485	170	40	95	217
316H	515	205	40	95	217

	Tensile Strength			Yield Strength
Alloy	UNS Designation	Spec.	psi	MPa	ksi	psi	MPa	ksi	Elongation in 2 inches (min.) %
321	S32100	-	75,000	515	-	30,000	205	-	35
321H	S32109	-	75,000	515	-	30,000	205	-	35

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
310S	7.9 g/cm3	1402 °C (2555 °F)	Psi - 75000 , MPa - 515	Psi - 30000 , MPa - 205	40%

Grade	Tensile Strength	Yield Strength	Elongation	Hardness
	(MPa) min	0.2% Proof	(% in 50mm) min
		(MPa) min		Rockwell C (HR C)	Brinell (HB)
UNS S31803 / 2205	621	448	25	31 max	293 max
UNS S32205 / 2205	621	448	25	31 max	293 max

Grade	Property	Value
2507/ S32750	Density (g/cm3)	7.8
	0.2% Offset Yield Strength	80 ksi
	Ultimate Tensile Strength	116 ksi
	0.1% Offset Yield Strength 0.2%	91 ksi
	Elongation in 2 inches, %	15%
	Hardness Rockwell C	32
	Impact Energy	74 ft.-lbs
	Density	0.28 lb per inch3
	Modulus of elasticity	28 x 10(6) psi
	Coefficient of thermal expansion	7.2 x 10(-6) per of at 68 to 212 of
	Thermal conductivity	8.7 Btu/hr ftoF
	Heat capacity	0.12 Btu/ lb oF
	Electrical resistivity	31.5 x10(-6) ohm-inch

For more information on stainless steel rods, please contact Daxun

Certifications

304 304L Stainless Steel Rod
304/304L Stainless Steel Rod alloy is an upgrade from regular 304/304L that is treated for better machinability and uniformity. This alloy can be machined faster, with longer tool life, higher part quality, and a lower overall cost to machine the part. 304/304L Stainless Steel Rod is not magnetic after annealing, but may be slightly magnetic after cold working or welding.
Specifications: UNS S30400, UNS S30403

316 316L Stainless Steel Rod
Due to the increased chromium
and molybdenum content, 316L Stainless Steel Bar is generally more resistant than 304 in a range of atmospheric environments and many corrosive media. 316L Stainless Steel Bar is susceptible to pitting and crevice corrosion in warm chloride environments and stress corrosion cracking above about 122°F (50°C). It can withstand chloride levels up to about 1000mg/L in drinking water at ambient temperatures, while its chloride content drops to about 500mg/L at 140°F (60°C). 316L Stainless Steel Bar is often considered a "marine grade stainless steel" - but is not resistant to warm seawater.

321 Stainless Steel Rod
Alloy 321 Stainless Steel Bar (UNS S32100) is a titanium stabilized austenitic stainless steel with good overall corrosion resistance. It has high resistance to intergranular corrosion after exposure to chromium carbide precipitation temperature range of 800 - 1500°F (427 - 816°C). The alloy can withstand oxidation up to 1500°F (816°C) and has better creep and stress rupture properties than 304 and 304L Stainless Steel Bar. It also has good low temperature toughness.
321H Stainless Steel Bar (UNS S 32109) is a higher carbon content variation (0.04 - 0.10) of this alloy. It is designed to improve creep resistance and strength at temperatures above 1000oF (537°C). The carbon content of the plate allows dual certification in most cases.
321 Stainless Steel Bar can only be toughened by cold working, not by heat treatment. It can be easily welded and machined using conventional shop fabrication techniques.

310S Stainless Steel Rod
310S Stainless Steel Bar is an austenitic stainless steel bar that has excellent high temperature resistance characteristics while also being ductile and weldable. It is often used in high temperature applications due to its high chromium and nickel content, offering strong corrosion resistance, excellent oxidation resistance, and exceptional strength at temperatures up to 2100°F. Due to its high chromium and nickel content, 310S Stainless Steel Bar outperforms 304 or 309 stainless steel bars in most applications.


