| Customization: | Available |
|---|---|
| Type: | Stainless Steel Bars |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Parameters: Stainless Steel rod | |
| Material | 410 |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. | |
| Under Third Party Inspection | |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Discover an extensive range of ASTM A479 AISI 410 Stainless Steel Round Bars, including ASTM A479 SS 410 Square Bars, 410 Stainless Steel Flat Bars, and 410 Stainless Steel Rods. Our offerings feature SS DIN 1.4006 Round Bars and SS 410 Round Bars, sourced from leading manufacturers. Buy Stainless Steel 410 Bright Bars, 410 SS Polished Bars, and SS 410 Rods from top suppliers. As premier AISI SS 410 Round Bar producers in China, we guarantee superior quality and performance.
For further information on stainless steel rods, please contact Daxun.
410 Stainless Steel Rod Chemical Composition
| UNS No | S41000 |
| EN | 1.4006 |
| AISI | 410 |
| Carbon (C) | 0.08/0.15 |
| Silicon (Si) | 1 |
| Manganese (Mn) | 1 |
| Phosphorus (P) | 0.04 |
| *** (S) | 0.03 |
| Chromium (Cr) | 11.5/13.5 |
| Molybdenum (Mo) | |
| Nickel (Ni) | 0.75 |
| Property | Value |
| Density | 7.8 g/cc |
| Yield Strength | 1,225 MPa at a strain of 0.2% |
| Ultimate Tensile Strength | 1,525 MPa |
| Hardness | 126-192 Brinell hardness (annealed condition) 201-255 Brinell hardness (when hardened and tempered) |
| Bulk Modulus | 200 GPa |
| Melting Point | 1,480-1,530 °C |
| Corrosion Resistance | Good corrosion resistance in mild atmospheric environments, water, and some mild chemical environments. It shows pitting corrosion and brown staining in salt water conditions and offers lower resistance to acidic environments than the austenitic stainless steel alternatives. |
| Magnetism | Permeability 700-1,000. Highly responsive to magnetic fields, act as a strong magnetic flux carrier due to its martensitic structure. |
| Density (lb./ in^2) @ RT | 0.28 | |
| Modulus of Elasticity in Tension (psi x 10^6) | 29 | |
| Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.11 |
| Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 14.4 |
| 932oF | 16.6 | |
| Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 5.5 |
| 32 to 1,200oF | 6.5 | |
| Electrical Resistivity (micro ohms - cm) | at 70oF | 22.5 |
Our forming capabilities include state-of-the-art radial forging machines, advanced heat treatment furnaces, cutting-edge melting furnaces, and high-precision rolling mills. Additionally, we employ a unique hydroforming process for the manufacture of specialized parts.
Our stainless steel rod heat treatment utilizes advanced furnace equipment, ensuring the material's stability and superior performance.
Daxun Stainless Steel leverages the world's most advanced vacuum induction furnaces, vacuum consumable furnaces, and electroslag furnaces. This technology minimizes impurities during smelting, significantly enhancing the performance of our finished stainless steel rods.
Our premium stainless steel products come fully certified and entirely traceable. We pride ourselves on supplying only the highest quality stainless steel to a diverse range of leading industries, including aerospace, industrial manufacturing, medical, marine, and military sectors.
| Tensile Strength | Yield Strength | |||||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. | |||||
| Grade | Tensile Str | Yield Str | Elong | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell B (HR B) max | Brinell (HB) max | |||
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| Tensile Strength | Yield Strength | ||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell C (HR C) | Brinell (HB) | |||
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
| 2507/ S32750 |
Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi | |
| Ultimate Tensile Strength | 116 ksi | |
| 0.1% Offset Yield Strength 0.2% | 91 ksi | |
| Elongation in 2 inches, % | 15% | |
| Hardness Rockwell C | 32 | |
| Impact Energy | 74 ft.-lbs | |
| Density | 0.28 lb per inch3 | |
| Modulus of elasticity | 28 x 10(6) psi | |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of | |
| Thermal conductivity | 8.7 Btu/hr ftoF | |
| Heat capacity | 0.12 Btu/ lb oF | |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
APPLICATIONS:
CORROSION RESISTANCE:
Features:
Available Stock Sizes:
Explore our specific product pages for unique size offerings. Reach out to us for a quote on any custom size requirements.
410 stainless steel round bars enjoy widespread use across diverse sectors, from construction to automotive parts. To cater to this broad spectrum of applications, Daxun Alloys provides these bars in a variety of grades and sizes. Leveraging our advanced cutting services, we consistently deliver precision-tailored solutions to meet your exact specifications.
Q: Can you provide SS grinding bars & rods?
A: Absolutely. We specialize in SS grinding bars & rods that boast precise dimensions, exceptional roundness, and perfect straightness. These are superior to stainless steel polished bars, though they do come with a higher processing cost.
Q1: What products can you offer?
A: We offer a comprehensive range of steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series,
400 series, and duplex stainless steels such as 2205, 2304, 2101, 2507, etc. We also provide high-nickel alloys like 904L, 800H, 600H.
Q2: Can you produce products according to my drawings?
A: Yes, we can manufacture products based on your drawings to meet your highest satisfaction.
Q3: How does your factory ensure quality control?
A: Quality is our top priority. We maintain strict quality control measures from the initial stages to the final product.
Q4: Can I request changes to packaging and transportation?
A: Yes, we can alter the packaging and transportation methods per your request.
However, you will need to cover any additional costs and differences incurred during this period.
Q5: How does your factory ensure quality control?
A: Quality is our top priority. We maintain strict quality control measures from the initial stages to the final product.
Q6: What is the delivery time?
A: Delivery takes 7 to 20 working days after payment confirmation.
If the order is urgent, we can expedite processing in our workshop.
Q7: What are your payment terms?
A: 100% T/T in advance, Western Union (for small orders)
B: 30% T/T in advance and 70% balance before shipment
C: 100% Irrevocable LC at sight (for large orders)
Q8: Can you produce Deep Drawing Quality (DDQ) material?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Inform us of your requirements, and we will adjust the mechanical properties accordingly.
Q9: How can I obtain a sample?
A: FREE samples are available for your inspection and testing. For small pieces, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
){kind=link}