Basic Info.
Model NO.
Titanium Alloy Plate
Material
TA2 Titanium Alloy
Surface Treatment
Sandblasting
Grade
Gr5 Ti-6al-4V Gr7 Gr9 Gr23
Quality
Third Party Inspection
Transport Package
Wooden Pallet
Specification
1000mm/1200mm/1500mm/2000mm
Product Description
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
Jiangsu Daxun Alloy Co., Ltd. is a leading producer of titanium sheets in China, committed to fulfilling the diverse and demanding needs of our global clientele!Jiangsu Daxun Alloy Co., Ltd. proudly produces and stocks commercially pure titanium plates Gr1, Gr2, Gr3, Gr4 (UNS), with thicknesses ranging from 0.5 mm to 120 mm. These titanium plates are the 'workhorse' of the pure titanium family, boasting high strength, remarkable ductility, and excellent corrosion resistance, suitable for a plethora of industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates are renowned for their purity and exceptional balance between strength and ductility. These plates offer impressive impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, wet ***, seawater, and salt solutions.
Gr5 (grade 5) Ti-6Al-4V titanium alloy plates are a premium choice, containing 90% titanium, 6% aluminum, and 4% vanadium. This α-β titanium alloy features aluminum for α phase stabilization and vanadium for β phase stabilization. The Gr5 Ti-6Al-4V titanium alloy plate boasts outstanding comprehensive performance, excellent processability, high temperature and room temperature strength, superior creep resistance, thermal stability, high fatigue performance, *** growth resistance in seawater, satisfactory fracture toughness, and hot salt stress corrosion resistance. Its exceptional plasticity and superplasticity make it suitable for various processing, welding, and machining methods.
Applications and Industry Standards
Gr1, Gr2, Gr3, Gr4, and Gr5 Titanium Plates offer a unique combination of low density and high strength, making them the ideal choice for weight-sensitive applications. These titanium plates are indispensable in industries such as military, medical, chemical equipment, and aerospace. Their remarkable strength and corrosion resistance extend their utility to the marine, chemical processing, and desalination sectors. Typical applications include oil and gas components, reaction and pressure vessels, piping systems, power and heat exchangers, linings, flue gas desulfurization systems, among many other industrial components. Adhering to common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.Outstanding Corrosion Resistance
Gr1, Gr2, Gr3, and Gr5 titanium plates excel in resisting seawater and marine atmospheric corrosion. While the four commercially pure grades share similar corrosion resistance, their mechanical properties vary with different oxygen and iron content. These grades withstand attack by wet chlorides, metal chlorides, chlorite and hypochlorite solutions, nitric and chromic acids, organic acids, and a variety of industrial gases.
Chemical Composition of Gr5 (Ti-6Al-4V) Titanium Sheet
| Chemical Composition: |
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | | 0.30% |
| O | Oxygen | | 0.20% |
| C | Carbon | | 0.08% |
| N | Nitrogen | | 0.05% |
| H | Hydrogen | | 0.01% |
| Y | Yttrium | | 0.01% |
| | Other, each | | 0.10% |
| | Other, total | | 0.40% |
| Ti | Titanium | | Remainder |
Mechanical Properties of (Ti-6Al-4V) Grade 5 Titanium Sheet
| Physical Properties | Metric | English | Comments |
| | | | |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties |
| | | | |
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition of Grade 2 Titanium Sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) |
| psi | MPa | ksi | psi | MPa | ksi | % |
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 |
Chemical Composition of Grade 1 Titanium Sheet
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | | 0.2 | |
| O | | 0.18 | |
| C | | 0.08 | |
| N | | 0.03 | |
| H | | 0.015 | |
| Ti | Balance | | |
Mechanical Properties of Grade 1 Titanium Sheet
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min | |
Chemical Composition of 3Al-2.5V Titanium Sheet
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | | 0.25 | |
| O | | 0.15 | |
| C | | 0.08 | |
| N | | 0.03 | |
| H | | 0.015 | |
| Ti | Balance | | |
Introduction to Titanium Plate Manufacturing Process
1. Cold-Rolled Titanium Plate: This high-performance plate is meticulously produced through plate rolling, with the final rolling step being cold rolling. Supplied in either work-hardened or heat-treated condition, these sheets are versatile and can undergo further mechanical or chemical processing based on customer specifications. 2. Hot-Rolled Titanium Plate: Produced through longitudinal or combined longitudinal and transverse rolling, these plates range in thickness from 3.0mm to 155mm and are supplied in a heat-treated condition. For special requirements, creep flattening can be applied to eliminate internal stress and achieve exceptional flatness. Sheets can be provided as cut blanks, allowing for complex shapes to be precision-cut from the parent metal, tailored to customer needs.3. Forged Titanium Plate: These robust plates are crafted by forging steel ingots on a vertical hydraulic press, followed by rolling, or through open die forging methods. Standard dimensions include thickness up to 580 mm, width up to 2000 mm, and length up to 6000 mm. Custom dimensions and weights are negotiable, ensuring a bespoke solution for every client.
Regardless of the type of titanium plate you require, Jiangsu Daxun Alloy Co., Ltd. delivers through efficient and high-quality production methods.
