| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is proud to be a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Our mission is to create the world's highest-performance titanium alloy plates, and we ensure fast global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN manufactures and stocks Grade 5 alloy titanium plates (UNS R56400) with thicknesses ranging from 0.5mm to 300mm. Cold rolling is used for 0.5mm-6.0mm thicknesses, hot rolling for 6.0-50mm, and forging for over 50mm. Renowned as the 'workhorse' of titanium alloys, Grade 5 (Ti-6Al-4V) combines exceptional strength, ductility, and resistance to both corrosion and high temperatures. It's a top choice for many general and military industries, complying with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate consists of 90% titanium, 6% aluminum, and 4% vanadium. This α-β titanium alloy benefits from aluminum stabilizing the α phase and vanadium stabilizing the β phase. The key features of Ti-6Al-4V titanium alloy plate include exceptional comprehensive performance and excellent process performance. TC4 titanium alloy exhibits outstanding strength at both room and high temperatures, superior creep resistance, thermal stability, high fatigue performance, and *** growth resistance in seawater. It also boasts satisfactory fracture toughness and resistance to hot salt stress corrosion. Additionally, Ti-6Al-4V titanium plate offers excellent process plasticity and superplasticity, making it suitable for various processing methods and welding and machining techniques.
Ti-6Al-4V Grade 5 titanium plate is extensively utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, marine industry, and more.
Grade 5 titanium alloy plate is the most widely available of all titanium alloys. It combines high strength and toughness. The Ti-6Al-4V Grade 5 titanium alloy offers exceptional overall properties:
Ti-6AL-4V titanium plates and sheets are primarily used for parts requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), along with good ductility and lateral strength. Applications include: 1. Jet engine compressor blades, disks, rings, fuselage components such as wings, fuselages, turbine disks, doors, bulkheads, military aircraft components, heat shields, engine nozzles, landing gear doors, and superplastic forming parts. 2. Military uses include armor, guidance systems, shell casings, etc. 3. Spacecraft parts, including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment such as bicycle frames and golf clubs. 6. Other applications requiring a high strength-to-weight ratio.
At Daxun, we conduct rigorous quality assurance tests, including flattening tests, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, and expansion tests. These tests ensure the material meets the required application standards. During production, we meticulously measure the diameter, thickness, and surface of the product. Our standard delivery time is 5-7 days, with special size products delivered within 15-20 days.
Dive into the detailed chemical composition of our premier (Ti 6AL-4V) Grade 5 Titanium Sheet, known for its exceptional strength and versatility.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Explore the comprehensive chemical composition of Grade 2 Titanium Sheet, engineered for robustness and reliability in various applications.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Learn about the remarkable mechanical properties of our Grade 2 Titanium Sheet, tailored to provide consistent performance.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is your premier metal expert, specializing in both small and large-scale titanium plate projects. As your ultimate reference point and steadfast long-term partner, DAXUN is dedicated to supplying you with top-tier titanium plates along with unparalleled technical assistance. Envision DAXUN not merely as your supplier of industrial pure titanium plates and titanium alloy plates, but as your strategic ally, committed to overcoming any challenge and fulfilling every need you encounter. With DAXUN by your side, achieving your project goals becomes a seamless reality.
Our state-of-the-art service center in China ensures that DAXUN has a steady stock of titanium plate products ready for swift order processing. By leveraging advanced techniques such as water jet cutting and plate nesting, we enhance the value we offer to our customers, saving you both time and money.
Through continuous investment in our cutting-edge production facilities and strategic capacity agreements with our partners, DAXUN remains at the forefront of titanium plate quality, both now and in the future.
Reach out to DAXUN today to discover the latest pricing and technical details on our titanium plates.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN stands out as a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, committed to producing the world's highest performance titanium alloy plates. Our rapid global delivery includes ASTM B265 Grade 2 and Grade 5 Titanium Plates. We offer a wide range of alloy titanium plates, with Grade 5 (UNS R56400) thicknesses from 0.5mm to 300mm. Plates from 0.5mm-6.0mm are cold rolled, 6.0-50mm are hot rolled, and those 50mm and above are forged. Renowned as the 'workhorse' of titanium alloy materials, Grade 5 titanium plate (Ti-6Al-4V) exhibits unparalleled strength, ductility, and resistance to corrosion and high temperatures, making it a favorite across general and military industries. Compliance with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and other standards ensures superior quality.
The Ti-6Al-4V Grade 5 titanium plate is predominantly employed in aerospace, military, power industries, vehicle armor, rocket precision guidance parts, and marine sectors.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plate, celebrated for its exceptional ductility and cold formability, is perfect for deep drawing applications. Known for its superb general and seawater corrosion resistance, it thrives in oxidizing, neutral, and mildly reducing environments, including chlorides. With a low density (approximately half that of nickel-based alloys) and a high strength-to-weight ratio, Grade 1 titanium is an excellent choice for diverse and harsh chemical conditions. Commercially pure Grade 1 titanium is the most ductile and softest variety, boasting excellent weldability and impact hardness.
Top Producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, and Finished Plates. We offer Titanium Gr 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, Sheets, and Plates Manufacturers in China.
Grade 2
DAXUN specializes in the production and stocking of commercially pure titanium plates, Grade 2 (UNS R50400), with thicknesses ranging from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) combines high strength, ductility, and excellent corrosion resistance for a myriad of industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium plate, strikes a perfect balance between strength and ductility. It offers robust impact strength, easy weldability, and outstanding corrosion resistance in highly oxidizing settings, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also boasts excellent resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and remarkable corrosion resistance make it the ideal material for a broad spectrum of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With an impressive melting point of 1660°C, Grade 2 Titanium Plate serves as the alloy of choice for most industrial applications that demand excellent ductility and corrosion resistance.
DAXUN is your trusted metal expert, adept at handling small and large titanium plate projects. We are not just a supplier of industrial pure and alloy titanium plates but your strategic partner dedicated to providing technical assistance and support to help you overcome challenges and achieve your project goals.
At DAXUN, our state-of-the-art service center in China proudly maintains a comprehensive inventory of premium titanium plate products, ensuring we can swiftly process orders to meet your demands. With our expertise in basic processing, precision water jet cutting, and meticulous plate nesting, we deliver enhanced value to our customers, ultimately saving them both time and money.
Through continual investments in cutting-edge production facilities and strategic capacity agreements with our esteemed partners, DAXUN is unwavering in its commitment to leading the industry in titanium plate excellence, both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate pricing and to access our extensive technical expertise. Let us help you find the perfect solution for your titanium needs.
){kind=link}