| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN stands as the premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China. We are committed to producing the world's finest high-performance titanium alloy plates and deliver them swiftly worldwide. Our ASTM B265 Grade 2 and Grade 5 Titanium Plates range from 0.5mm to 300mm in thickness. Cold rolled plates span 0.5mm-6.0mm, hot rolled cover 6.0-50mm, and those above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is a versatile material celebrated for its robust strength, ductility, and superior resistance to corrosion and high temperatures, making it indispensable across general and military industries. It aligns with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Our Ti-6Al-4V grade 5 titanium plate is composed of 90% titanium, 6% aluminum, and 4% vanadium, forming an α-β titanium alloy where aluminum stabilizes the α phase and vanadium stabilizes the β phase. Notable for its exceptional performance characteristics, this alloy excels in both room and high-temperature strength, creep resistance, thermal stability, and fatigue resistance-especially in seawater. It offers remarkable fracture toughness and resistance to hot salt stress corrosion. Its excellent process plasticity and superplasticity make it suitable for various manufacturing and welding processes.
The Ti-6Al-4V grade 5 titanium plate finds applications in aerospace, military, power, vehicle armor, precise rocket components, and marine industries.
Grade 5 titanium alloy plate is unparalleled in commercial availability, harmonizing high strength with toughness. Ti-6Al-4V Grade 5 titanium alloy boasts comprehensive properties:
Our Ti-6AL-4V titanium plates and sheets are tailored for components requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), with notable ductility and lateral strength. Applications include: 1. Jet engine compressor blades, disks, rings, fuselage components such as wings, fuselages, turbine disks, doors, bulkheads, military aircraft and hardware heat shields, engine nozzles, landing gear doors, fuselage superplastic forming parts, etc. 2. Military applications including armor, guidance systems, and shell casings. 3. Spacecraft components like ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment, including bicycle frames and golf clubs. 6. Any use demanding a high strength-to-weight ratio.
Daxun ensures rigorous quality control through multiple tests: flattening, pitting and resistance, mechanical, hardness, material identification, and expansion. These tests confirm the material's suitability for various applications. We meticulously measure the diameter, thickness, and surface quality throughout production. Standard delivery time is 5-7 days, with special size products taking 15-20 days.
In-depth Analysis of the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheets
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Detailed Insights into the Chemical Composition of Grade 2 Titanium Sheets
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Comprehensive Analysis of the Mechanical Properties of Grade 2 Titanium Sheets
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished authority in the realm of metals, specializing in both small and large titanium plate projects. As your ultimate reference point and steadfast partner, DAXUN is dedicated to supplying you with premium titanium plates and providing comprehensive technical assistance for your business. Consider DAXUN not just a supplier of industrial pure titanium and titanium alloy plates, but a strategic ally in navigating any challenges and fulfilling your project requirements, ensuring the successful accomplishment of your goals.
DAXUN's state-of-the-art service center in China maintains a robust inventory of titanium plate products, enabling swift order processing. We enhance customer value through fundamental processing, water jet cutting, and efficient plate nesting, thereby saving both time and costs for our esteemed clients.
With continuous investments in our production facilities and strategic capacity agreements with our partners, DAXUN remains at the cutting edge of titanium plate quality, ensuring unparalleled excellence now and in the foreseeable future.
Reach out to DAXUN today to access up-to-date pricing and technical information on our titanium plate offerings.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, aims to create the world's finest high-performance titanium alloy plates. We ensure swift worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our extensive inventory includes Grade 5 (UNS R56400) alloy titanium plates with thicknesses from 0.5mm to 300mm: cold rolled (0.5mm-6.0mm), hot rolled (6.0-50mm), and forged (50mm and above). Grade 5 titanium (Ti-6Al-4V) is renowned for its high strength, ductility, exceptional corrosion and high-temperature resistance, making it a favorite in both general and military industries. It adheres to standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plates find extensive use in aerospace, military, power, vehicle armor, rocket precision guidance parts, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of top-quality Grade 1 titanium plates.
The Pure Grade 1 titanium plate is celebrated for its excellent ductility and cold formability, perfect for deep drawing applications. Grade 1 titanium boasts remarkable resistance to general and seawater corrosion, as well as resistance to oxidizing, neutral, and mildly reducing solutions, including chlorides. With its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and superior corrosion resistance, it is ideal for a myriad of harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile of its kind, offering excellent cold formability, corrosion resistance, weldability, and impact hardness.
Manufacturers of ASTM B265 Titanium Gr 1 Plates, including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled, Cold Rolled, Patterned, and Perforated Plates, based in China.
Grade 2
At DAXUN, we produce and stock commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the quintessential 'workhorse' of the commercially pure titanium family, offering a superior balance of strength, ductility, and corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate offers a remarkable blend of strength and ductility, with excellent impact strength and weldability. It resists corrosion in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***, while also exhibiting excellent resistance to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and superior corrosion resistance, titanium is indispensable for a wide range of applications. It effectively withstands stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Grade 2 Titanium Plate, with a melting point of 1660°C, is the preferred alloy for most industrial applications requiring excellent ductility and corrosion resistance.
DAXUN is your trusted expert for both small and large titanium plate projects. As a long-term partner, we are dedicated to providing top-quality titanium plates and comprehensive technical support. Consider DAXUN not just a supplier, but a strategic partner committed to helping you overcome any challenges and achieve your project goals with ease.
At DAXUN's premier service center in China, we maintain a robust inventory of titanium plate products, ready for rapid order fulfillment. By leveraging advanced processes such as basic processing, precision water jet cutting, and efficient plate nesting, we deliver unparalleled value to our customers, significantly saving them both time and costs.
DAXUN's unwavering commitment to continuous investment in our state-of-the-art production facilities and strategic capacity agreements with trusted partners ensures that we remain at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to secure the most competitive prices and the latest technical insights on our titanium plate offerings.
){kind=link}