| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN expertly produces and maintains an extensive inventory of commercially pure titanium plates in grades Gr1, Gr2, Gr3, and Gr4 (UNS), with thicknesses ranging from 0.5 mm to 120 mm. These titanium plates are renowned as the "workhorses" of the commercially pure titanium family, offering a blend of high strength, excellent ductility, and superior corrosion resistance, making them ideal for numerous industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates are known for their commercially pure composition, delivering an outstanding balance of strength and ductility. These plates feature excellent impact strength, ease of welding, and impressive corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, they offer exceptional resistance to seawater and salt solutions.
Gr5 grade 5 Ti-6Al-4V titanium alloy plate is composed of 90% titanium, 6% aluminum, and 4% vanadium. This α-β type titanium alloy benefits from aluminum's role in stabilizing the α phase and vanadium's role in stabilizing the β phase. The Gr5 Ti-6Al-4V titanium alloy plate boasts excellent comprehensive performance, outstanding process capabilities, and superior strength at both room and high temperatures. Its noteworthy attributes include excellent creep resistance, thermal stability, high fatigue performance, and resistance to *** growth in seawater. The alloy also demonstrates satisfactory fracture toughness, hot salt stress corrosion performance, and exceptional process plasticity and superplasticity, making it suitable for various processing, welding, and machining methods.
About the chemical composition of (Ti-6Al-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: Cold-rolled titanium plates are meticulously crafted through a precise plate rolling process, where the final rolling step is conducted under cold conditions. These sheets are available in either a work-hardened or heat-treated state, allowing for versatile applications. Depending entirely on customer specifications, additional mechanical or chemical processing can be skillfully performed to meet exact needs. 2. Hot-Rolled Titanium Plate: Expertly produced using both longitudinal and cross-rolling methods, our hot-rolled titanium plates boast impressive thicknesses ranging from 3.0mm to 155mm. Delivered in a heat-treated condition, these plates can undergo creep flattening to eliminate internal stress and achieve unique flatness standards if required. Available as cut blanks, these complex-shaped parts can be intricately cut from the parent metal and further processed according to customer requirements.3. Forged Titanium Plate: Our forged titanium plates are produced through a sophisticated method involving the forging of steel ingots using a vertical hydraulic press, followed by precise rolling. Alternatively, open die forging or a combination of open die forging and rolling may be employed. Standard slab dimensions include thicknesses up to 580 mm, widths up to 2000 mm, and lengths up to 6000 mm. Both dimensions and weight are customizable, agreed upon between the manufacturer and the customer to ensure the perfect fit for your requirements.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN stands as a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 alloy titanium plates from China! Our mission is to produce the world's highest-performance titanium alloy plates. We offer rapid global delivery for ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we produce and maintain a robust inventory of alloy titanium plates in Grade 5 (UNS R56400) with thicknesses ranging from 0.5mm to 300mm. Plates from 0.5mm to 6.0mm are cold rolled, 6.0mm to 50mm are hot rolled, and those above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is the quintessential titanium alloy, merging remarkable strength, ductility, superb corrosion resistance, and high-temperature endurance. It is highly esteemed across general and military industries. Our products comply with numerous standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate finds extensive applications in aerospace, military sectors, power industries, vehicle armor, rocket precision guidance components, marine industries, and beyond.
Grade 1
Today, DAXUN Alloys emerges as a leading global titan in the production and supply of top-tier Grade 1 titanium plates.
Pure Grade 1 titanium plates boast exceptional ductility and cold formability, making them perfect for deep drawing. Renowned for their stellar general and seawater corrosion resistance, Grade 1 titanium shows resilience against oxidizing, neutral, and mildly reducing environments, including chlorides. Thanks to titanium's low density (approximately half that of nickel-based alloys), its high strength-to-weight ratio, and its corrosion resistance, Grade 1 titanium is an ideal choice for a variety of challenging chemical conditions. As the softest and most ductile commercial grade, Grade 1 titanium offers excellent cold formability, outstanding corrosion resistance, superb weldability, and commendable impact hardness.
We are proud producers of ASTM B265 Titanium Gr 1 Plates. Our range includes Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. As leading manufacturers in China, we provide high-quality Titanium Grade 1 Sheets and Plates, meeting all your industrial needs.
Grade 2
At DAXUN, we manufacture and stock commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the backbone of the commercially pure titanium family, combining robust strength, ductility, and exceptional corrosion resistance for a wide array of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate offering an exceptional balance between strength and ductility. It delivers excellent impact strength, is readily weldable, and offers outstanding corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it provides excellent resistance to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and excellent corrosion resistance, titanium is an ideal material for a multitude of applications. It effectively withstands stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications requiring superior ductility and corrosion resistance.
At DAXUN, we are experts in tackling both small and large titanium plate projects. As your reliable partner, we are dedicated to providing top-tier titanium plates and comprehensive technical assistance to help your business thrive. Consider DAXUN not just as a supplier of industrial pure titanium plates and titanium alloy plates, but as your strategic ally in overcoming any challenges and fulfilling your project aspirations.
Jiangsu Daxun Alloy Co., Ltd. proudly offers a state-of-the-art service center in China, stocked with premium titanium plate products, ensuring rapid order processing. Our comprehensive range of services, including basic processing, water jet cutting, and plate nesting, delivers exceptional value, optimizing both time and cost savings for our esteemed customers.
With unwavering commitment to excellence, Jiangsu Daxun Alloy Co., Ltd. continuously invests in cutting-edge production facilities and forges strategic capacity agreements with trusted partners. This dedication ensures that we consistently lead the industry in titanium plate quality, both now and in the foreseeable future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today for the most competitive pricing and detailed technical information on our top-tier titanium plate products.
Q1: What products can you offer?
A: We provide a diverse range of general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L. We also specialize in 300 and 400 series steels, as well as duplex stainless steels such as 2205, 2304, 2101, 2507. Additionally, we offer high-nickel alloys like 904L, 800H, and 600H.
400 series, and duplex stainless steel like 2205, 2304, 2101, 2507, etc. 904L, 800H, 600H high-nickel alloy.
Q2. Can you produce the products according to my own drawings?
Yes, we can expertly craft products based on your drawings to ensure maximum satisfaction.
Q3. How does your factory do regarding quality control?
Quality is our utmost priority. We consistently emphasize stringent quality control from start to finish.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can adjust the packaging and transportation forms as per your request,
but you will be responsible for any additional costs and differences incurred during this period.
Q5. How does your factory do regarding quality control?
Quality is a priority. We always attach great importance to quality controlling from the beginning to end.
Q6. How long is the delivery time?
A: Our standard delivery time is 7 to 20 working days after confirming the payment.
If the order is urgent, we will expedite the process to complete it ahead of schedule.
Q7. What is your Payment?
A: 100% T/T advance, Western Union (For Small Orders).
B: 30% T/T upfront and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight (For Large Orders).
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Share your specific usage, and we will adjust the mechanical properties to meet your requirements.
Q9: How to get a sample?
A: FREE samples are available for your evaluation and testing. If you need a small piece, we can cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How to visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}