| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
At DAXUN, we specialize in producing and stocking a comprehensive range of commercially pure titanium plates Gr1, Gr2, Gr3, and Gr4 (UNS), with thickness variations spanning from 0.5 mm to 120 mm. These grades of titanium plate, often heralded as the 'workhorses' in the commercially pure titanium family, offer a remarkable blend of high strength, ductility, and exceptional corrosion resistance, making them indispensable for an array of industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates are renowned for their commercial purity and impressive characteristics. They strike an optimal balance between strength and ductility, boasting excellent impact strength and weldability. Their superior corrosion resistance makes them ideal for use in highly oxidizing environments, alkaline media, brine solutions, and weakly reducing environments. Additionally, they offer outstanding resistance to seawater, wet ***, and salt solutions.
Gr5 Grade 5 Ti-6Al-4V titanium plate is a high-performance titanium alloy plate consisting of 90% titanium, 6% aluminum, and 4% vanadium. As an α-β type titanium alloy, aluminum stabilizes the α phase while vanadium stabilizes the β phase. The Gr5 Ti-6Al-4V titanium alloy plate is celebrated for its exceptional comprehensive performance and excellent processability. TC4 titanium alloy provides superior room temperature and high-temperature strength, outstanding creep resistance, and thermal stability. It excels in fatigue performance, *** growth resistance in seawater, and offers satisfactory fracture toughness and hot salt stress corrosion resistance. With its superb process plasticity and superplasticity, it is well-suited for various processing methods, welding, and machining techniques.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: These plates are meticulously produced through a sophisticated plate rolling process, with the final step being cold rolling. They are available in work-hardened or heat-treated conditions. Depending on customer specifications, further processing can involve advanced mechanical or chemical treatments, ensuring each sheet meets the highest industry standards. 2. Hot-Rolled Titanium Plate: Crafted through longitudinal or longitudinal and transverse rolling, these plates range in thickness from 3.0mm to 155mm and are provided in heat-treated conditions. If required, creep flattening is employed as heat treatment to eliminate internal stress and meet specific flatness specifications. Plates can be supplied as precisely cut blanks, accommodating complex shapes and designs. Additional processing can be tailored to meet customer demands.3. Forged Titanium Plate: Produced by forging steel ingots on a vertical hydraulic press followed by rolling, or through open die forging alone, or combined with rolling. Standard slab dimensions include thickness up to 580 mm, width up to 2000 mm, and length up to 6000 mm. The specific dimensions and weight of the forged plates are customizable and agreed upon between the manufacturer and the client, ensuring bespoke solutions for diverse needs.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Dedicated to creating the world's highest-performance titanium alloy plates, we ensure quick global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks Grade 5 (UNS R56400) titanium plates with thicknesses ranging from 0.5mm to 300mm. Plates from 0.5mm-6.0mm are cold rolled, 6.0-50mm are hot rolled, and those 50mm and above are forged. Grade 5 titanium plate (Ti-6Al-4V) is renowned for its high strength, ductility, excellent corrosion and high-temperature resistance, making it ideal for both general and military applications. Compliance with: ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate finds its primary applications in aerospace, military industries, power generation, vehicle armor, rocket precision guidance systems, and marine industry.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of top-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate excels in ductility and cold formability, making it perfect for deep drawing applications. Known for its outstanding general and seawater corrosion resistance, Grade 1 titanium resists oxidizing, neutral, and mildly reducing media, including chlorides. With its low density (approximately half that of nickel-based alloys), superior strength-to-weight ratio, and corrosion resistance, it is an excellent choice for various harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, featuring good cold formability, exceptional corrosion resistance, excellent weldability, and good impact hardness.
We are ASTM B265 Titanium Gr 1 Plate Producers, offering Titanium Gr 1 Sheets, Finished Plates, Grade 1 Coil, Pure Titanium Hot Rolled Plates, Cold Rolled Plates, ASTM B265 Gr 1 Sheets, Patterned Plates, Perforated Plates, and more. DAXUN is your trusted source for Titanium Grade 1 Sheets and Plates in China.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses from 0.5mm to 120mm. Renowned as the "workhorse" of commercially pure titanium, Grade 2 combines high strength, ductility, and excellent corrosion resistance, making it ideal for various industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium plate, offers an optimal balance of strength and ductility. It features good impact strength, easy weldability, and excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. With exceptional resistance to seawater and salt solutions, Grade 2 Titanium Plate is perfect for numerous applications.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance make it an ideal material for a wide range of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the go-to alloy for most industrial applications demanding excellent ductility and corrosion resistance.
DAXUN is a metal expert committed to both small and large titanium plate projects. As your reference point and long-term partner, DAXUN is ready to supply you with titanium plates and provide any technical assistance you need. Consider DAXUN not just a supplier of industrial pure and titanium alloy plates, but also a strategic partner dedicated to helping you overcome challenges and achieve your project goals.
DAXUN's premier service center in China proudly offers an extensive inventory of titanium plate products, poised for rapid order fulfillment. Through meticulous basic processing, advanced water jet cutting, and strategic plate nesting, we deliver unparalleled added value, significantly reducing both time and expense for our esteemed customers.
DAXUN's unwavering commitment to excellence is reflected in our continuous investment in state-of-the-art production facilities and strategic capacity agreements with our trusted partners. These initiatives ensure that DAXUN remains a leader in titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical information.
Q1: What products can you offer?
A: We offer a diverse range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and 300 series.
Additionally, our portfolio features 400 series steels, duplex stainless steels such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2: Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products tailored to your drawings, ensuring complete satisfaction.
Q3: How does your factory manage quality control?
A: Quality is our top priority. We rigorously manage quality control from the beginning to the end of the production process.
Q4: Can I request to change the form of packaging and transportation?
A: Yes, we can alter packaging and transportation as per your request,
though you will need to cover any additional costs and differences incurred during this period.
Q5: How does your factory manage quality control?
A: Quality is our top priority. We rigorously manage quality control from the beginning to the end of the production process.
Q6: How long is the delivery time?
A: Delivery time is typically between 7 to 20 working days after payment confirmation.
For urgent orders, we expedite our processes to meet your deadlines.
Q7: What are your payment terms?
A: 100% T/T in advance, or Western Union for small orders.
B: 30% T/T upfront and 70% balance before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you provide DDQ (Deep Drawing Quality) materials?
A: Yes, our materials meet DDQ standards, suitable for stainless steel pots, sinks, bowls, etc. Inform us of your specific needs, and we will adjust the mechanical properties accordingly.
Q9: How can I get a sample?
A: FREE samples are available for your inspection and testing. For small pieces, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have successfully exported our stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}