| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys is a premier global producer and supplier of top-tier Grade 1 titanium plates, renowned for their impeccable quality.
Pure Grade 1 titanium plate is celebrated for its superior ductility and exceptional cold formability, making it ideal for deep drawing applications. Grade 1 titanium is distinguished by its outstanding resistance to general and seawater corrosion, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. Titanium's low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and superb corrosion resistance make it an optimal choice for a myriad of harsh chemical environments. Commercially pure Grade 1 titanium, the softest and most ductile variant, excels in cold formability, corrosion resistance, weldability, and impact hardness.
We are prominent manufacturers and suppliers of ASTM B265 Titanium Grade 1 Plates, offering a comprehensive range of products including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. Our expertise extends to producing and supplying these high-quality titanium products in China.
We pride ourselves on offering customers prompt and efficient delivery of Grade 1 titanium plate products. Our streamlined system, encompassing production capacity, information flow, logistics, and capital flow, ensures speed without compromising quality. For instance, Daxun's order data is instantly integrated into our logistics system, facilitating seamless information transfer. Strategically located near highways, rivers, and seas, our logistics center ensures efficient scheduling, rapid response, storage, and transportation linkage, guaranteeing timely order completion.
Grade 1 titanium plate, known for its low density and excellent ductility, is ideal for industries requiring lightweight and deep drawing capabilities. Key sectors include medical, chemical equipment, and aerospace. The plate's strength and corrosion resistance also make it suitable for marine, chemical processing, and desalination applications. Typical uses for Grade 1 titanium alloys encompass oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, flue gas desulfurization systems, and numerous industrial components. Common standards include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
For Grade 1 Titanium Plates, the cold rolled thickness ranges from 0.3 mm to 6.0 mm, and the plates are available in hot rolled or heat treated conditions. The hot rolled thickness spans 4.76 mm to 155 mm. These plates are produced through longitudinal and transverse rolling. Additionally, creep flattening can be utilized as a heat treatment to alleviate internal stresses and meet special flatness requirements. The plates can be supplied as cut blanks, offering parts with complex shapes derived from a parent plate. Further processing, either mechanical or chemical, is tailored to meet specific customer requirements.
Chemical Composition of Ti 6AL-4V (Grade 5) Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition of Grade 2 Titanium SheetSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished leader in the metal industry, specializing in both small and large-scale titanium plate projects. As your benchmark in the field, DAXUN stands as your steadfast partner, prepared to supply high-quality titanium plates and offer comprehensive technical support. Beyond being just a supplier of industrial pure titanium and titanium alloy plates, DAXUN is your strategic ally, dedicated to helping you overcome any obstacles and satisfy every requirement, ultimately empowering you to achieve your project ambitions with unparalleled success.
DAXUN's state-of-the-art service center in China boasts a robust inventory of titanium plates, ensuring rapid order processing. With advanced basic processing, precision water jet cutting, and efficient plate nesting services, we enhance value for our customers, significantly reducing both time and expenses.
DAXUN's ongoing investment in cutting-edge production facilities, alongside strategic capacity agreements with our partners, guarantees that DAXUN remains at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the latest information on titanium plate prices and technical details.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
At DAXUN, we pride ourselves as a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to produce the world's finest high-performance titanium alloy plates with rapid global delivery - ASTM B265 Grade 2 and Grade 5. Our extensive inventory of Grade 5 (UNS R56400) titanium plates ranges in thickness from 0.5mm to 300mm, encompassing cold rolled (0.5mm-6.0mm), hot rolled (6.0-50mm), and forged options (50mm+). Grade 5 titanium plate (Ti-6Al-4V) stands as the quintessential titanium alloy, known for its exceptional strength, ductility, corrosion resistance, and high temperature tolerance, making it indispensable in both general and military industries. Compliance includes: ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military applications, power industries, vehicle armor, rocket precision guidance components, and the marine sector.
Grade 1
Today, DAXUN Alloys stands as a foremost global producer and supplier of top-tier Grade 1 titanium plates.
Our Pure Grade 1 titanium plates boast superb ductility and cold formability, ideal for deep drawing applications. Renowned for its outstanding general and seawater corrosion resistance, Grade 1 titanium excels in oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), combined with a high strength-to-weight ratio and corrosion resistance, makes it an excellent choice for a variety of stringent chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, offering excellent weldability, cold formability, and impact hardness.
We are esteemed producers of ASTM B265 Titanium Gr 1 Plates, including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled and Cold Rolled Plates, and Patterned and Perforated Plates. As reputable dealers and manufacturers in China, our Titanium Gr 1 products meet the highest standards of quality and performance.
Grade 2
DAXUN is committed to producing and stocking commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. As the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) merges high strength, ductility, and superb corrosion resistance for numerous industrial applications.
The Grade 2 Titanium Plate, a commercially pure titanium, strikes an excellent balance between strength and ductility. With strong impact resistance and easy weldability, it offers outstanding corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing settings, and wet ***. Its exceptional resistance to seawater and salt solutions enhances its versatility.
With its low density, high strength-to-weight ratio, and corrosion resistance, titanium is ideal for diverse applications. Grade 2 Titanium Plate excels in resisting stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, it is the preferred alloy for industrial uses requiring good ductility and corrosion resistance.
At DAXUN, we are metal experts dedicated to both small and large titanium plate projects. As your trusted reference point and long-term partner, we are committed to providing high-quality titanium plates and comprehensive technical support. Consider DAXUN not only as your supplier of industrial pure titanium and titanium alloy plates, but also as your strategic partner, ensuring you overcome challenges and meet your project goals.
DAXUN's premier service center in China boasts an extensive inventory of titanium plate products, ensuring rapid order processing. With advanced capabilities in basic processing, precision water jet cutting, and efficient plate nesting, we deliver unparalleled value to our customers, significantly reducing their time and costs.
Our unwavering commitment to continuous investment in DAXUN's state-of-the-art production facilities, coupled with strategic capacity agreements with our esteemed partners, guarantees that DAXUN remains at the pinnacle of titanium plate quality, both now and for the foreseeable future.
Connect with DAXUN today to secure the most competitive titanium plate prices and access comprehensive technical information tailored to your needs.
Q1: What products can you offer?
A: We proudly offer a wide range of general steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, 316L/300 series, and 316. Additionally, we provide high-quality 400 series and duplex stainless steels like 2205, 2304, 2101, and 2507. Our high-nickel alloy options include 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products tailored to your specific drawings, ensuring they meet your utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain rigorous quality control measures from the very beginning to the final stages of production.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can alter the packaging and transportation according to your preferences. However, please note that you will be responsible for any additional costs and differences incurred during this process.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain rigorous quality control measures from the very beginning to the final stages of production.
Q6. How long is the delivery time?
A: Our standard delivery time is 7 to 20 working days after payment confirmation. If your order is urgent, we will expedite the production process to meet your deadline.
Q7. What is your payment policy?
A: We offer several payment options: 100% T/T in advance, Western Union for small orders, 30% T/T upfront with the remaining 70% before shipment, and 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are ideal for products like stainless steel pots, sinks, and bowls. Just let us know your specific application, and we will adjust the mechanical properties accordingly to meet your requirements.
Q9: How can I get a sample?
A: We offer FREE samples for your evaluation. For small pieces, we can cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: To date, we have exported our stainless steel materials to numerous countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many others.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}