| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is proud to produce and stock Grade 2 Titanium Plates (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Known as the 'workhorse' of commercially pure titanium, Grade 2 Titanium Plate combines remarkable strength, superior ductility, and exceptional corrosion resistance, making it ideal for numerous industrial applications.
The Grade 2 Titanium Plate stands out as a commercially pure titanium plate, offering an impeccable balance of strength and ductility. Boasting excellent impact strength and weldability, it exhibits outstanding corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its resilience extends to seawater and salt solutions, making it a versatile material for various applications.
With its low density, high strength-to-weight ratio, and excellent corrosion resistance, titanium is the ideal material for a diverse array of applications. Grade 2 Titanium Plate, with a melting point of 1660°C, is the preferred alloy for industrial uses requiring superb ductility and corrosion resistance. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C.
The lower density of Grade 2 Titanium Plate makes it indispensable where weight is a critical factor. Key industries include medical, chemical equipment, and aerospace. Its strength and corrosion resistance render it perfect for marine, chemical processing, and desalination applications. Typical uses encompass oil and gas components, reaction and pressure vessels, piping systems, power plants, heat exchangers, linings, and flue gas desulfurization systems. Adhering to standards such as ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
At Daxun, we ensure superior quality through rigorous quality assurance tests including flattening, pitting resistance, mechanical, hardness, material positive identification, and expansion tests. These tests guarantee the material's suitability for its intended application. Throughout production, we meticulously measure the diameter, thickness, and surface quality of our products. Standard delivery time ranges from 5-7 days, with special size products taking 15-20 days.
Titanium Grade 2 Plates come in cold rolled thicknesses from 0.3 mm to 6.0 mm, and hot rolled thicknesses from 4.76 mm to 155 mm. These plates, available in hot rolled or heat-treated conditions, are produced through longitudinal and transverse rolling. When necessary, creep flattening is employed as a heat treatment to relieve internal stresses and achieve special flatness requirements. Plates can be supplied as cut blanks, with complex shapes derived from parent plates, and further processing tailored to customer specifications, whether mechanical or chemical.
Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is an unparalleled metal authority specializing in both small and large titanium plate projects. As your go-to resource and steadfast partner, DAXUN is dedicated to equipping you and your enterprise with superior titanium plates and comprehensive technical support. Envision DAXUN not just as your supplier of industrial pure titanium plates and titanium alloy plates, but as your strategic ally, empowering you to overcome any obstacles and fulfill your project ambitions with unmatched efficiency.
DAXUN's state-of-the-art service center in China boasts a robust inventory of titanium plate products, ensuring rapid order fulfillment. We augment customer value through essential processing, precision water jet cutting, and meticulous plate nesting, effectively reducing both time and costs for our clients.
DAXUN's unwavering commitment to continual investment in production facilities, coupled with strategic capacity agreements with our partners, secures our position at the pinnacle of titanium plate quality-today and in the future.
Reach out to DAXUN today to discover the most competitive titanium plate prices and receive cutting-edge technical insights.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Our mission is to create the world's highest performing titanium alloy plates. We offer rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN produces and stocks Grade 5 (UNS R56400) titanium plates in thicknesses from 0.5mm to 300mm. Our 0.5mm-6.0mm plates are cold rolled, 6.0-50mm plates are hot rolled, and plates 50mm and above are forged. Grade 5 titanium plate (Ti-6Al-4V) is renowned for its high strength, ductility, excellent corrosion and high temperature resistance, making it a preferred choice for both general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military industries, power sectors, vehicle armor, rocket precision guidance parts, and the marine industry.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of top-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, ideal for deep drawing. It is renowned for its excellent general and seawater corrosion resistance, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (about half that of nickel-based alloys), a high strength-to-weight ratio, and superior corrosion resistance, Grade 1 titanium is perfect for a variety of harsh chemical conditions. It is the softest and most ductile commercially pure titanium, offering good cold formability, excellent corrosion resistance, superior weldability, and impressive impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, and Finished Plates. Suppliers of Titanium Grade 1 Coils, Pure Titanium Gr 1 Hot Rolled and Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Patterned Plates, Perforated Plates, and Manufacturers of Gr 1 Titanium Sheets and Plates in China.
Grade 2
DAXUN produces and stocks commercially pure Grade 2 titanium plates (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate is the 'workhorse' of the commercially pure titanium family, offering a perfect blend of high strength, ductility, and excellent corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium known for its excellent balance of strength and ductility. It offers good impact strength, easy weldability, and superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it resists seawater and salt solutions effectively.
Titanium's low density, high strength-to-weight ratio, and remarkable corrosion resistance make it an ideal material for a broad range of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the top choice for most industrial applications requiring good ductility and superior corrosion resistance.
DAXUN is a trusted metal expert specializing in both small and large titanium plate projects. As your reference point and long-term partner, DAXUN is ready to provide titanium plates and comprehensive technical assistance. Consider DAXUN not just a supplier of industrial pure titanium and titanium alloy plates but also a strategic partner aimed at helping you overcome challenges and achieve your project goals.
At Jiangsu Daxun Alloy Co., Ltd., our premier service center in China boasts a comprehensive inventory of top-tier titanium plate products, ensuring rapid order fulfillment and superior customer satisfaction. Leveraging advanced processing techniques, such as precision water jet cutting and efficient plate nesting, we deliver exceptional value to our clients, significantly reducing both time and costs.
Jiangsu Daxun Alloy Co., Ltd. consistently leads the industry through continuous investment in state-of-the-art production facilities and strategic capacity agreements with our esteemed partners. This commitment guarantees that we remain at the pinnacle of titanium plate quality, both now and in the foreseeable future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today to access the most competitive prices and the latest technical specifications for our premium titanium plates. Experience unparalleled service and expertise with DAXUN.
Q1: What products can you offer?
A: We offer a comprehensive range of steel types including general steels such as 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we provide variations within the 300 and 400 series, as well as duplex stainless steels like 2205, 2304, 2101, and 2507. Our high-nickel alloys include 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products based on your drawings to ensure your utmost satisfaction.
Q3. How does your factory handle quality control?
A: Quality is our top priority. From inception to completion, we maintain rigorous quality controls to ensure superior products.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods according to your requirements.
However, please note that any additional costs incurred during this process will need to be covered by you.
Q5. How does your factory handle quality control?
A: Quality is our top priority. We maintain rigorous quality controls from the beginning to the end of the production process.
Q6. How long is the delivery time?
A: Our standard delivery time is 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite production to meet your deadlines.
Q7. What are your payment terms?
A: We offer several payment options: 100% T/T in advance, Western Union for small orders, 30% T/T with the balance 70% before shipment, and 100% Irrevocable LC at sight for large orders.
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for producing stainless steel pots, sinks, bowls, etc. Let us know your specific usage, and we will adjust the mechanical properties accordingly to meet your requirements.
Q9: How can I obtain a sample?
A: We provide FREE samples for your evaluation. For small pieces, we can cover the courier costs depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}