2205 Stainless Steel Rod
Duplex 2205 Stainless Steel Bar is a duplex ferritic austenitic stainless steel bar containing 22% chromium, 3% molybdenum and 5-6% nickel. It is the most commonly used duplex stainless steel grade and has a yield strength twice that of regular austenitic grades. The stainless steel bar also has excellent fatigue strength and excellent resistance to stress corrosion cracking, crevice, pitting, erosion and general corrosion in severe conditions.

2507 Stainless Steel Rod
Daxun Alloys Stainless Steels inventory currently includes Duplex 2507 Round Bar, a super duplex stainless steel bar containing 25% chromium, 4% molybdenum and 7% nickel. The alloy is suitable for applications requiring high strength and corrosion resistance, such as chemical processing, petrochemical and seawater equipment. 2507 stainless steel bar has strong resistance to chloride stress corrosion cracking, good thermal conductivity and a low coefficient of thermal expansion. The high chromium, molybdenum and nickel content provides excellent resistance to pitting, crevice corrosion and general corrosion.
 

17-4ph/630 grade stainless steel round bars

17-4ph Stainless steel round bars are widely used. They are widely used in various fields from construction to automotive parts. Due to the wide range of uses, Daxun Alloys offers stainless steel round bars in various grades and sizes. With our free advanced cutting service, we can accurately meet your requirements every time.

Wide Range of Sizes to Choose From

17-4ph Stainless steel round bars can be easily ordered in a wide range of sizes. Simply select the grade of steel you require and we will provide bars in lengths ranging from 500mm to 6 meters, and diameters ranging from 3mm to 500mm. We even give you the option of ordering in metric or imperial sizes.

 

FAQ

Can you do SS grinding bar & rod?

Yes we can do SS grinding bar & rod featuring precise dimension, roundness and straightness, superior to stainless steel polished bars, but the processing cost is also higher.

Q1: What products can you offer?

A: We can offer you general steel types like 310S, 316L,304.304L.201,904L, 316H, 316,316L 300and 
400 series, and duplex stainless steel like 2205, 2304,2101,2507,etc. 904L, 800H, 600H high-nickel alloy.

Q2. Can you produce the products according to my own drawings?

Yes, we can produce the products according to your drawings that will be most satisfy you.

Q3. How does your factory do regarding quality control?

Quality is a priority. We always attach great importance to quality controlling from the beginning to end.

Q4. Can I request to change the form of packaging and transportation?

Yes, We can change the form of the packaging and transportation according to your request, 
but you have to bear their own costs incurred during this period and the spreads.
 

Q5. How does your factory do regarding quality control?

Quality is a priority. We always attach great importance to quality controlling from the beginning to end.

Q6. How long is the delivery time?

A: 7~20 working days after confirming the payment.
If the order is urgent, we will push our workshop finish in advance.

Q7. What is your Payment? 

A:  100% T/T advance, Western Union (For Small Order) 

B:  30% T/T and balance 70% before the shipment

C:  100% Irrevocable LC at sight  (For Big Order) 

Q8: Can you make DDQ ( Deep Drawing Quality)?

A: Yes, we can. Our material can be used for stainless steel pots, stainless steel sinks, stainless steel bowls etc. U can tell us your usage, and we will adjust the mechanical propertise to meet your requirement.

Q9: How to get a sample?

A: FREE samples are available for your checking and testing.If you require for a small piece,we can afford courier cost,it depends.
 
Q10:Which country have you exported to?

A:Until now,we have exported stainless steel  material to following countries: Vietnam,Thailand,Turkey,Russia,Maroc,Korea,India,Pakistan,UAE,Ukraine and so on.

Q11: How to visit your company?

A:By flight to Guangzhou Baiyun International airport,then we will pick you up.