| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a leading Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Committed to creating world's high-performance titanium alloy plates, we ensure rapid global deliveries of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks and produces Grade 5 alloy titanium plates (UNS R56400) in thicknesses spanning 0.5mm to 300mm. Plates range from cold-rolled (0.5mm-6.0mm), hot-rolled (6.0-50mm), to forged (50mm and above). Grade 5 titanium plate (Ti-6Al-4V) is the quintessential 'workhorse' of titanium alloys, merging high strength, ductility, exceptional corrosion resistance, and high-temperature resilience, making it a favorite in both general and military industries. Compliance with standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate consists of 90% titanium, 6% aluminum, and 4% vanadium, forming an α-β titanium alloy where aluminum stabilizes the α phase and vanadium stabilizes the β phase. Key features include superb comprehensive performance and excellent process performance. TC4 titanium alloy boasts remarkable room temperature and high-temperature strength, robust creep resistance and thermal stability, superior fatigue performance, and *** growth resistance in seawater. It also offers satisfactory fracture toughness and hot salt stress corrosion resistance. Ti-6Al-4V titanium plate exhibits exceptional process plasticity and superplasticity, compatible with diverse processing methods, welding, and machining techniques.
Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military, power industries, vehicle armor, rocket precision guidance components, and marine sectors.
Grade 5 titanium alloy plate is the most commercially available titanium alloy, renowned for its high strength and toughness. Ti-6Al-4V Grade 5 titanium alloy showcases outstanding comprehensive properties:
Ti-6AL-4V titanium plates and sheets suit parts demanding corrosion resistance, stress corrosion resistance, and high strength (400-450°C) while maintaining good ductility and lateral strength: 1. Jet engine compressor blades, disks and rings, wings, fuselages, turbine disks, doors, bulkheads, military aircraft, and hardware heat shields, engine nozzles, landing gear doors, fuselage superplastic forming parts, etc. 2. Military applications: armor, guidance systems, shell casings, etc. 3. Spacecraft components: ***s, heat shields, etc. 4. Medical and surgical instruments. 5. Sports equipment: bicycle frames, golf clubs. 6. Additional uses requiring a high strength-to-weight ratio.
Daxun rigorously conducts multiple quality assurance tests, including flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. These ensure suitability for intended applications. We measure diameter, thickness, and surface during production. Standard delivery spans 5-7 days, with special size products delivered in 15-20 days.
Delve into the intricate chemical composition of the premium (Ti 6AL-4V) Grade 5 titanium sheet.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Explore the detailed chemical composition of our high-purity Grade 2 titanium sheet.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Uncover the robust mechanical properties of our Grade 2 titanium sheet, engineered for excellence.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert specializing in both small and large-scale titanium plate projects. As your reference point and long-term partner, DAXUN is dedicated to delivering top-quality titanium plates and unparalleled technical assistance to elevate your business. Think of DAXUN not just as a supplier of high-grade industrial pure titanium plates and titanium alloy plates, but as a strategic partner committed to helping you conquer challenges and fulfill your project aspirations with ease.
DAXUN's state-of-the-art service center in China boasts an extensive inventory of titanium plate products, ensuring rapid order processing. We augment our offerings with essential processing services, such as water jet cutting and plate nesting, providing significant value to our customers by reducing both time and costs.
Our unwavering commitment to continuous investment in DAXUN's production facilities, coupled with strategic capacity agreements with our partners, guarantees that DAXUN remains at the pinnacle of titanium plate quality, both now and in the foreseeable future.
Reach out to DAXUN today to discover the latest titanium plate prices and detailed technical information. Your journey towards achieving excellence starts here.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! We strive to create the world's highest-performance titanium alloy plates. We offer swift global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN boasts a comprehensive inventory of Grade 5 (UNS R56400) titanium plates with thicknesses ranging from 0.5mm to 300mm. Our cold-rolled plates measure 0.5mm-6.0mm, hot-rolled plates span 6.0mm-50mm, and forged plates reach 50mm and above. Grade 5 titanium (Ti-6Al-4V) is acclaimed as the 'workhorse' of titanium materials, combining superior strength, ductility, and outstanding resistance to corrosion and high temperatures, making it the preferred choice for both general and military applications. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and other standards.
Ti-6Al-4V Grade 5 Titanium Plates are primarily utilized in aerospace, military, power industries, vehicle armor, rocket precision guidance systems, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 Titanium Plates.
Pure Grade 1 Titanium Plates offer exceptional ductility and cold formability, making them perfect for deep drawing applications. Known for superb general and seawater corrosion resistance, Grade 1 titanium withstands oxidizing, neutral, and mildly reducing solutions, including chlorides. Exhibiting about half the density of nickel-based alloys, titanium's high strength-to-weight ratio and corrosion resistance make it ideal for diverse harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile variant, featuring excellent cold formability, superior corrosion resistance, impressive weldability, and notable impact hardness.
Producers of ASTM B265 Titanium Grade 1 Plates, Sheets, Finished Plates, and Coils. Suppliers of Pure Titanium Grade 1 Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and Sheets & Plates in China.
Grade 2
DAXUN manufactures and stocks commercially pure Grade 2 Titanium Plates (UNS R50400) in thicknesses from 0.5mm to 120mm. This grade, known as the 'workhorse' of commercially pure titanium, provides a superb blend of high strength, ductility, and excellent corrosion resistance, catering to numerous industrial applications.
Grade 2 Titanium Plates, being commercially pure, strike an ideal balance between strength and ductility. They possess impressive impact strength and weldability, withstanding highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. They excel in resisting seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance render it perfect for various applications. It effectively counters stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plates are the preferred material for most industrial applications demanding good ductility and corrosion resistance.
DAXUN is your go-to expert for both small and large titanium plate projects. We are your reliable partner, ready to supply titanium plates and provide any technical assistance you might need. DAXUN is not just a supplier but a strategic partner, dedicated to helping you navigate challenges and achieve your project goals with our industrial pure titanium and titanium alloy plates.
Experience unparalleled efficiency with DAXUN's service center in China, where we maintain a robust inventory of titanium plate products for rapid order fulfillment. Our comprehensive offerings include basic processing, precision water jet cutting, and expertly designed plate nesting services. These value-added solutions not only elevate product quality but also deliver significant time and cost savings for our customers.
DAXUN's unwavering commitment to excellence is showcased through our continuous investment in cutting-edge production facilities and strategic capacity agreements with our esteemed partners. This proactive stance ensures that our titanium plates remain the benchmark of quality and innovation, securing DAXUN's leadership in the industry both now and in the future.
Reach out to DAXUN today and discover the most competitive titanium plate prices along with comprehensive technical information tailored to your needs.
){kind=link}