| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a renowned Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier based in China! With our mission to create the world's highest-performance titanium alloy plates, we deliver swiftly across the globe - specializing in ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN proudly produces and stocks Grade 5 (UNS R56400) titanium plates with thicknesses ranging from 0.5mm to 300mm. Our plates are precisely categorized: 0.5mm-6.0mm as cold rolled, 6.0-50mm as hot rolled, and 50mm and above as forged. Known as the 'workhorse' of titanium alloys, Grade 5 titanium plate (Ti-6Al-4V) offers an extraordinary blend of high strength, ductility, exceptional corrosion resistance, and high-temperature durability, making it a preferred choice for both general and military industries. Our products are compliant with international standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate is composed of 90% titanium, 6% aluminum, and 4% vanadium. This α-β titanium alloy benefits from aluminum stabilizing the α phase and vanadium stabilizing the β phase. The Ti-6Al-4V plate shines with its excellent comprehensive performance and superior process efficiency. TC4 titanium alloy boasts outstanding room and high-temperature strength, impressive creep resistance, exceptional thermal stability, high fatigue performance, and superior *** growth resistance in seawater. It also offers satisfactory fracture toughness and hot salt stress corrosion performance. The plate's superb process plasticity and superplasticity make it ideal for various processing methods, including diverse welding and machining techniques.
The Ti-6Al-4V Grade 5 titanium plate finds its application in aerospace, military, power industry, vehicle armor, precision rocket guidance parts, marine industry, and more.
Grade 5 titanium alloy plate stands out as the most commercially utilized titanium alloy, showcasing an unparalleled combination of high strength and toughness. Ti-6Al-4V Grade 5 titanium alloy offers an extensive array of exceptional properties:
Ti-6AL-4V titanium plates and sheets are chiefly utilized for parts requiring corrosion resistance, stress corrosion resistance, high strength (400-450°C), and good ductility paired with lateral strength. Key applications include: 1. Jet engine components such as compressor blades, discs, rings, wings, fuselages, turbine discs, doors, bulkheads, and heat shields for military aircraft. 2. Military applications: armor, guidance systems, shell casings, etc. 3. Spacecraft components, including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment, such as bicycle frames and golf clubs. 6. Any other uses demanding a high strength-to-weight ratio.
Daxun implements stringent quality assurance tests, including flattening tests, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, expansion tests, and more. These tests guarantee the material's suitability for its intended applications. During production, we meticulously measure the product's diameter, thickness, and surface. Our standard delivery time is 5-7 days, while special size products require 15-20 days.
Delve into the precise chemical composition of our premium (Ti 6AL-4V) Grade 5 Titanium Sheet, meticulously engineered to meet stringent ASTM B265 standards.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Discover the essential chemical composition of our Grade 2 Titanium Sheet, crafted with precision and excellence.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Uncover the remarkable mechanical properties of our Grade 2 Titanium Sheet, designed for superior performance and reliability.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN, a renowned metal expert, specializes in both small and large-scale titanium plate projects. As your trusted reference point and long-term ally, DAXUN is dedicated to supplying premium titanium plates along with comprehensive technical support. More than just a supplier, DAXUN positions itself as your strategic partner, ready to tackle any challenge and fulfill all your requirements, ensuring your project's success.
At our cutting-edge service center in China, DAXUN maintains an extensive stock of titanium plate products for rapid order fulfillment. By offering basic processing, precise water jet cutting, and efficient plate nesting services, we deliver enhanced value to our customers, significantly reducing both time and costs.
With continuous investment in state-of-the-art production facilities and strategic capacity agreements with our partners, DAXUN remains at the pinnacle of titanium plate quality, both now and in the years to come.
Reach out to DAXUN today for the most competitive titanium plate prices and in-depth technical insights.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, your premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, is dedicated to crafting the world's highest-performance titanium alloy plates. We ensure swift global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we produce and stock Grade 5 (UNS R56400) titanium plates in thicknesses ranging from 0.5mm to 300mm. Our 0.5mm-6.0mm plates are cold rolled, 6.0-50mm are hot rolled, and anything above 50mm is forged. Grade 5 titanium plate (Ti-6Al-4V) is recognized as the 'workhorse' among titanium alloy materials, blending high strength, ductility, superior corrosion resistance, and high-temperature tolerance. This makes it an ideal choice for both general and military industries. Our plates comply with a wide range of standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate finds its primary applications in aerospace, military, power industries, vehicle armor, rocket precision guidance systems, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of high-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate is celebrated for its exceptional ductility and cold formability, making it perfect for deep drawing. Grade 1 titanium is renowned for its outstanding resistance to general and seawater corrosion, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. Titanium's low density, about half that of nickel-based alloys, combined with a high strength-to-weight ratio and corrosion resistance, makes it a top choice for diverse harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, excelling in cold formability, corrosion resistance, weldability, and impact hardness.
Leading the market as ASTM B265 Titanium Grade 1 Plate Producers, DAXUN offers a variety of Titanium Grade 1 products: Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. We are your trusted manufacturers and suppliers of Grade 1 titanium sheets and plates in China.
Grade 2
DAXUN is your go-to supplier for commercially pure titanium plates, Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is known as the 'workhorse' of commercially pure titanium, offering a well-balanced mix of high strength, ductility, and excellent corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium option, provides an excellent balance between strength and ductility. It boasts good impact strength, is easily weldable, and offers robust corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it excels in resisting seawater and salt solutions.
With its low density, high strength-to-weight ratio, and corrosion resistance, titanium is an ideal material for a myriad of applications. Grade 2 Titanium Plate is particularly effective in resisting stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Its melting point of 1660°C makes it the alloy of choice for most industrial applications requiring good ductility and corrosion resistance.
DAXUN, your trusted metal expert, is prepared to handle both small and large titanium plate projects. As your strategic partner, DAXUN provides not only industrial pure titanium plates and titanium alloy plates but also comprehensive technical assistance to ensure you meet your project goals. Trust DAXUN to support your business in overcoming any challenges and fulfilling your needs.
At DAXUN's premier service center in China, we maintain an extensive stock of top-quality titanium plates, ready for swift order processing. Leveraging advanced basic processing, precision water jet cutting, and efficient plate nesting techniques, we deliver exceptional value-added services. This not only enhances your project's efficiency but also significantly reduces both time and costs.
DAXUN's unwavering commitment to excellence is demonstrated by our ongoing investment in state-of-the-art production facilities and strategic capacity agreements with our trusted partners. These initiatives ensure that DAXUN consistently sets the standard for titanium plate quality, leading the industry both now and in the foreseeable future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical information. Let us provide you with the unparalleled expertise and quality that only DAXUN can offer.
){kind=link}