| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global manufacturer and supplier of top-tier Grade 1 titanium plates.
Pure Grade 1 titanium plates are celebrated for their exceptional ductility and cold formability, making them ideal for deep drawing applications. This grade is renowned for its outstanding resistance to general and seawater corrosion, as well as its resilience against oxidizing, neutral, and mildly reducing solutions, including chlorides. With a low density-approximately half that of nickel-based alloys-a high strength-to-weight ratio, and impressive corrosion resistance, Grade 1 titanium is the preferred choice for a multitude of challenging chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile variant, offering excellent cold formability, superb corrosion resistance, outstanding weldability, and notable impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Suppliers of Titanium Gr 1 Sheets, Manufacturers of Titanium Gr 1 Finished Plates, Distributors of ASTM B265 Titanium Grade 1 Coils, Providers of Pure Titanium Gr 1 Hot Rolled Plates, Suppliers of Titanium Gr 1 Cold Rolled Plates, Dealers of Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates, Vendors of Titanium Gr 1 Perforated Plates, and Manufacturers of Titanium Grade 1 Sheets and Plates in China.
Our commitment to timely and rapid delivery of Grade 1 titanium plate products is backed by a robust system encompassing production capacity, information flow, logistics, and capital flow. For instance, in terms of information flow, Daxun's order data is seamlessly integrated with the logistics system in real-time. On the logistics front, our processing center's strategic location near highways, rivers, and seas ensures efficient scheduling, prompt response, coordinated storage and transportation, and effective loading, guaranteeing the completion of tasks within the stipulated timeframe.
Grade 1 titanium plates, with their lower density and superior ductility, are perfect for industries that prioritize weight sensitivity and deep drawing processes. Key sectors utilizing titanium alloys include medical, chemical equipment, and aerospace industries. The strength and corrosion resistance of Grade 1 titanium plates make them ideal for marine, chemical processing, and desalination applications. Typical uses of Grade 1 titanium alloys encompass oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, flue gas desulfurization systems, and various industrial components. Common standards include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
The cold rolled thickness range for Grade 1 Titanium Plates spans from 0.3 mm to 6.0 mm, while the hot rolled thickness range extends from 4.76 mm to 155 mm. These plates are produced through both longitudinal and transverse rolling and are available in hot rolled or heat-treated conditions. If necessary, creep flattening can be employed as a heat treatment to relieve internal stresses and meet specific flatness requirements. The plates can be supplied in the form of cut blanks-parts with intricate shapes cut from a parent plate. Subsequent processing may be mechanical or chemical, depending on the customer's specifications.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert specializing in both small and large titanium plate projects. As your reliable reference point and committed long-term partner, DAXUN is here to support your business with high-quality titanium plates and comprehensive technical assistance. Beyond being an industrial pure titanium plate and titanium alloy plate supplier, DAXUN serves as a strategic ally, helping you navigate challenges and fulfill your project aspirations.
DAXUN's service center in China boasts a ready stock of titanium plate products, ensuring swift order processing. Our offerings include basic processing, water jet cutting, and plate nesting products, which add significant value for our customers by saving them both time and costs.
With continuous investment in our production facilities and strategic capacity agreements with partners, DAXUN remains at the cutting edge of titanium plate quality, both now and in the future.
Reach out to DAXUN today for the most current titanium plate prices and comprehensive technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti-6AL-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Our mission is to create the world's highest performance titanium alloy plates. We offer rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks an extensive range of alloy titanium plates, Grade 5 (UNS R56400), with thicknesses spanning from 0.5mm to 300mm. Plates from 0.5mm-6.0mm are cold rolled, those from 6.0-50mm are hot rolled, and those 50mm and above are forged. The Grade 5 titanium plate (Ti-6Al-4V), renowned as the 'workhorse' of titanium materials, boasts high strength, excellent ductility, superb corrosion resistance, and remarkable high-temperature tolerance, making it invaluable to both general and military industries. Compliant with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 titanium plates are predominantly utilized in aerospace, military, power industries, vehicle armor, rocket precision guidance components, and marine applications.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plates exhibit outstanding ductility and cold formability, making them ideal for deep drawing applications. Known for exceptional general and seawater corrosion resistance, Grade 1 titanium also withstands oxidizing, neutral, and mildly reducing media, including chlorides. With a low density-approximately half that of nickel-based alloys-high strength-to-weight ratio, and robust corrosion resistance, Grade 1 titanium is an excellent choice for diverse harsh chemical environments. The commercially pure Grade 1 titanium is the softest and most ductile, offering excellent weldability and impact hardness.
We are leading producers of ASTM B265 Titanium Grade 1 Plates and Sheets. Our offerings include Titanium Grade 1 Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. We supply high-quality titanium products to clients worldwide as one of the top manufacturers in China.
Grade 2
DAXUN proudly produces and maintains an inventory of commercially pure titanium plates, Grade 2 (UNS R50400), available in thicknesses ranging from 0.5mm to 120mm. The Grade 2 Titanium Plate (UNS R50400) stands as the 'workhorse' in the commercially pure titanium family. It merges high strength, superb ductility, and excellent corrosion resistance, making it suitable for a variety of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering an exceptional balance between strength and ductility. It boasts good impact strength, is easily weldable, and offers excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its exceptional seawater and salt solution resistance makes it a versatile choice.
With titanium's low density, high strength-to-weight ratio, and excellent corrosion resistance, it stands as an ideal material for a multitude of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. The Grade 2 Titanium Plate, with a melting point of 1660°C, is the alloy of choice for industrial applications demanding good ductility and robust corrosion resistance.
DAXUN is a metal expert dedicated to both small and large titanium plate projects. We are your reliable partner, ready to supply titanium plates and offer any necessary technical assistance. Consider DAXUN not only as your provider of industrial pure and alloy titanium plates but also as your strategic partner, committed to helping you overcome challenges and achieve project success.
DAXUN's premier service center in China boasts an extensive stock of titanium plate products, ready for swift order processing. With our advanced basic processing techniques, precision water jet cutting, and efficient plate nesting services, we deliver unparalleled added value, significantly saving our customers both time and costs.
DAXUN's unwavering commitment to continuous investment in our state-of-the-art production facilities, along with strategic capacity agreements with our esteemed partners, ensures that we consistently lead the industry in titanium plate quality, both today and in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical information available.
Q1: What products can you offer?
A: We proudly offer a diverse range of general steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L.
Additionally, we provide an extensive selection of 400 series and duplex stainless steel including 2205, 2304, 2101, 2507, among others, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Yes, we can meticulously craft products based on your detailed drawings to ensure they meet your utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain rigorous quality control measures from the initial stages to final production.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods as per your specifications.
Please note that any additional costs incurred during this process will be your responsibility.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain rigorous quality control measures from the initial stages to final production.
Q6. How long is the delivery time?
A: Our standard delivery time is 7~20 working days after payment confirmation.
For urgent orders, we expedite the process to ensure timely completion.
Q7. What is your Payment?
A: 100% T/T in advance, Western Union for smaller orders.
B: 30% T/T upfront with the remaining 70% before shipment.
C: 100% Irrevocable LC at sight for larger orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we specialize in producing materials suitable for stainless steel pots, sinks, bowls, etc. Please inform us of your specific application, and we will tailor the mechanical properties to meet your needs.
Q9: How to get a sample?
A: We offer FREE samples for your evaluation and testing. For small pieces, we may also cover the courier cost depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have successfully exported our stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How to visit your company?
A: You can fly to Guangzhou Baiyun International Airport, where we will personally pick you up for your visit.
){kind=link}