| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a preeminent global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, rendering it perfect for deep drawing. Renowned for its superb general and seawater corrosion resistance, Grade 1 titanium also excels against oxidizing, neutral, and mildly reducing solutions, including chlorides. Its low density-about half that of nickel-based alloys-paired with a high strength-to-weight ratio and robust corrosion resistance, makes it an optimal choice for various challenging chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile variant, showcasing excellent cold formability, outstanding corrosion resistance, superior weldability, and notable impact hardness.
ASTM B265 Titanium Grade 1 Plate Producers, Titanium Grade 1 Sheets, Titanium Grade 1 Finished Plates, ASTM B265 Titanium Grade 1 Coil Suppliers, Pure Titanium Grade 1 Hot Rolled Plates, Titanium Grade 1 Cold Rolled Plates, Titanium ASTM B265 Grade 1 Sheets, Grade 1 Titanium Patterned Plates Dealers, Titanium Grade 1 Perforated Plates, Titanium Grade 1 Sheets and Plates Manufacturers headquartered in China.
We ensure our customers enjoy swift and prompt delivery of Grade 1 titanium plate products. This speed is supported by a robust system, from production capacity and information flow to logistics and financial management. For instance, our order data is instantly relayed to the logistics system, ensuring seamless integration. Strategically located processing centers near highways, rivers, and seas facilitate efficient scheduling, rapid response, and coordinated storage and transportation. This comprehensive logistics approach guarantees timely completion of all tasks.
Grade 1 titanium plate, known for its lower density and high ductility, is ideal for industries mindful of weight and requiring deep drawing processes. Key sectors utilizing titanium alloys include medical, chemical equipment, and aerospace. The superior strength and corrosion resistance of Grade 1 titanium make it indispensable for marine, chemical processing, and desalination industry applications. Typical uses encompass oil and gas components, reaction and pressure vessels, piping systems, power units, heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Standards commonly adhered to are ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
For Grade 1 Titanium Plates, the cold rolled thickness ranges from 0.3 mm to 6.0 mm, supplied in either hot rolled or heat treated conditions. The hot rolled thickness spans 4.76 mm to 155 mm, produced through longitudinal and transverse rolling. If required, creep flattening serves as a heat treatment to alleviate internal stresses and meet specific flatness criteria. Plates can be provided as cut blanks, i.e., parts with intricate shapes cut from a parent plate. Subsequent processing, whether mechanical or chemical, is tailored to customer requirements.
Chemical composition of (Ti 6AL-4V) Grade 5 titanium sheet.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical composition of Grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical properties of Grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN stands as a beacon of expertise in both small and large-scale titanium plate projects. As your dedicated reference point and long-term partner, DAXUN is committed to delivering top-tier titanium plates and comprehensive technical support tailored to your business needs. Beyond being a mere supplier of industrial pure titanium and titanium alloy plates, DAXUN is your strategic ally, poised to overcome any challenges and fulfill all requirements, propelling you towards the successful realization of your project goals.
Strategically located in China, DAXUN's service center boasts a robust inventory of titanium plate products, ensuring swift order processing. Our services, including basic processing, precision water jet cutting, and plate nesting, offer substantial added value-optimizing your operations, saving invaluable time, and cutting costs.
DAXUN's unwavering commitment to continuous investment in state-of-the-art production facilities, coupled with strategic capacity agreements with our partners, secures our position as a leader in titanium plate quality-now and well into the future.
Reach out to DAXUN today for the most competitive titanium plate prices and the latest technical insights, and experience unparalleled support tailored to your specific needs.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN proudly stands as a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China. Our mission is to craft the world's most advanced titanium alloy plates, ensuring rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our extensive inventory includes alloy titanium plates in Grade 5 (UNS R56400) with thicknesses spanning from 0.5mm to 300mm. Plates from 0.5mm-6.0mm are cold rolled, 6.0-50mm are hot rolled, and those above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is known as the 'workhorse' of titanium alloys, combining unmatched strength, ductility, corrosion resistance, and temperature resilience, making it indispensable for general and military industries. Compliant with standards like ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 Titanium Plates are extensively utilized in aerospace, military sectors, power industry, vehicle armor, precision rocket guidance components, marine applications, and more.
