| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN proudly stands as a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to produce the world's highest-performance titanium alloy plates, with swift global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we manufacture and stock Grade 5 (UNS R56400) alloy titanium plates in thicknesses ranging from 0.5mm to 300mm. Plates from 0.5mm-6.0mm are cold rolled, those from 6.0mm-50mm are hot rolled, and those above 50mm are forged. As the workhorse of titanium alloys, Grade 5 titanium plate (Ti-6Al-4V) offers remarkable strength, ductility, excellent corrosion resistance, and high-temperature endurance, making it a favorite in both general and military industries. Compliance is ensured with standards like ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 titanium plate is composed of 90% titanium, 6% aluminum, and 4% vanadium. This α-β titanium alloy benefits from aluminum-stabilized α phase and vanadium-stabilized β phase. Key features include exceptional comprehensive performance and process efficiency. TC4 titanium alloy boasts superb strength at both room and high temperatures, excellent creep resistance, and thermal stability. It excels in fatigue performance and *** growth resistance in seawater, offering reliable fracture toughness and hot salt stress corrosion resistance. With outstanding process plasticity and superplasticity, Ti-6Al-4V titanium plate is suitable for diverse processing and welding techniques.
The Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military, power, vehicle armor, rocket precision guidance, and marine industries.
Grade 5 titanium alloy plate is the most commercially accessible of all titanium alloys, combining high strength with superior toughness. Ti-6Al-4V Grade 5 titanium alloy offers remarkable comprehensive properties:
Ti-6AL-4V titanium plates and sheets are essential for parts requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), with good ductility and lateral strength. Key applications include: 1. Jet engine components like compressor blades, disks, rings, fuselage parts, turbine disks, doors, bulkheads, and heat shields, landing gear doors, fuselage superplastic forming parts, and more. 2. Military uses such as armor, guidance systems, and shell casings. 3. Spacecraft components including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment like bicycle frames and golf clubs. 6. Any application requiring a high strength-to-weight ratio.
At Daxun, our rigorous quality assurance tests include flattening tests, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, expansion tests, and more. These tests ensure the material's suitability for its intended application. Throughout production, we measure product diameter, thickness, and surface integrity. Our standard delivery timeline is 5-7 days, with special size products delivered within 15-20 days.
Delving into the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Unveiling the Chemical Composition of Grade 2 Titanium SheetEssential for Diverse Industrial Uses
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Investigating the Mechanical Properties of Grade 2 Titanium Sheet Engineered for Durability and Strength
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is your unparalleled metal expert, specializing in both small-scale and expansive titanium plate projects. As your ultimate reference point and steadfast partner, DAXUN stands ready to supply superior titanium plates along with comprehensive technical support. Think of DAXUN not just as a supplier of high-purity industrial titanium and titanium alloys, but as your strategic ally, poised to navigate any challenges and fulfill all your needs. With DAXUN by your side, achieving your project goals becomes a seamless reality.
DAXUN's state-of-the-art service center in China boasts an extensive inventory of titanium plate products, ensuring rapid order processing. Through expert basic processing, precise water jet cutting, and efficient plate nesting services, we deliver unparalleled value to our customers, significantly reducing both time and costs.
DAXUN's unwavering commitment to continuous investment in production facilities, coupled with strategic capacity agreements with our trusted partners, ensures that we remain at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and the latest in technical information.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Our mission is to create the world's highest-performance titanium alloy plates. We offer rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN boasts a comprehensive inventory of alloy titanium plates Grade 5 (UNS R56400), available in thicknesses from 0.5mm to 300mm. For 0.5mm-6.0mm, we utilize cold rolling; for 6.0-50mm, hot rolling; and for 50mm and above, forging. Grade 5 titanium plate (Ti-6Al-4V) is renowned as the 'workhorse' of titanium materials, offering exceptional strength, ductility, and corrosion resistance coupled with high-temperature endurance. This makes it indispensable to numerous sectors, including general and military industries. Our products comply with a broad spectrum of standards: ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plates are pivotal in aerospace, military applications, the power industry, vehicle armor, rocket precision guidance parts, the marine industry, and more.
Grade 1
Today, DAXUN Alloys stands as a preeminent global producer and supplier of top-grade Grade 1 titanium plates.
Pure Grade 1 titanium plates exhibit exceptional ductility and cold formability, making them perfect for deep drawing applications. Known for its outstanding general and seawater corrosion resistance, Grade 1 titanium also excels against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (approximately half that of nickel-based alloys), superior strength-to-weight ratio, and robust corrosion resistance, it suits various harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile of its kind, offering excellent cold formability, corrosion resistance, weldability, and impact hardness.
ASTM B265 Titanium Gr 1 Plate Producers, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, ASTM B265 Titanium Grade 1 Coil Suppliers, Pure Titanium Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates Dealers, Titanium Gr 1 Perforated Plates, Titanium Grade 1 Sheets and Plates Manufacturers in China.
Grade 2
DAXUN is a distinguished producer and stockist of commercially pure titanium plates Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is hailed as the 'workhorse' of the commercially pure titanium family, offering a superb mix of strength, ductility, and corrosion resistance for numerous industrial uses.
Grade 2 Titanium Plate is a commercially pure titanium offering an excellent balance of strength and ductility. It boasts good impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. The plate also provides exceptional resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and exemplary corrosion resistance make it ideal for diverse applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred material for most industrial applications demanding excellent ductility and corrosion resistance.
DAXUN is a metal expert dedicated to both small and large titanium plate projects. As your steadfast partner, DAXUN is committed to supplying top-notch titanium plates and providing comprehensive technical assistance. We aim to be more than just a supplier of industrial pure titanium plates and titanium alloy plates; we strive to be your strategic ally, helping you overcome challenges and fulfill your project aspirations.
At DAXUN's premier service center in China, we maintain an extensive inventory of titanium plates, enabling rapid order processing. Our array of value-added services, including basic processing, water jet cutting, and efficient plate nesting, ensures that we deliver unparalleled convenience and cost savings to our esteemed customers.
Through relentless investment in state-of-the-art production facilities and strategic capacity agreements with key partners, DAXUN consistently leads the market in titanium plate quality, both now and well into the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical information available.
){kind=link}