| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a preeminent global producer and supplier of superior quality Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it perfect for deep drawing applications. Renowned for its superb resistance to general and seawater corrosion, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides, Grade 1 titanium is a versatile solution. Its low density-approximately half that of nickel-based alloys-coupled with a high strength-to-weight ratio and unmatched corrosion resistance, makes it ideal for demanding chemical environments. Grade 1 is the softest and most ductile among commercially pure titanium grades, offering superb cold formability, excellent corrosion resistance, superior weldability, and notable impact hardness.
Manufacturers and Suppliers of ASTM B265 Titanium Gr 1 Plates, Sheets, and Coils: Hot Rolled, Cold Rolled, Patterned, and Perforated. Leading Dealers of Pure Titanium Grade 1 in China.
At Jiangsu Daxun Alloy Co., Ltd., we pride ourselves on delivering Grade 1 titanium plate products swiftly and efficiently. This speed is backed by robust system support that spans production capacity, information flow, logistics, and capital flow. For instance, our order data is seamlessly integrated with our logistics system in real time, ensuring prompt processing; strategically located near highways and waterways, our logistics operate with optimal scheduling, rapid response, and efficient storage and transportation linkages, guaranteeing timely completion of every task.
The Grade 1 titanium plate, with its lower density and superior ductility, is perfect for industries that prioritize weight management and deep drawing processes. Key sectors benefiting from titanium alloys include medical, chemical equipment, and aerospace industries. The unparalleled strength and corrosion resistance of Grade 1 titanium make it ideal for marine, chemical processing, and desalination applications. Common uses include oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, flue gas desulfurization systems, and various other industrial components. Adhering to standards such as ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
The cold rolled thickness range for Grade 1 Titanium Plates is between 0.3 mm and 6.0 mm, while the hot rolled range spans from 4.76 mm to 155 mm. These plates can be supplied either in a hot rolled or heat-treated condition, produced through longitudinal and transverse rolling techniques. If needed, creep flattening can be utilized as a heat treatment to alleviate internal stresses and meet specific flatness criteria. Additionally, plates can be provided as cut blanks, with parts intricately cut from a parent plate according to customer specifications, through either mechanical or chemical processing.
Chemical Composition Details of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition Details of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished authority in the metal industry, specializing in both small and large-scale titanium plate projects. DAXUN stands as your definitive reference point and enduring partner, poised to deliver top-tier titanium plates and comprehensive technical support tailored to your business needs. As a trusted supplier of industrial pure titanium plates and titanium alloy plates, DAXUN also serves as your strategic ally, equipped to navigate any challenges and requirements you face, thereby ensuring the successful realization of your project objectives.
DAXUN's service center in China boasts a readily available stock of titanium plate products, ensuring swift order processing. With our capabilities in basic processing, water jet cutting, and plate nesting, we deliver exceptional value to our customers, effectively saving them both time and costs.
Through continuous investment in our state-of-the-art production facilities and capacity agreements with our partners, DAXUN remains at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the latest titanium plate prices and detailed technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a distinguished manufacturer and supplier of Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plates in China. We aspire to create the world's finest high-performance titanium alloy plates and ensure swift global delivery. Our ASTM B265 Grade 2 and Grade 5 titanium plates are available in thicknesses from 0.5mm to 300mm (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm+ forged). Renowned as the 'workhorse' of titanium alloy materials, Grade 5 titanium plates combine high strength, ductility, excellent corrosion, and high-temperature resistance, making them ideal for various industrial and military applications. Compliance standards include ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, among others.
Our Ti-6Al-4V Grade 5 titanium plates find extensive use in aerospace, military industries, power sectors, vehicle armor, rocket precision guidance systems, marine applications, and more.
Grade 1
Today, DAXUN Alloys stands as a preeminent global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plates are celebrated for their exceptional ductility and cold formability, making them perfect for deep drawing applications. Known for superior general and seawater corrosion resistance, as well as resilience in oxidizing, neutral, and mildly reducing media, including chlorides, Grade 1 titanium offers low density (approximately half that of nickel-based alloys), a high strength-to-weight ratio, and outstanding corrosion resistance. Soft, ductile, and highly weldable, Grade 1 titanium is ideal for various harsh chemical conditions.
We supply ASTM B265 Titanium Grade 1 Plates, including hot and cold-rolled sheets, finished plates, patterned, and perforated plates. DAXUN is a trusted name for Titanium Gr 1 coil suppliers, and manufacturers of sheets and plates in China.
Grade 2
DAXUN specializes in producing and stocking commercially pure titanium plates Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the 'workhorse' of the commercially pure titanium family, balancing high strength, ductility, and superior corrosion resistance for a multitude of industrial applications.
Grade 2 Titanium Plates are known for their excellent strength-to-ductility balance, high impact strength, and ease of welding. They offer impressive resistance to highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. Additionally, they withstand seawater and salt solutions effectively.
With its low density, high strength-to-weight ratio, and impressive corrosion resistance, Grade 2 Titanium is a go-to material for various applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the choice alloy for industrial applications demanding good ductility and corrosion resistance.
DAXUN is a metal expert dedicated to both small and large titanium plate projects. As your trusted partner, DAXUN meets all your titanium plate needs and provides technical assistance to overcome any challenges. Consider DAXUN not just as a supplier but as a strategic partner committed to helping you achieve your project goals with our industrial pure titanium plates and titanium alloy plates.
At DAXUN, our China-based service center is fully equipped with an extensive inventory of titanium plate products ready for immediate processing. Leveraging advanced techniques such as basic processing, precision water jet cutting, and efficient plate nesting, we provide extraordinary value to our customers. These services are meticulously designed to save you both time and costs, making DAXUN your trusted partner for premium titanium solutions.
DAXUN's unwavering commitment to excellence is evident through our continuous investment in state-of-the-art production facilities and strategic capacity agreements with our esteemed partners. These initiatives solidify DAXUN's leadership in delivering unparalleled titanium plate quality, setting the benchmark both now and in the future.
Reach out to DAXUN today to access the most competitive pricing and comprehensive technical information on our superior titanium plates. Experience the DAXUN difference and elevate your projects to new heights of excellence.
Q1: What products can you offer?
A: We proudly provide a comprehensive array of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and the entire 300 series.
Additionally, we specialize in the 400 series and duplex stainless steels like 2205, 2304, 2101, 2507, along with high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products precisely according to your drawings to ensure utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We consistently place great emphasis on quality control from inception to completion.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation form based on your request,
though you will need to cover any additional costs incurred during this process.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We consistently place great emphasis on quality control from inception to completion.
Q6. How long is the delivery time?
A: Our standard delivery time is 7~20 working days post payment confirmation.
For urgent orders, we expedite processing to complete it ahead of schedule.
Q7. What are your payment terms?
A: We offer the following payment options:
B: 30% T/T in advance and the remaining balance of 70% before shipment.
C: 100% Irrevocable LC at sight for substantial orders.
Q8: Can you provide Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for producing stainless steel pots, sinks, bowls, etc. Provide us with your specific use case, and we'll tailor the mechanical properties accordingly.
Q9: How can I get a sample?
A: We offer FREE samples for you to check and test. If it's a small piece, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have proudly exported our stainless steel materials to several countries, including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many others.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}