Customization: | Available |
---|---|
Type: | Stainless Steel Bars |
Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Parameters: Stainless Steel rod | |
Material | 410 |
Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round Bars | Outside Diameter in the range of 4mm to 500mm |
Bright Bars | Outside Diameter in the range of 4mm to 100mm |
Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Length | 1 to 6 Meters, Custom Cut Lengths |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
Laboratory Test Certificate from Govt. Approved Lab. | |
Under Third Party Inspection | |
Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
ASTM A479 AISI 410 Stainless Steel Round Bar, ASTM A479 SS 410 Square Bar, 410 Stainless Steel Flat Bar, and Stainless Steel 410 Rod. We offer an extensive range of Stainless Steel 410 Round Bar, SS 410 Round Bar, and SS DIN 1.4006 Round Bar from top manufacturers. Purchase Stainless Steel 410 Bright Bar, 410 SS Polished Bar, and SS 410 Rod from leading suppliers. China AISI SS 410 Round Bar producers.
For more information on stainless steel rods, please contact Daxun.
410 Stainless Steel Rod Chemical Composition
UNS No | S41000 |
EN | 1.4006 |
AISI | 410 |
Carbon (C) | 0.08/0.15 |
Silicon (Si) | 1 |
Manganese (Mn) | 1 |
Phosphorus (P) | 0.04 |
*** (S) | 0.03 |
Chromium (Cr) | 11.5/13.5 |
Molybdenum (Mo) | |
Nickel (Ni) | 0.75 |
Property | Value |
Density | 7.8 g/cc |
Yield Strength | 1,225 MPa at a strain of 0.2% |
Ultimate Tensile Strength | 1,525 MPa |
Hardness | 126-192 Brinell hardness (annealed condition) 201-255 Brinell hardness (when hardened and tempered) |
Bulk Modulus | 200 GPa |
Melting Point | 1,480-1,530 °C |
Corrosion Resistance | Good corrosion resistance in mild atmospheric environments, water, and some mild chemical environments. It shows pitting corrosion and brown staining in salt water conditions and offers lower resistance to acidic environments than the austenitic stainless steel alternatives. |
Magnetism | Permeability 700-1,000. Highly responsive to magnetic fields, act as a strong magnetic flux carrier due to its martensitic structure. |
Density (lb./ in^2) @ RT | 0.28 | |
Modulus of Elasticity in Tension (psi x 10^6) | 29 | |
Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.11 |
Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 14.4 |
932oF | 16.6 | |
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 5.5 |
32 to 1,200oF | 6.5 | |
Electrical Resistivity (micro ohms - cm) | at 70oF | 22.5 |
Our forming capabilities include cutting-edge radial forging machines, advanced heat treatment furnaces, high-tech melting furnaces, and sophisticated rolling mills for titanium rods. We also utilize a unique hydroforming process for part manufacturing.
Our heat treatment of stainless steel rods employs advanced furnace equipment to ensure material stability and exceptional performance.
Using the world's most advanced vacuum induction furnace, vacuum consumable furnace, and electroslag furnace, Daxun Stainless Steel minimizes impurities during the smelting process, significantly enhancing the performance of our finished stainless steel rods.
Our stainless steel products are meticulously certified and fully traceable. We supply the highest-grade stainless steel to top-tier industries including aerospace, industrial, medical, marine, and military sectors.
Tensile Strength | Yield Strength | |||||||||||
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. | |||||
Grade | Tensile Str | Yield Str | Elong | Hardness | |
(MPa) min | 0.2% Proof | (% in 50mm) min | |||
(MPa) min | Rockwell B (HR B) max | Brinell (HB) max | |||
316 | 515 | 205 | 40 | 95 | 217 |
316L | 485 | 170 | 40 | 95 | 217 |
316H | 515 | 205 | 40 | 95 | 217 |
Tensile Strength | Yield Strength | ||||||||
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
(MPa) min | 0.2% Proof | (% in 50mm) min | |||
(MPa) min | Rockwell C (HR C) | Brinell (HB) | |||
UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
Grade | Property | Value |
2507/ S32750 |
Density (g/cm3) | 7.8 |
0.2% Offset Yield Strength | 80 ksi | |
Ultimate Tensile Strength | 116 ksi | |
0.1% Offset Yield Strength 0.2% | 91 ksi | |
Elongation in 2 inches, % | 15% | |
Hardness Rockwell C | 32 | |
Impact Energy | 74 ft.-lbs | |
Density | 0.28 lb per inch3 | |
Modulus of elasticity | 28 x 10(6) psi | |
Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of | |
Thermal conductivity | 8.7 Btu/hr ftoF | |
Heat capacity | 0.12 Btu/ lb oF | |
Electrical resistivity | 31.5 x10(-6) ohm-inch |
APPLICATIONS:
CORROSION RESISTANCE:
Features:
Available Stock Sizes:
For specific dimensions, visit product pages or contact us for a custom size quote.
410 stainless steel round bars are extensively used across various industries, from construction to automotive parts. To meet diverse needs, Daxun Alloys offers these bars in multiple grades and sizes. Our precision cutting service ensures your specific requirements are met with unparalleled accuracy.
Can you manufacture stainless steel grinding bars & rods?
Absolutely! We can produce stainless steel grinding bars & rods with precise dimensions, exceptional roundness, and straightness. These attributes make them superior to stainless steel polished bars, although the processing costs are higher.
Q1: What products can you offer?
A: We provide a comprehensive range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we offer 300 series steel.
400 series steels and duplex stainless steels such as 2205, 2304, 2101, 2507, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products based on your drawings, ensuring that they meet your exact specifications for utmost satisfaction.
Q3. How does your factory handle quality control?
Quality is our top priority. We place significant emphasis on quality control throughout the entire production process.
Q4. Can I request changes in the packaging and transportation methods?
Yes, we can modify the packaging and transportation methods according to your preferences,
however, you will need to cover any additional costs and potential price differences incurred during this period.
Q5. How does your factory handle quality control?
Quality is our top priority. We place significant emphasis on quality control throughout the entire production process.
Q6. What is the delivery time?
A: Typically, it takes 7 to 20 working days after payment confirmation.
For urgent orders, we prioritize and expedite the production process.
Q7. What are your payment terms?
A: 100% T/T in advance, Western Union for small orders.
B: 30% T/T in advance and 70% balance before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we specialize in DDQ materials suitable for stainless steel pots, sinks, bowls, etc. Inform us of your specific usage requirements, and we will adjust the mechanical properties accordingly.
Q9: How can I obtain a sample?
A: We provide FREE samples for your evaluation and testing. For small pieces, we may cover the courier costs, depending on the situation.
Q10: To which countries have you exported?
A: So far, we have exported our stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, UAE, Ukraine, and more.