Grade 1
DAXUN Alloys stands as a preeminent global producer and supplier of superior-quality Grade 1 titanium plates, setting new benchmarks in the industry.
Our Pure Grade 1 titanium plates exhibit exceptional ductility and cold formability, making them ideal for deep drawing applications. Grade 1 titanium is celebrated for its superb general and seawater corrosion resistance, as well as its resilience against oxidizing, neutral, and mildly reducing environments, including chlorides. With a low density-approximately half that of nickel-based alloys-high strength-to-weight ratio, and formidable corrosion resistance, Grade 1 titanium is perfect for various harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, offering excellent weldability, cold formability, and impact hardness.
Producers of ASTM B265 Titanium Grade 1 Plates, Sheets, and Coils, DAXUN offers an extensive range of titanium products including hot rolled and cold rolled plates, patterned and perforated plates, and more. As leading manufacturers in China, we provide high-quality Titanium Gr 1 finished plates, coils, and sheets to meet diverse industry needs.
Grade 2
DAXUN manufactures and stocks commercially pure Grade 2 titanium plates (UNS R50400) in thicknesses from 0.5mm to 120mm. This 'workhorse' of commercially pure titanium offers a blend of strength, ductility, and superior corrosion resistance, making it a top choice for numerous industrial applications.
Grade 2 Titanium Plate (UNS R50400) offers a harmonious balance of strength and ductility, with excellent impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also withstands the corrosive effects of seawater and salt solutions efficiently.
With its low density, high strength-to-weight ratio, and exceptional corrosion resistance, titanium is ideal for a multitude of applications. Grade 2 Titanium Plate resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Its melting point of 1660°C makes it a preferred material for industrial applications requiring robust ductility and corrosion resistance.
DAXUN, the titan in metal expertise, handles both small and large titanium plate projects. As your reliable partner, DAXUN offers comprehensive support and titanium solutions to suit your business needs. Beyond being a supplier of industrial pure titanium and titanium alloy plates, DAXUN is your strategic ally, ensuring you overcome challenges and achieve your project objectives with ease.
Experience unparalleled efficiency with DAXUN's service center in China, where we stock an extensive range of titanium plate products ready for swift order processing. Our comprehensive services, including basic processing, precision water jet cutting, and expert plate nesting, offer significant value to our customers by streamlining their operations and reducing both time and costs.
DAXUN continues to lead the industry through relentless investment in state-of-the-art production facilities and strategic capacity agreements with our partners. These initiatives ensure that DAXUN remains synonymous with top-tier titanium plate quality, both now and for the future.
Reach out to DAXUN today to secure the most competitive prices and obtain the latest technical specifications for our titanium plate offerings.
Q1: What products can you offer?
A: We offer a comprehensive range of steel products, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300.
Additionally, we provide the 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507. Also available are high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products exactly according to your drawings, ensuring maximum satisfaction.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We maintain rigorous quality control measures throughout the entire production process.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can customize the packaging and transportation to meet your requirements.
Please note that any additional costs incurred during this period will be your responsibility.
Q5. How does your factory do regarding quality control?
Quality is our top priority. We maintain rigorous quality control measures throughout the entire production process.
Q6. How long is the delivery time?
A: The delivery time ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we expedite the process to meet your timeline.
Q7. What is your Payment?
A: 100% T/T in advance, Western Union for small orders.
B: 30% T/T, with the remaining 70% paid before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, and more. Tell us your specific usage, and we'll adjust the mechanical properties to your needs.
Q9: How to get a sample?
A: Free samples are available for your inspection and testing. For small sample pieces, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to various countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How to visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}