| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Renowned as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) masterfully balances high strength, ductility, and exceptional corrosion resistance, serving a multitude of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate that strikes an impressive balance between strength and ductility. It boasts excellent impact strength and weldability, paired with outstanding corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, wet ***, and seawater. Its superb resistance extends to salt solutions, making it a versatile material for various demanding conditions.
Titanium's low density, high strength-to-weight ratio, and superior corrosion resistance make it the material of choice for diverse applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it stands as the preferred alloy for myriad industrial applications requiring robust ductility and corrosion resistance.
Grade 2 titanium plate, with its reduced density, is ideal for weight-sensitive scenarios. Key industries benefiting include medical, chemical equipment, and aerospace. Its strength and corrosion resistance also favor applications in marine, chemical processing, and desalination sectors. Typical uses span oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, and flue gas desulfurization systems. Common standards include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
Daxun ensures material suitability through rigorous quality assurance tests, including flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. Throughout production, we meticulously measure product diameter, thickness, and surface. Standard delivery is within 5-7 days, with special size products delivered in 15-20 days.
Titanium Grade 2 Plates are available in cold rolled thicknesses from 0.3 mm to 6.0 mm, supplied either hot rolled or heat treated. Hot rolled plates range from 4.76 mm to 155 mm and are produced by longitudinal and transverse rolling. If required, creep flattening can be employed as a heat treatment to relieve internal stresses and meet flatness specifications. Plates can be supplied in cut blank form, where parts with complex shapes are cut from a parent plate, allowing for further mechanical or chemical processing based on customer requirements.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is an expert in the realm of metals, specializing in both small and large titanium plate projects. As your go-to reference point and long-term partner, DAXUN is committed to supplying high-grade titanium plates and offering extensive technical support. Beyond merely being a supplier of industrial pure titanium plates and titanium alloy plates, DAXUN positions itself as a strategic partner dedicated to overcoming any challenges and fulfilling your specific needs, ensuring that your project goals are not just met, but exceeded.
Located in China, DAXUN's service center boasts an extensive stock of titanium plate products, ready for swift order processing. We enhance customer value through basic processing, precision water jet cutting, and expert plate nesting services, designed to save both time and costs for our clients.
DAXUN continually invests in its production facilities and maintains capacity agreements with key partners, ensuring that we remain at the pinnacle of titanium plate quality now and into the future.
Reach out to DAXUN today to receive the most up-to-date titanium plate prices and technical information tailored to your needs.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! With an ambition to craft the world's finest high-performance titanium alloy plates, we ensure swift global deliveries. Specializing in ASTM B265 Grade 2 and Grade 5 Titanium Plates, DAXUN maintains an extensive inventory of Grade 5 (UNS R56400) plates, available in thicknesses from 0.5mm to 300mm (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm+ forged). Renowned as the "workhorse" of titanium alloys, Grade 5 titanium plate (Ti-6Al-4V) boasts high strength, ductility, superb corrosion resistance, and high-temperature tolerance, making it ideal for diverse industries including general and military sectors. Fully compliant with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Ti-6Al-4V Grade 5 titanium plates are predominantly utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance systems, and marine applications.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of high-quality Grade 1 titanium plates.
Pure Grade 1 titanium plates boast exceptional ductility and cold formability, ideal for deep drawing applications. Known for its outstanding general and seawater corrosion resistance, Grade 1 titanium withstands oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), superior strength-to-weight ratio, and corrosion resistance make it an excellent choice for harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, with excellent cold formability, corrosion resistance, weldability, and impact hardness.
ASTM B265 Titanium Gr 1 Plate Producers, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, ASTM B265 Titanium Grade 1 Coil Suppliers, Pure Titanium Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates Dealers, Titanium Gr 1 Perforated Plates, Titanium Grade 1 Sheets and Plates Manufacturers in China.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. The Grade 2 Titanium Plate (UNS R50400) is recognized as the "workhorse" of the commercially pure titanium family, offering high strength, ductility, and excellent corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate stands out as a commercially pure titanium plate with a superb balance between strength and ductility. Boasting good impact strength, weldability, and excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***, it is also highly resistant to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance make it the material of choice for a broad spectrum of applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C, with a melting point of 1660°C, making it ideal for most industrial uses requiring good ductility and corrosion resistance.
DAXUN is your trusted metal expert, adept at handling both small and large titanium plate projects. As your long-term partner, DAXUN provides premium titanium plates and comprehensive technical support, positioning itself not merely as a supplier but as a strategic ally to help you overcome any challenges and achieve your project goals seamlessly.
Jiangsu Daxun Alloy Co., Ltd. (DAXUN) proudly offers unparalleled service with a comprehensive inventory of Advanced Grade 2 Titanium Sheets, ASTM B265 standard. Our service center in China stocks high-quality, corrosion-resistant titanium plates, ensuring rapid order processing to meet your immediate needs. By utilizing state-of-the-art techniques such as basic processing, precision water jet cutting, and efficient plate nesting, we deliver exceptional value to our customers. These services not only enhance product quality but also save you significant time and reduce costs, making DAXUN the ideal choice for your titanium requirements.
At Jiangsu Daxun Alloy Co., Ltd., continuous investment in our advanced production facilities and strategic capacity agreements with trusted partners keep us at the cutting edge of titanium plate manufacturing. This commitment ensures that DAXUN consistently delivers superior quality titanium plates, maintaining our leadership in the industry today and for years to come. Trust in DAXUN's relentless pursuit of excellence and innovation to meet all your titanium sheet needs with unparalleled quality and reliability.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today to discover the latest pricing and obtain detailed technical information on our Advanced Grade 2 Titanium Sheets, ASTM B265 standard. Our dedicated team is ready to provide you with comprehensive support and expert guidance, ensuring you receive the highest quality corrosion-resistant titanium plates tailored to your specific requirements. Contact DAXUN now and experience the exceptional service and product excellence that sets us apart.
Q1: What products can you offer?
A: We offer a comprehensive range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series, and 400 series stainless steels. Additionally, we provide duplex stainless steels such as 2205, 2304, 2101, 2507, etc., and high-nickel alloys like 904L, 800H, 600H.
Q2. Can you produce the products according to my own drawings?
A: Yes, we can manufacture products based on your drawings to meet your utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We consistently place great emphasis on quality control from the initial stages to the final production.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods according to your request,
although you will need to cover any additional costs and differences incurred during this change.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We consistently place great emphasis on quality control from the initial stages to the final production.
Q6. How long is the delivery time?
A: Delivery typically takes 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite the production process to meet your timeline.
Q7. What is your Payment?
A: 100% T/T in advance, Western Union (For Small Orders)
B: 30% T/T in advance and 70% balance before shipment
C: 100% Irrevocable LC at sight (For Large Orders)
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for making stainless steel pots, sinks, bowls, etc. Let us know your specific use case, and we will tailor the mechanical properties to meet your requirements.
Q9: How to get a sample?
A: FREE samples are available for your inspection and testing. If you need a small piece, we may cover the courier cost depending on the situation.
Q10: Which country have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and other countries.
Q11: How to visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}