| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Known as the 'workhorse' of commercially pure titanium, Grade 2 Titanium Plate (UNS R50400) offers a perfect blend of high strength, ductility, and unparalleled corrosion resistance, making it indispensable for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate that strikes an excellent balance between strength and ductility. With remarkable impact strength and weldability, it also maintains superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it boasts excellent resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and stellar corrosion resistance make it an ideal material for a myriad of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions under 70°C. With an impressive melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial uses requiring superior ductility and corrosion resistance.
Grade 2 titanium plate distinguishes itself with a lower density, making it perfect for weight-sensitive situations. It is highly valued in the medical, chemical equipment, and aerospace sectors. Grade 2 titanium's strength and corrosion resistance also make it ideal for marine, chemical processing, and desalination industries. Typical applications encompass oil and gas components, reaction and pressure vessels, piping systems, power systems, heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Common standards include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
Daxun conducts rigorous quality assurance tests, including flattening tests, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, and expansion tests, ensuring the material's suitability for its intended application. Throughout production, we meticulously measure the diameter, thickness, and surface of the product. Our standard delivery time is 5-7 days, with special size products delivered within 15-20 days.
Titanium Grade 2 Plates are available in cold-rolled thicknesses from 0.3 mm to 6.0 mm and are supplied in hot-rolled or heat-treated conditions. Hot-rolled thicknesses range from 4.76 mm to 155 mm. Production involves longitudinal and transverse rolling, and plates can be provided in cut blank form, allowing for complex geometric shapes to be cut from a parent plate. Further processing is customized to the customer's requirements, which can include mechanical or chemical treatments. Creep flattening can also be employed as a heat treatment to relieve internal stresses and meet specific flatness requirements.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is the unparalleled expert in the realm of titanium plate projects, whether small-scale or monumental. As your primary reference and enduring ally, DAXUN is poised to deliver exceptional titanium plates alongside indispensable technical support tailored to your needs. Beyond being a mere supplier of industrial pure titanium plates and titanium alloy plates, DAXUN stands as your strategic confidant, dedicated to overcoming any challenges you may face. Partner with DAXUN to achieve your project ambitions with finesse and precision.
DAXUN's China-based service center is fully stocked with a wide range of titanium plate products, ensuring rapid order fulfillment. We enhance customer value through meticulous basic processing, precision water jet cutting, and efficient plate nesting solutions, thereby reducing both time and expense for our clientele.
With unwavering investment in state-of-the-art production facilities and strategic capacity agreements with our partners, DAXUN perpetually leads the industry in titanium plate quality, setting the gold standard for both the present and the future.
Reach out to DAXUN today for the most up-to-date pricing and technical insights on our titanium plates. Our team is ready to assist you in making informed, cost-effective decisions for your projects.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN stands as a premier Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Our ambition is to produce the world's highest-performance titanium alloy plates. We offer rapid worldwide delivery - ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN maintains a robust inventory of alloy titanium plates Grade 5 (UNS R56400) in thicknesses from 0.5mm to 300mm (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm and above forged). Grade 5 titanium plate (Ti-6Al-4V) is renowned for its superior strength, ductility, and outstanding resistance to corrosion and high temperatures, making it indispensable in both general and military industries. Our products comply with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate is predominantly employed in aerospace, military, power industries, vehicle armor, rocket precision guidance parts, and marine applications.
Grade 1
Today, DAXUN Alloys stands as a preeminent global producer and supplier of premium Grade 1 titanium plate.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it perfect for deep drawing. Known for its superior resistance to general and seawater corrosion, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. Titanium's low density, approximately half that of nickel-based alloys, coupled with its high strength-to-weight ratio and corrosion resistance, makes it an ideal choice for challenging chemical conditions. Commercially pure Grade 1 titanium is the most malleable and ductile, offering excellent cold formability, outstanding corrosion resistance, superb weldability, and notable impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plate, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, Suppliers of ASTM B265 Titanium Grade 1 Coil, Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Dealers of Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates, Titanium Gr 1 Perforated Plates, and Manufacturers of Titanium Grade 1 Sheets and Plates in China.
Grade 2
DAXUN specializes in producing and storing commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the cornerstone of the commercially pure titanium family, offering a blend of high strength, ductility, and outstanding corrosion resistance for various industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium plate, strikes a perfect balance between strength and ductility. It features good impact strength and is highly weldable. It offers impressive corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it excels in seawater and saline solutions.
With its low density, high strength-to-weight ratio, and excellent corrosion resistance, titanium is an ideal material for a myriad of applications. It effectively combats stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Featuring a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications requiring superior ductility and corrosion resistance.
DAXUN excels as a metal expert, adept at handling both small and large titanium plate projects. As your reliable reference point and long-term partner, DAXUN is poised to supply you with titanium plates and offer any technical assistance you require. Consider DAXUN not just your supplier of industrial pure titanium and titanium alloy plates, but your strategic partner, dedicated to helping you overcome any challenges and meet your project goals with success.
At DAXUN's premier service center in China, we maintain an extensive inventory of titanium plate products, ensuring rapid order processing to meet your urgent needs. Our suite of services, including precision water jet cutting and efficient plate nesting, adds exceptional value to every purchase, significantly reducing both time and costs for our valued customers.
With ongoing investment in our state-of-the-art production facilities and strategic capacity agreements with trusted partners, DAXUN remains a leader in the titanium plate industry. Our commitment ensures that we consistently deliver the highest quality titanium plates, today and for the foreseeable future.
Reach out to DAXUN today for the most competitive prices and comprehensive technical information on our superior titanium plates. Our dedicated team is ready to provide you with the insights and details you need to make informed purchasing decisions.
Q1: What products can you offer?
A: We offer a wide range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L 300 series.
Additionally, our catalog features 400 series and duplex stainless steels such as 2205, 2304, 2101, and 2507, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can tailor our production to your custom drawings, ensuring your utmost satisfaction.
Q3. How does your factory ensure quality control?
Quality is our top priority. We maintain stringent quality control measures from the beginning to the end of the production process.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can adapt the packaging and transportation methods to suit your requirements.
However, you will need to cover any additional costs and the price differential.
Q5. How does your factory ensure quality control?
Quality is our top priority. We maintain stringent quality control measures from the beginning to the end of the production process.
Q6. What is the delivery time?
A: The delivery time is typically 7~20 working days after payment confirmation.
For urgent orders, we expedite the process to meet your timeline.
Q7. What are your payment terms?
A: 100% T/T in advance, or Western Union for small orders.
B: 30% T/T in advance and 70% before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are perfect for stainless steel pots, sinks, bowls, etc. Just inform us of your requirements, and we will adjust the mechanical properties accordingly.
Q9: How can I get a sample?
A: FREE samples are available for your evaluation. If you need a small piece, we can cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}