| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | GR1 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global producer and trusted supplier of top-tier Grade 1 titanium plates, renowned for their exceptional quality.
Pure Grade 1 titanium plate possesses outstanding ductility and cold formability, making it the preferred choice for deep drawing applications. Known for its remarkable resistance to general and seawater corrosion, Grade 1 titanium also excels against oxidizing, neutral, and mildly reducing media, including chlorides. With its low density-approximately half that of nickel-based alloys-high strength-to-weight ratio, and superior corrosion resistance, titanium is an ideal material for various severe chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile grade, offering excellent cold formability, weldability, and impact hardness.
Manufacturers and suppliers of ASTM B265 Titanium Grade 1 Plates, Sheets, Coils, and Finished Plates, including hot and cold rolled options. We also offer Titanium Grade 1 Patterned and Perforated Plates. Trusted Dealers in Pure Titanium products in China.
We ensure our customers receive Grade 1 titanium plate products swiftly and reliably. Our efficient delivery is backed by robust systems encompassing production capacity, information flow, logistics, and capital flow. For instance, our order data seamlessly integrates with the logistics system in real-time. Strategically located processing centers near highways, rivers, and seas enable prompt scheduling, quick response, efficient storage, and optimized transportation, ensuring timely completion of tasks.
Grade 1 titanium plate's low density and high ductility make it an ideal material for weight-sensitive and deep drawing processes. Key industries include medical, chemical equipment, and aerospace. Its strength and corrosion resistance are perfect for marine, chemical processing, and desalination applications. Typical uses include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and various industrial components. Common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972
The cold rolled thickness range for Grade 1 Titanium Plates spans from 0.3 mm to 6.0 mm, while the hot rolled range extends from 4.76 mm to 155 mm. These plates are supplied in hot rolled or heat treated conditions, produced through longitudinal and transverse rolling. Creep flattening can be employed as a heat treatment to relieve internal stresses and meet specific flatness requirements. Plates can also be provided as cut blanks with complex shapes, tailored to customer requirements through mechanical or chemical processing.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN, a distinguished expert in the metal industry, specializes in both small and large-scale titanium plate projects. As your trusted reference point and long-term partner, DAXUN is dedicated to supplying premium titanium plates along with comprehensive technical assistance tailored to your business needs. Consider DAXUN not just a supplier of industrial pure titanium and titanium alloy plates, but a strategic ally committed to overcoming challenges and fulfilling your project aspirations with precision.
At DAXUN's state-of-the-art service center in China, we maintain a substantial inventory of titanium plate products, ensuring swift order processing. Our value-added services, including basic processing, water jet cutting, and plate nesting, are designed to save our customers both time and expenses, delivering efficiency and cost-effectiveness.
DAXUN's continuous investment in advanced production facilities and strategic capacity agreements with partners solidify our leadership in titanium plate quality, ensuring we remain at the industry's cutting edge now and into the future.
Reach out to DAXUN today for the latest updates on titanium plate pricing and technical specifications, and discover how we can support your project's success.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a distinguished manufacturer and supplier from China, excels in producing Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates. Aiming to craft the world's highest performing titanium alloy plates, DAXUN ensures swift global deliveries of ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our extensive inventory includes Grade 5 titanium plates (UNS R56400) with thicknesses ranging from 0.5mm to 300mm. Cold rolled plates are available from 0.5mm to 6.0mm, hot rolled from 6.0mm to 50mm, and forged plates for thicknesses above 50mm. Grade 5 titanium (Ti-6Al-4V) is renowned for its robust strength, ductility, corrosion resistance, and high temperature resistance, making it a preferred choice in general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN standards.
Ti-6Al-4V Grade 5 titanium plates find extensive use in aerospace, military, power, vehicle armor, rocket precision guidance, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a premier global producer and supplier of high-quality Grade 1 titanium plates.
Pure Grade 1 titanium plates exhibit superior ductility and cold formability, making them ideal for deep drawing applications. Grade 1 titanium offers outstanding general and seawater corrosion resistance, as well as resistance to oxidizing, neutral, and mildly reducing solutions, including chlorides. With low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and excellent corrosion resistance, it is an optimal choice for various harsh chemical conditions. Commercially pure Grade 1 titanium is the softest, most ductile variant, known for its exceptional cold formability, corrosion resistance, weldability, and impact hardness.
As leading producers of ASTM B265 Titanium Gr 1 Plates, we offer Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. DAXUN caters to all your titanium product needs, standing out as manufacturers and dealers of Titanium Grade 1 Sheets and Plates in China.
Grade 2
DAXUN specializes in the production and stocking of commercially pure titanium plates, Grade 2 (UNS R50400), available in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is recognized as the 'workhorse' of commercially pure titanium, combining high strength, ductility, and excellent corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium material, strikes a perfect balance between strength and ductility, offering superior impact strength and weldability. It boasts excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing conditions, and wet ***. Additionally, it exhibits remarkable resistance to seawater and salt solutions.
Titanium's low density, impressive strength-to-weight ratio, and corrosion resistance make it an exceptional choice for various applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is ideal for most industrial applications requiring excellent ductility and corrosion resistance.
DAXUN is a metal expert, dedicated to both small and large titanium plate projects. As your reliable partner, DAXUN is poised to supply titanium plates and provide any technical assistance required. Beyond being a supplier of industrial pure titanium and alloy plates, DAXUN serves as your strategic partner, helping you overcome challenges and meet project goals successfully.
At DAXUN's premier service center in China, we maintain an extensive stock of titanium plate products, enabling swift order processing to meet your urgent needs. By offering fundamental processing, precise water jet cutting, and efficient plate nesting services, we deliver exceptional value to our customers. This not only streamlines your production workflows but also significantly reduces time and costs.
DAXUN's relentless investment in state-of-the-art production facilities and our strategic capacity agreements with trusted partners ensure that we consistently lead the titanium plate industry in quality and innovation. Our commitment to excellence positions DAXUN at the forefront, today and for the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical information. Let us provide you with the expertise and products that set the standard in the industry.
Q1: What products can you offer?
A: We proudly offer a wide range of high-quality steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L 300.
Additionally, we provide the 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely! We can manufacture products tailored to your specific drawings, ensuring they meet your utmost satisfaction.
Q3. How does your factory manage quality control?
A: Quality is our top priority. We meticulously control the quality of our products from start to finish.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can certainly adapt the packaging and transportation to your specific requests,
although you will need to cover the associated costs and any additional expenses incurred.
Q5. How does your factory manage quality control?
A: Quality is our top priority. We meticulously control the quality of our products from start to finish.
Q6. What is the expected delivery time?
A: Our standard delivery time is 7 to 20 working days after payment confirmation.
For urgent orders, we expedite the process to meet your deadlines.
Q7. What are your payment terms?
A: 1. 100% T/T in advance or via Western Union for small orders.
2. A 30% T/T deposit with the remaining 70% payable before shipment.
3. 100% Irrevocable LC at sight for larger orders.
Q8: Can you provide DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for making stainless steel pots, sinks, bowls, etc. Share your usage requirements, and we will adjust the mechanical properties accordingly.
Q9: How can I obtain a sample?
A: FREE samples are available for your evaluation. For small pieces, we may cover the courier costs based on certain conditions.
Q10: Which countries have you exported to?
A: We have exported our top-quality stainless steel materials to countries such as Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will be there to pick you up.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}