| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN proudly produces and stocks Grade 2 commercially pure titanium plates (UNS R50400), available in thicknesses from 0.5mm to 120mm. Known as the "workhorse" of the titanium family, Grade 2 combines high strength, ductility, and superior corrosion resistance, making it ideal for a multitude of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate offering an excellent balance of strength and ductility. With impressive impact strength and ease of weldability, it stands out for its exceptional corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing settings, and wet ***. It also excels in seawater and salt solutions.
Titanium's inherent low density, superior strength-to-weight ratio, and exceptional corrosion resistance render it ideal for diverse applications. It effectively combats stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a high melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for industrial applications requiring excellent ductility and corrosion resistance.
Grade 2 Titanium Plate, characterized by its lower density, is ideal for weight-sensitive applications. It serves key industries such as medical, chemical equipment, and aerospace. Its strength and corrosion resistance make it perfect for marine, chemical processing, and desalination applications. Typical uses include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Common standards include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
Daxun ensures top-notch quality with a series of rigorous tests such as flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. These guarantee the material's suitability for its intended application. During production, we meticulously measure the product's diameter, thickness, and surface. Our standard delivery time is 5-7 days, with a 15-20 day window for special size products.
Titanium Grade 2 Plates are available in cold-rolled thicknesses from 0.3 mm to 6.0 mm, and hot rolled or heat-treated conditions. Hot rolled plates range from 4.76 mm to 155 mm in thickness and are produced via longitudinal and transverse rolling. For special flatness requirements, creep flattening can be applied as a heat treatment. Plates can be supplied in cut blank forms for complex shapes, with further processing depending on customer requirements, either mechanically or chemically.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN, the metal expert par excellence, specializes in both small and large-scale titanium plate projects. As your ultimate reference point and long-term ally, DAXUN is dedicated to supplying top-notch titanium plates and providing comprehensive technical support tailored to your needs. Consider DAXUN not just as an industrial supplier of pure titanium and titanium alloy plates, but as a strategic partner committed to overcoming any challenges and fulfilling all your project requirements, ensuring the successful realization of your goals.
At DAXUN's state-of-the-art service center in China, a vast inventory of titanium plate products is readily available for rapid order fulfillment. By offering basic processing, precise water jet cutting, and efficient plate nesting services, we deliver unparalleled value to our customers, helping them save both time and money.
DAXUN's relentless investment in advanced production facilities, coupled with robust capacity agreements with our partners, guarantees that we remain at the cutting edge of titanium plate quality, today and in the future.
Reach out to DAXUN today to receive the most up-to-date pricing and technical information on our superior titanium plates.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier based in China! Our mission is to craft the world's most high-performance titanium alloy plates. We offer swift worldwide deliveries of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN holds an extensive inventory of Grade 5 (UNS R56400) alloy titanium plates, available in thicknesses from 0.5mm to 300mm (0.5mm-6.0mm is cold-rolled, 6.0-50mm is hot-rolled, and 50mm and above are forged). Grade 5 titanium plate (Ti-6Al-4V) stands as the 'workhorse' of titanium alloys, boasting high strength, remarkable ductility, and exceptional resistance to corrosion and high temperatures. This makes it highly favored across both general and military industries. Our products adhere to a multitude of standards, including ASTM, ASME, AMS, GB, GJB, MIL, JIS, and EN.
The Ti-6Al-4V Grade 5 Titanium Plate is predominantly utilized in aerospace, military, power industries, vehicle armoring, rocket precision guidance components, and the marine sector.
Grade 1
Today, DAXUN Alloys stands as a foremost global producer and supplier of superior quality Grade 1 Titanium Plate.
Pure Grade 1 titanium plate excels in ductility and cold formability, making it perfect for deep drawing. Known for its outstanding general and seawater corrosion resistance, Grade 1 titanium also withstands oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and corrosion resistance make it an excellent choice for a broad range of harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile titanium grade, renowned for its excellent cold formability, remarkable corrosion resistance, superior weldability, and good impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, and Suppliers of ASTM B265 Titanium Grade 1 Coils. We offer Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates, Gr 1 Perforated Plates, as well as Titanium Grade 1 Sheets and Plates. We are leading manufacturers based in China.
Grade 2
DAXUN produces and maintains a stock of commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the stalwart of the commercially pure titanium family. It offers a harmonious blend of high strength, ductility, and excellent corrosion resistance, making it suitable for numerous industrial applications.
The Grade 2 Titanium Plate is a commercially pure titanium plate that offers a superb balance between strength and ductility. With good impact strength and excellent weldability, it features robust corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also showcases outstanding resistance to seawater and saline solutions.
Titanium's low density, high strength-to-weight ratio, and exceptional corrosion resistance make it an ideal material for a wide array of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred choice for most industrial applications that demand excellent ductility and corrosion resistance.
DAXUN is a metal expert dedicated to both small and large titanium plate projects. As your go-to partner and long-term ally, DAXUN is committed to providing you and your business with high-quality titanium plates and any technical assistance you require. Consider DAXUN not only as your supplier of industrial pure titanium plates and titanium alloy plates but also as your strategic partner, ready to help you navigate any challenges and meet your needs, ultimately ensuring the success of your project goals.
At DAXUN's premier service center in China, we maintain a robust stock of titanium plate products for swift order fulfillment. With our comprehensive capabilities in basic processing, precise water jet cutting, and efficient plate nesting, we deliver exceptional value to our customers, significantly reducing their time and costs.
DAXUN's unwavering commitment to continuous investment in our cutting-edge production facilities, coupled with strategic capacity agreements with our esteemed partners, propels us to the pinnacle of titanium plate quality, now and for the future.
Reach out to DAXUN today to discover the most competitive pricing and in-depth technical insights on our titanium plate offerings.
Q1: What products can you offer?
A: We offer a wide range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series.
Additionally, we supply 400 series stainless steel and high-performance duplex stainless steel such as 2205, 2304, 2101, 2507, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products based on your drawings to ensure they meet your precise specifications.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We maintain strict quality control measures throughout the entire production process, from start to finish.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can customize the packaging and transport methods according to your requirements.
However, you will need to cover any additional costs and differences incurred during this process.
Q5. How does your factory do regarding quality control?
Quality is our top priority. We maintain strict quality control measures throughout the entire production process, from start to finish.
Q6. How long is the delivery time?
A: Delivery time ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite production to meet your timeline.
Q7. What is your Payment?
A: 100% T/T in advance, Western Union for small orders.
B: 30% T/T upfront and 70% balance before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Provide your usage details, and we will adjust the mechanical properties accordingly.
Q9: How to get a sample?
A: FREE samples are available for your inspection and testing. For small pieces, we may cover courier costs, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to countries such as Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}