Available in a diverse array of alloys, widths, thicknesses, and lengths, our titanium plates are designed to meet your specific requirements with precision.
| CP GR1 Titanium plate PHYSICAL PROPERTIES |
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | |
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | |
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset |
| | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | |
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | |
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | |
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| | 0.8 | 0.8 | Ti sliding on Ti; 40 m/min |
| CP GR2 Titanium plate PHYSICAL PROPERTIES |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES |
| Physical Properties | Metric | English | Comments |
| | | | |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties |
| | | | |
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties |
| | | | |
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties |
| | | | |
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
A Global Leader in High-Performance Ti-6Al-4V Titanium Plate Alloy Grade 5 Titanium Plate Manufacturing Services
Titanium Alloy: Grade 5DAXUN is a Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! We are dedicated to creating the world's highest-performance titanium alloy plates. We offer rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN's inventory includes Grade 5 (UNS R56400) titanium plates with thicknesses from 0.5mm to 300mm. Our processes include cold rolling for 0.5mm-6.0mm, hot rolling for 6.0-50mm, and forging for plates above 50mm. Grade 5 titanium plate (Ti-6Al-4V) is the backbone of titanium alloys, offering high strength, ductility, and exceptional corrosion and high-temperature resistance, making it a preferred choice in both general and military sectors. Compliance with standards: ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Ti-6Al-4V Grade 5 titanium plates are predominantly utilized in aerospace, military, power industries, vehicle armor, precision guidance systems for rockets, and the marine sector.
Titanium Alloy: Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of superior-quality Grade 1 titanium plates.
Pure Grade 1 titanium plates offer exceptional ductility and cold formability, making them ideal for deep drawing processes. Known for its outstanding general and seawater corrosion resistance, Grade 1 titanium also resists oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), combined with a high strength-to-weight ratio and corrosion resistance, makes it suitable for challenging chemical environments. Commercially pure Grade 1 titanium is the most ductile and flexible, featuring excellent cold formability, superior corrosion resistance, superb weldability, and good impact hardness.
Producers and Suppliers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, Finished Plates, ASTM B265 Titanium Grade 1 Coils, Pure Titanium Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and Manufacturers of Titanium Grade 1 Sheets and Plates in China.
Titanium Alloy: Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) in various thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the essential material of the commercially pure titanium family, providing an optimal balance of strength, ductility, and superior corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering an exceptional blend of strength and ductility. It features impressive impact strength and easy weldability, with excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also boasts outstanding resistance to seawater and salt solutions.
With a low density, high strength-to-weight ratio, and exceptional corrosion resistance, titanium is ideal for various applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications, offering excellent ductility and corrosion resistance.
DAXUN is a metal expert specializing in both small and large titanium plate projects. As your long-term partner and reference point, DAXUN is poised to provide high-quality titanium plates and comprehensive technical assistance. Consider DAXUN not just a supplier but a strategic partner that helps you navigate challenges and meet all your needs, ensuring the success of your projects.
At DAXUN's premier service center in China, we maintain a robust stock of titanium plate products to ensure swift order processing. By offering essential processing services, including water jet cutting and precision plate nesting, we add significant value for our customers, ultimately saving them both time and costs.
Our unwavering commitment to continuous investment in DAXUN's state-of-the-art production facilities, coupled with strategic capacity agreements with our esteemed partners, positions DAXUN as a leader in titanium plate quality, now and into the future.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical information tailored to your needs.
Q1: What products can you offer?
A: We offer a diverse range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, 300 series.
Furthermore, we provide 400 series steels and duplex stainless steels like 2205, 2304, 2101, 2507. High-nickel alloys such as 904L, 800H, and 600H are also available.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products precisely according to your drawings to ensure they meet your requirements.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We maintain stringent quality control measures throughout the entire production process.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can modify the packaging and transportation methods to meet your specific requests.
However, you will be responsible for any additional costs and differences incurred during this period.
Q5. How does your factory do regarding quality control?
Quality is our top priority. We maintain stringent quality control measures throughout the entire production process.
Q6. How long is the delivery time?
A: The delivery time is typically between 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite production to meet your timeline.
Q7. What are your payment terms?
A: 100% T/T in advance, Western Union (for small orders).
B: 30% T/T upfront and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight (for large orders).
Q8: Can you produce DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Share your specific use case, and we'll adjust the mechanical properties accordingly.
Q9: How can I get a sample?
A: FREE samples are available for your inspection and testing. For small samples, we can cover the courier cost, depending on the situation.
Q10: To which countries have you exported?
A: We have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
Address:
B108, No. 32-1, Chengnan Road, Xinwu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, HQE, IFS
Company Introduction:
Founded in 2003, Daxun Alloy is a leading global metal material manufacturer. Headquartered in Wuxi, China, the company has multiple production bases and sales offices around the world. Daxun Alloy focuses on the development, production and sales of various stainless steels, titanium alloys, high-temperature alloys, etc. For general industry, construction, aerospace, energy, chemical industry, medical and other fields.
China, Daxun Metal Group is a global vertically integrated metal material manufacturer and stockist. Daxun can provide finished products and customized full-process services and professional technical services. Currently, the group has 600 employees and covers a total area of 130, 000 square meters. Daxun has a standing inventory of 50, 000 tons of stainless steel, 5, 000 tons of nickel-based alloys, and 2, 000 tons of pure titanium and titanium alloys. The main product forms are metal plates, metal coils, metal pipes, and metal bars. The metal materials produced by Daxun are market leaders for marine, energy, military, general industrial and aerospace applications. In addition, the company also produces seamless pipes, plates, forgings and other metal materials for power generation and oil and gas applications; Commercial and military alloy products; And metal alloys and other metal products for the forging industry.
