| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN proudly produces and stocks Grade 2 Titanium Plates (UNS R50400) with thicknesses ranging from 0.5mm to 120mm. Known as the "workhorse" of the commercially pure titanium family, Grade 2 combines exceptional strength, ductility, and superior corrosion resistance, making it ideal for a multitude of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering a remarkable balance of strength and ductility. It boasts excellent impact strength and weldability, along with superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing conditions, and wet ***. Its exceptional resistance to seawater and salt solutions further underscores its versatility.
With its low density, high strength-to-weight ratio, and outstanding corrosion resistance, titanium is the material of choice for a broad spectrum of applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is ideal for industrial applications demanding excellent ductility and corrosion resistance.
Grade 2 titanium plate's lower density makes it perfect for weight-sensitive applications. Key industries include medical, chemical equipment, and aerospace. Its strength and corrosion resistance make it indispensable for marine, chemical processing, and desalination. Typical applications include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and various industrial components. Compliance with standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
At Daxun, we uphold rigorous quality assurance protocols, including flattening, pitting, resistance, mechanical, hardness, and material positive identification tests, along with expansion tests. These comprehensive evaluations ensure our materials meet stringent application requirements. Throughout production, we meticulously measure diameter, thickness, and surface quality. Our standard delivery time is 5-7 days, extending to 15-20 days for special sizes.
Titanium Grade 2 Plates are available in cold rolled thicknesses from 0.3 mm to 6.0 mm and in hot rolled or heat treated conditions from 4.76 mm to 155 mm. These plates are produced by longitudinal and transverse rolling and can undergo creep flattening as a heat treatment to relieve internal stresses and meet specific flatness requirements. Plates can be supplied as cut blanks, with mechanical or chemical further processing available based on customer requirements.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is your premier metal expert, specializing in both small and large-scale titanium plate projects. As your dedicated reference point and long-term partner, DAXUN is fully equipped to supply your business with top-quality titanium plates and comprehensive technical support. Consider DAXUN not merely as a supplier of industrial pure titanium and titanium alloy plates, but as your strategic ally in overcoming challenges and fulfilling your project objectives with unparalleled success.
DAXUN's state-of-the-art service center in China ensures rapid order fulfillment with an extensive inventory of titanium plate products. Our value-added offerings, including basic processing, precise water jet cutting, and efficient plate nesting, are designed to save you both time and costs, enhancing your overall operational efficiency.
Through continuous investment in our production facilities and strategic capacity agreements with partners, DAXUN remains at the pinnacle of titanium plate quality, both now and in the future. Our commitment to excellence ensures that we consistently deliver superior products that meet the highest industry standards.
Reach out to DAXUN today to access the most competitive titanium plate prices and detailed technical information. Our team is ready to assist you in every step of your titanium procurement process.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, renowned as a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, is committed to crafting exceptional high-performance titanium alloy plates. Our expansive inventory includes ASTM B265 Grade 2 and Grade 5 Titanium Plates, available for rapid global delivery. Our titanium plates, precisely ranging from 0.5mm to 300mm in thickness, cater to diverse industrial needs. Cold-rolled titanium plates (0.5mm-6.0mm) and hot-rolled plates (6.0mm-50mm) ensure robustness, whereas forged plates (50mm and above) provide unmatched durability. Grade 5 titanium plate (Ti-6Al-4V) is revered for its exceptional amalgamation of high strength, ductility, and corrosion resistance, making it indispensable across both general and military applications. Our products adhere to stringent international standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 titanium plate is predominantly applied within aerospace, military sectors, power industry, vehicle armor manufacturing, rocket precision guidance systems, and maritime domains.
Grade 1
DAXUN Alloys stands as a distinguished global entity, renowned for its superior quality production and supply of Grade 1 titanium plates.
Grade 1 titanium plate, celebrated for its exceptional ductility and cold formability, is especially suitable for deep drawing applications. Exhibiting excellent general and seawater corrosion resistance, Grade 1 titanium withstands oxidizing, neutral, and mildly reducing media, including chloride solutions. Its low density, approximately half that of nickel-based alloys, coupled with an excellent strength-to-weight ratio, makes it an optimal choice for challenging chemical environments. Commercially pure Grade 1 titanium, known for its softness and ductility, also boasts excellent cold formability, corrosion resistance, weldability, and impact hardness.
We proudly supply ASTM B265 Titanium Gr 1 Plates and Sheets, offering a range of products including finished plates, coils, hot and cold rolled plates, patterned and perforated plates. As leading manufacturers in China, we ensure high-quality Pure Titanium Gr 1 Plates and Sheets that meet diverse application requirements.
Grade 2
DAXUN offers an extensive range of commercially pure titanium plates Grade 2 (UNS R50400), with thicknesses spanning from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) provides an optimal balance of high strength, ductility, and corrosion resistance for various industrial applications.
Grade 2 Titanium Plate is distinguished by its commercial purity and exceptional balance between strength and ductility. It offers high impact strength, excellent weldability, and superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its resistance to seawater and salt solutions further underscores its robust applicability.
With a melting point of 1660°C, Grade 2 Titanium Plate is a preferred choice for a plethora of industrial applications demanding excellent ductility and formidable corrosion resistance. Titanium's intrinsic low density, coupled with a high strength-to-weight ratio, ensures resilience against stress corrosion cracking, pitting, and crevice corrosion in chloride solutions at temperatures below 70°C.
DAXUN is an esteemed metal expert, adept at managing both small and large-scale titanium plate ventures. As a trusted reference point and strategic partner, DAXUN is poised to provide you with high-quality titanium plates and comprehensive technical support. Consider DAXUN not just a supplier of industrial pure titanium plates and alloys but a pivotal ally in overcoming your project's challenges and achieving your objectives.
At DAXUN's premier service center in China, we maintain a ready stock of titanium plate products to ensure swift order processing. By utilizing state-of-the-art techniques such as basic processing, precision water jet cutting, and innovative plate nesting, we deliver unparalleled value to our customers, significantly reducing both time and costs.
With continuous investment in cutting-edge production facilities and strategic capacity agreements with our trusted partners, DAXUN ensures we remain at the pinnacle of titanium plate quality, both today and in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical information.
Q1: What products can you offer?
A: We offer a wide variety of steel products including general steels such as 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L. We also provide 300 and
400 series, duplex stainless steels including 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H to meet diverse requirements.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products precisely according to your drawings to ensure they meet your specifications and satisfaction.
Q3. How does your factory handle quality control?
A: Quality is our utmost priority. We maintain stringent quality control measures from the very beginning of production to the final inspection.
Q4. Can I request changes to the packaging and transportation methods?
A: Yes, we can customize the packaging and transportation methods to meet your requirements,
though please note you will need to cover any additional costs and expenses incurred.
Q5. How does your factory handle quality control?
A: Quality is our utmost priority. We maintain stringent quality control measures from the very beginning of production to the final inspection.
Q6. How long is the delivery time?
A: The delivery time typically ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite the production process to meet your deadlines.
Q7. What are your payment terms?
A: We offer flexible payment options including 100% T/T in advance, Western Union for small orders,
30% T/T deposit with the remaining 70% before shipment, and 100% Irrevocable LC at sight for large orders.
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we specialize in DDQ materials suitable for manufacturing stainless steel pots, sinks, bowls, and more. Simply inform us of your specific usage, and we will tailor the mechanical properties to meet your needs.
Q9: How can I obtain a sample?
A: We provide FREE samples for your evaluation and testing. For small sample pieces, we may cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: We have successfully exported our stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up upon your arrival.
){kind=link}