| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the 'workhorse' of the commercially pure titanium family. It combines high tensile strength, superior ductility, and outstanding corrosion resistance for a broad spectrum of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate that strikes an excellent balance between strength and ductility. With good impact strength, ease of welding, and superior corrosion resistance, it performs exceptionally well in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Furthermore, it exhibits remarkable resistance to seawater and salt solutions.
Titanium's low density coupled with its high strength-to-weight ratio and exceptional corrosion resistance make it a premier material across a broad range of applications. It effectively withstands stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for most industrial applications demanding excellent ductility and corrosion resistance.
Grade 2 titanium plate, with its lower density, is ideal for applications where weight is a critical factor. Industries such as medical, chemical equipment, and aerospace are prime sectors utilizing titanium alloys. Its strength and corrosion resistance make it perfect for applications in marine, chemical processing, and desalination industries. Typical uses for Grade 2 titanium alloys include oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Common standards include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
Daxun ensures product suitability for required applications through rigorous quality assurance tests, including flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. Throughout the production process, we meticulously measure the diameter, thickness, and surface of our products. Our standard delivery time is 5-7 days, with special size products delivered within 15-20 days.
Titanium Grade 2 Plates are available in cold rolled thicknesses from 0.3 mm to 6.0 mm and hot rolled thicknesses from 4.76 mm to 155 mm. These plates are supplied in hot rolled or heat treated conditions and are produced by longitudinal and transverse rolling. If necessary, creep flattening can be applied as a heat treatment to relieve internal stresses and meet special flatness requirements. Plates can also be supplied in cut blank form, allowing parts with complex shapes to be cut from a parent plate. Further processing, whether mechanical or chemical, is customized to the customer's requirements.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished authority in the realm of both small and large-scale titanium plate projects. As your go-to expert and enduring partner, DAXUN stands ready to provide top-tier titanium plates and comprehensive technical support tailored to your business needs. More than just a supplier of industrial pure titanium plates and titanium alloy plates, DAXUN is your strategic ally, dedicated to helping you navigate challenges and fulfill all project requirements, ensuring the ultimate success of your objectives.
DAXUN's service center in China maintains a robust inventory of titanium plate products, enabling swift order processing. By offering fundamental processing, precision water jet cutting, and efficient plate nesting solutions, we add considerable value for our clients, significantly reducing both time and expenses.
Through relentless investment in our production facilities and strategic capacity agreements with partners, DAXUN guarantees unparalleled titanium plate quality, solidifying our position at the industry's forefront now and in the future.
Reach out to DAXUN today for the most current titanium plate prices and in-depth technical details.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to produce the world's most advanced titanium alloy plates, and we offer swift global delivery for ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we stock Grade 5 (UNS R56400) alloy titanium plates in thicknesses ranging from 0.5mm to 300mm. For thicknesses of 0.5mm-6.0mm, the plates are cold rolled; for 6.0-50mm, they are hot rolled; and for 50mm and above, they are forged. Grade 5 titanium plate (Ti-6Al-4V) is renowned as the 'workhorse' of titanium alloys, blending high strength, ductility, outstanding corrosion and high temperature resistance. These qualities make it indispensable to both general and military industries. Compliance with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc., is assured.
Ti-6Al-4V Grade 5 titanium plates are primarily utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance components, and the marine sector.
Grade 1
Today, DAXUN Alloys stands as a foremost global producer and supplier of top-tier Grade 1 titanium plates.
Commercially pure Grade 1 titanium plates boast excellent ductility and cold formability, making them ideal for deep drawing. Grade 1 titanium is celebrated for its exceptional resistance to general and seawater corrosion, as well as its resistance to oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), combined with a high strength-to-weight ratio and superior corrosion resistance, makes it an excellent choice for a variety of harsh chemical conditions. Grade 1 titanium is the softest and most ductile of the commercially pure grades, with excellent cold formability, weldability, and impact hardness.
DAXUN offers ASTM B265 Titanium Grade 1 Plates, including Titanium Grade 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. We are leading suppliers and manufacturers in China of Grade 1 titanium sheets and plates.
Grade 2
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) ranging in thickness from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the 'workhorse' of the commercially pure titanium family, offering an optimal balance of high strength, ductility, and excellent corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate known for its superb balance of strength and ductility. It provides excellent impact strength and is easily weldable, with strong resistance to corrosion in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Furthermore, it shows excellent resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance make it indispensable for a wide range of applications. Grade 2 Titanium Plate is particularly effective in resisting stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the alloy of choice for most industrial applications requiring good ductility and corrosion resistance.
DAXUN is your trusted partner for both small and large titanium plate projects. As a metal expert, we stand ready to provide your business with top-quality titanium plates and any technical support you may need. Consider DAXUN not just as a supplier of industrial pure titanium plates and titanium alloy plates, but as a strategic partner committed to helping you overcome any challenges and meet your project goals.
At DAXUN's premier service center in China, we maintain an extensive inventory of titanium plate products, ensuring rapid order fulfillment. Our suite of services-including basic processing, precision water jet cutting, and efficient plate nesting-delivers unparalleled added value. By streamlining these processes, we save our customers both time and money.
DAXUN's relentless commitment to cutting-edge production facilities, paired with strategic capacity agreements with our esteemed partners, secures our position as a leader in titanium plate quality, both now and for the future. Our continuous investments guarantee unmatched product excellence and innovation.
Reach out to DAXUN today for the most competitive pricing and detailed technical specifications on our titanium plates. Our dedicated team is ready to provide you with up-to-date information and superior customer service.
Q1: What products can you offer?
A: We offer a wide range of general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and various 300 series.
We also specialize in 400 series and duplex stainless steels such as 2205, 2304, 2101, and 2507. Additionally, we provide high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Yes, we can manufacture products based on your drawings to ensure they meet your highest satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain stringent quality control measures from start to finish in our manufacturing processes.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods according to your requirements.
Please note that any additional costs and differences incurred during this period will be your responsibility.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain stringent quality control measures from start to finish in our manufacturing processes.
Q6. How long is the delivery time?
A: Our standard delivery time is 7~20 working days after payment confirmation.
If your order is urgent, we will expedite the production process to meet your deadlines.
Q7. What is your Payment?
A: We accept 100% T/T in advance, and for small orders, we also accept Western Union.
B: For larger orders, we require a 30% T/T deposit with the balance due before shipment.
C: For significant orders, we also accept a 100% Irrevocable LC at sight.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for making stainless steel pots, sinks, bowls, etc. Inform us of your specific usage, and we will adjust the mechanical properties to meet your requirements.
Q9: How to get a sample?
A: FREE samples are available for your inspection and testing. Depending on the sample size, we may cover the courier cost.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to numerous countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, and Ukraine, among others.
Q11: How to visit your company?
A: You can fly to Guangzhou Baiyun International Airport, where we will arrange to pick you up.
){kind=link}