Customization: | Available |
---|---|
Type: | Stainless Steel Bars |
Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Parameters: Stainless Steel rod | |
Material | 17-4PH 630 Precipitation Hardened Steel Bars |
Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round Bars | Outside Diameter in the range of 4mm to 500mm |
Bright Bars | Outside Diameter in the range of 4mm to 100mm |
Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Length | 1 to 6 Meters, Custom Cut Lengths |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
Laboratory Test Certificate from Govt. Approved Lab. | |
Under Third Party Inspection | |
Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Daxun is a distinguished global manufacturer specializing in SS 17-4PH/630 Round Bar/Rod range. As a trusted supplier, exporter, and reputable distributor, we provide high-quality bars and rods that meet the stringent demands of various industries.
We cater to our customers' needs by offering bars and rods in a variety of parameters including surface treatment, end finish, dimensions, shapes, and sizes, ensuring a perfect fit for every application.
SS 17-4PH is a martensitic stainless steel that gains its hardness through precipitation. This exceptional alloy incorporates nickel, copper, and chromium, making it a preferred choice in the aerospace sector for fasteners and structural components. Classified as UNS S17400, its microstructure is refined during the remelting process, enhancing its toughness and reliability.
Stainless steel 17-4 PH Round Bar is highly esteemed in the manufacturing and engineering sectors due to its superior corrosion resistance, high strength, and producibility. The 'PH' denotes precipitation hardening, a sophisticated heat treatment that significantly optimizes the material's mechanical properties.
For comprehensive information on stainless steel rods, please contact Daxun.
17-4PH Stainless Steel Rod Chemical Composition
Carbon | 0.07% (Max) |
Silicon | 1.00% (Max) |
Manganese | 1.00% (Max) |
Phosphorous | 0.040% (Max) |
Sulfur | 0.030% (Max) |
Chromium | 15%-17.5% |
Molybdenum | 0.50% (Max) |
Nickel | 3%-5% |
Copper | 3%-5% |
Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
17-4 PH | H900 | 190,000 | 170,000 | 10 | 40 | 388 | C40 |
H1025 | 155,000 | 145,000 | 12 | 45 | 331 | C35 | |
H1075 | 145,000 | 125,000 | 13 | 45 | 311 | C32 | |
H1150 | 135,000 | 105,000 | 16 | 50 | 277 | C28 | |
H1150-M | 115,000 | 75,000 | 18 | 55 | 255 | C24 | |
H1150-D | 125,000 | 105,000 | 16 | 50 | 255 min - 311 max | C24 - 33 |
Heat Treated Condition | H900 |
Density, lbs/in3 | 0.282 |
Electrical Resistivity, microhm-cm | 77 |
Specific Heat, BTU/lb/°F (32-212°F) | 0.1 |
Thermal Conductivity, BTU/hr/ft2/in/°F | |
300°F | 124 |
500°F | 135 |
860°F | 156 |
900°F | 157 |
Mean Coefficient of Thermal Expansion, in/in/°F | |
-100 to 70°F | 5.8 x 10^-6 |
70 - 200°F | 6.0 x 10^-6 |
70 - 400°F | 6.0 x 10^-6 |
70 - 600°F | 6.3 x 10^-6 |
70 - 800°F | 6.5 x 10^-6 |
70 - 900°F | - |
Modulus of Elasticity, ksi | 28.5 x 10^3 |
Modulus of Rigidity, ksi | 11.2 x 10^3 |
Poisson's Ratio (all conditions) | 0.272 |
With state-of-the-art radial forging machines, heat treatment and melting furnaces, and rolling mills, Daxun excels in manufacturing titanium rods. Additionally, our unique hydroforming process sets us apart in producing highly precise parts.
Our stainless steel rod heat treatment is conducted using cutting-edge furnace equipment, meticulously designed to guarantee the utmost stability and exceptional performance of the material.
At Daxun Stainless Steel, we employ the world's most sophisticated vacuum induction furnace, vacuum consumable furnace, and electroslag furnace. These state-of-the-art technologies significantly minimize impurities during the smelting process, thereby enhancing the overall performance and integrity of our stainless steel rods.
Our stainless steel products are not just certified; they are the epitome of excellence, fully traceable to ensure the utmost quality. We proudly supply top-tier stainless steel to prestigious industries such as aerospace, industrial, medical, marine, and military sectors, meeting their most stringent demands.
Tensile Strength | Yield Strength | |||||||||||
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. | |||||
Grade | Tensile Str | Yield Str | Elong | Hardness | |
(MPa) min | 0.2% Proof | (% in 50mm) min | |||
(MPa) min | Rockwell B (HR B) max | Brinell (HB) max | |||
316 | 515 | 205 | 40 | 95 | 217 |
316L | 485 | 170 | 40 | 95 | 217 |
316H | 515 | 205 | 40 | 95 | 217 |
Tensile Strength | Yield Strength | ||||||||
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
(MPa) min | 0.2% Proof | (% in 50mm) min | |||
(MPa) min | Rockwell C (HR C) | Brinell (HB) | |||
UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
Grade | Property | Value |
2507/ S32750 |
Density (g/cm3) | 7.8 |
0.2% Offset Yield Strength | 80 ksi | |
Ultimate Tensile Strength | 116 ksi | |
0.1% Offset Yield Strength 0.2% | 91 ksi | |
Elongation in 2 inches, % | 15% | |
Hardness Rockwell C | 32 | |
Impact Energy | 74 ft.-lbs | |
Density | 0.28 lb per inch3 | |
Modulus of elasticity | 28 x 10(6) psi | |
Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of | |
Thermal conductivity | 8.7 Btu/hr ftoF | |
Heat capacity | 0.12 Btu/ lb oF | |
Electrical resistivity | 31.5 x10(-6) ohm-inch |
17-4ph Stainless steel round bars are versatile and widely used across various sectors, from construction to automotive parts. Daxun Alloys provides these bars in numerous grades and sizes. Our advanced free cutting service ensures precise fulfillment of your specifications every time.
Do you offer stainless steel grinding bars and rods?
Absolutely. We provide stainless steel grinding bars and rods with impeccable precision in dimension, roundness, and straightness, surpassing the quality of polished bars. However, please note that the processing cost is comparatively higher.
Q1: What products can you offer?
A: We offer a broad range of steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and the 300 series.
Additionally, we provide 400 series and duplex stainless steels such as 2205, 2304, 2101, 2507, among others. We also supply high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we are capable of manufacturing products according to your drawings to meet your utmost satisfaction.
Q3. How does your factory manage quality control?
Quality is our top priority. We consistently maintain rigorous quality control measures from the very beginning to the final stages of production.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can modify the packaging and transportation methods according to your requirements.
However, you will need to bear any additional costs incurred during this process.
Q5. How does your factory manage quality control?
Quality is our top priority. We consistently maintain rigorous quality control measures from the very beginning to the final stages of production.
Q6. How long is the delivery time?
A: Typically, it takes 7 to 20 working days after payment confirmation.
For urgent orders, we expedite our processes to ensure early completion.
Q7. What are your payment terms?
A: 100% T/T in advance or Western Union (for smaller orders).
B: 30% T/T upfront and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight (for larger orders).
Q8: Can you provide Deep Drawing Quality (DDQ)?
A: Yes, we can. Our materials are suitable for making stainless steel pots, sinks, bowls, etc. Let us know your application, and we'll adjust the mechanical properties to meet your needs.
Q9: How can I get a sample?
A: FREE samples are available for your evaluation. For small pieces, we may cover the courier costs depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported our stainless steel materials to numerous countries, including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many others.