| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global producer and supplier of superior Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it the material of choice for deep drawing applications. Renowned for its outstanding resistance to general and seawater corrosion, as well as its resilience to oxidizing, neutral, and mildly reducing media (solutions), including chlorides. With its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and superior corrosion resistance, Grade 1 titanium is ideally suited for a multitude of challenging chemical environments. This commercially pure titanium grade is the softest and most ductile, offering excellent cold formability, exceptional weldability, and impressive impact hardness, making it highly versatile.
Leading Manufacturers and Suppliers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, Finished Plates, Grade 1 Coil, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates in China.
We pride ourselves on providing customers with prompt and efficient delivery of Grade 1 titanium plate products. Our speed is backed by a well-coordinated system that integrates production capacity, information flow, logistics, and capital flow. For instance, in terms of information flow, Daxun's order data is transmitted to the logistics system in real time, ensuring seamless connectivity. On the logistics front, our processing center's strategic location near highways, rivers, and seas enables optimal scheduling, rapid response, and efficient storage and transportation, guaranteeing timely task completion.
Grade 1 titanium plate, with its low density and high ductility, is perfect for industries prioritizing weight management and deep drawing processes. Key sectors include medical, chemical equipment, and aerospace. Its strength and corrosion resistance make it indispensable for marine, chemical processing, and desalination applications. Typical uses of Grade 1 titanium alloys encompass oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Standard specifications: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972
Our Grade 1 Titanium Plates come in cold rolled thicknesses ranging from 0.3 mm to 6.0 mm, and hot rolled thicknesses from 4.76 mm to 155 mm. These plates are available in both hot rolled or heat-treated conditions. Produced through longitudinal and transverse rolling, they can undergo creep flattening as a heat treatment to relieve internal stresses and meet specific flatness criteria. Plates can be supplied as cut blanks, i.e., intricately shaped parts derived from a parent plate. Further processing is tailored to customer requirements, whether mechanical or chemical.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheets
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 TitaniumSheets
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheets
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished leader in the metal industry, specializing in both small and large-scale titanium plate projects. With DAXUN, you gain not just a supplier but a trusted long-term partner dedicated to providing your business with premium titanium plates and comprehensive technical support. Consider DAXUN your strategic ally, committed to helping you navigate any challenges and fulfill your project goals with precision and confidence.
DAXUN's state-of-the-art service center in China ensures rapid order fulfillment with a robust inventory of titanium plate products. We enhance customer value through basic processing, water jet cutting, and plate nesting services, delivering significant time and cost savings.
Our commitment to continuous investment in production facilities and strategic capacity agreements with partners positions DAXUN at the pinnacle of titanium plate quality, both now and into the future.
Reach out to DAXUN today to receive the most competitive titanium plate prices and the latest technical insights.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN: Premier Manufacturer & Supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Titanium Plates in China! Our mission is to deliver top-tier, high-performance titanium alloy plates globally. We offer rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks and fabricates Grade 5 (UNS R56400) titanium plates in thicknesses from 0.5mm to 300mm: cold rolled (0.5mm-6.0mm), hot rolled (6.0-50mm), and forged (50mm+). Grade 5 (Ti-6Al-4V) titanium plates are the cornerstone of titanium materials, combining exceptional strength, ductility, and superior corrosion and high temperature resistance, making them ideal for diverse sectors, including general and military industries. Compliant with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 Titanium Plates: Versatile Applications in Aerospace, Military, Power, Vehicle Armor, Rocket Guidance, and Marine Industries.
Grade 1
DAXUN Alloys: Leading Global Producer & Supplier of Premium Grade 1 Titanium Plates.
Premium Grade 1 Titanium Plates: Exceptional Ductility and Cold Formability Ideal for Deep Drawing. Known for superior general and seawater corrosion resistance, titanium resists oxidizing, neutral, and mildly reducing environments, including chlorides. Lightweight (half density of nickel alloys), with high strength-to-weight ratio and corrosion resistance, making it perfect for challenging chemical conditions. Commercially pure Grade 1 titanium is the most ductile and softest, offering excellent cold formability, weldability, and impact hardness.
Leading Suppliers of ASTM B265 Titanium Gr 1 Plates: Hot Rolled, Cold Rolled, Patterned, Perforated, and Finished Sheets. Discover our extensive selection of Titanium Grade 1 Sheets and Plates, available for all your needs in China.
Grade 2
DAXUN stocks high-quality Grade 2 commercially pure titanium plates (UNS R50400), available in thicknesses from 0.5mm to 120mm. Grade 2 is the backbone of commercially pure titanium, offering a perfect balance of strength, ductility, and excellent corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plates: Your Go-To Material for Strength and Ductility. Boasting excellent impact strength and weldability, these plates are resistant to corrosion in oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. Their superb resistance extends to seawater and salt solutions.
Choose Grade 2 Titanium Plates for Their Low Density, High Strength-to-Weight Ratio, and Outstanding Corrosion Resistance. These plates are ideal for diverse applications, effectively resisting stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, they are the preferred alloy for most industrial applications requiring excellent ductility and corrosion resistance.
DAXUN: Your Metal Expert for Small and Large Titanium Plate Projects. As your trusted partner, we provide high-quality titanium plates and comprehensive technical support. Consider DAXUN not just a supplier, but your strategic partner, helping you navigate challenges and meet project goals successfully.
At Jiangsu Daxun Alloy Co., Ltd., our premier service center in China boasts a comprehensive inventory of titanium plate products, ensuring rapid order fulfillment. We elevate customer value through advanced services such as basic processing, precision water jet cutting, and meticulous plate nesting, all designed to optimize efficiency, reduce costs, and save valuable time.
With relentless investment in state-of-the-art production facilities and strategic capacity agreements with our esteemed partners, Jiangsu Daxun Alloy Co., Ltd. remains a pioneer in the realm of titanium plate manufacturing. Our commitment to innovation and quality ensures that we consistently deliver superior titanium plates, setting the benchmark for excellence today and in the future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today to discover the most competitive pricing and comprehensive technical information on our premium titanium plates. Our dedicated team is ready to assist you with expert guidance and support.
Q1: What products can you offer?
A: We provide a wide range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L. Additionally, we offer 300 and 400 series, duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products based on your drawings to ensure they meet your utmost satisfaction.
Q3. How does your factory manage quality control?
A: Quality is our top priority. We maintain stringent quality control measures from start to finish to ensure the highest standards.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can customize the form of packaging and transportation to suit your needs.
However, you will need to cover any additional costs and price differences incurred during this process.
Q5. How does your factory manage quality control?
A: Quality is our top priority. We maintain stringent quality control measures from start to finish to ensure the highest standards.
Q6. How long is the delivery time?
A: The delivery time is typically 7 to 20 working days after payment is confirmed.
If the order is urgent, we can expedite production to meet your deadline.
Q7. What are your payment terms?
A: We offer several payment options: 100% T/T in advance, Western Union for small orders, 30% T/T upfront with the remaining 70% before shipment, and 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, our material is suitable for deep drawing applications like stainless steel pots, sinks, and bowls. Please inform us of your specific usage, and we will adjust the mechanical properties accordingly.
Q9: How can I get a sample?
A: We offer FREE samples for your evaluation and testing. For small pieces, we may cover the courier cost depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to various countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}