| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN excels in producing and maintaining an extensive inventory of Grade 2 (UNS R50400) commercially pure titanium plates, with thicknesses spanning from 0.5mm to 120mm. Revered as the cornerstone of the commercially pure titanium series, Grade 2 seamlessly melds high strength, impressive ductility, and exceptional corrosion resistance, making it indispensable for numerous industrial applications.
Grade 2 Titanium Plate, embodying commercially pure titanium, strikes a perfect harmony between strength and ductility. Its remarkable impact strength and superior weldability are complemented by its robust corrosion resistance, rendering it ideal for harsh, oxidizing environments, alkaline media, brine solutions, mildly reducing surroundings, and wet *** exposure. Furthermore, its unmatched resilience against seawater and salt solutions makes it indispensable.
Renowned for its low density and an excellent strength-to-weight ratio, titanium is the go-to material for diverse applications. It's particularly effective against stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate stands as the premier alloy choice for demanding industrial applications requiring superior ductility and corrosion resistance.
Boasting a lower density, Grade 2 titanium plate is perfect for weight-sensitive applications. It shines in medical, chemical equipment, and aerospace industries, and its robust strength and corrosion resistance make it ideal for the marine, chemical processing, and desalination sectors. Typical applications span oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and several other industrial components. Adheres to standards such as ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
At Daxun, rigorous quality assurance tests, including flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests, ensure material suitability for all intended applications. Diameter, thickness, and surface dimensions are meticulously measured throughout production. Our standard delivery window is 5-7 days, with special size orders taking 15-20 days.
Titanium Grade 2 Plates come in cold rolled thicknesses from 0.3 mm to 6.0 mm. These plates are supplied in hot rolled or heat treated conditions. Additionally, hot rolled thicknesses range from 4.76 mm to 155 mm. Produced through longitudinal and transverse rolling, these plates can undergo creep flattening as a heat treatment to relieve internal stresses and meet specific flatness requirements. Plates can be delivered in cut blank form, tailored to complex shapes cut from a parent plate. Further mechanical or chemical processing depends on customer specifications.
About the chemical composition of (Ti 6AL-4V) Grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is your metal industry expert, specializing in both small and large-scale titanium plate projects. As your reliable reference point and long-term partner, DAXUN is committed to delivering superior titanium plates and comprehensive technical assistance for your business. Think of DAXUN not just as your supplier of industrial-grade pure titanium and titanium alloy plates, but as an invaluable strategic partner to navigate any challenge and fulfill any need you may face. With DAXUN by your side, achieving your project goals becomes a seamless reality.
DAXUN's state-of-the-art service center in China maintains a robust stock of titanium plate products, ensuring rapid order fulfillment. Our value-added services - including basic processing, precision water jet cutting, and efficient plate nesting - provide our customers with significant time and cost savings.
Through continuous investment in production facilities and strategic capacity agreements with our partners, DAXUN remains at the forefront of titanium plate quality, both now and for the future.
Reach out to DAXUN today for the latest updates on titanium plate prices and detailed technical information.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier based in China! Our mission is to develop the world's highest-performance titanium alloy plates. We offer rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN maintains a comprehensive inventory of Grade 5 (UNS R56400) titanium plates with thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and above 50mm forged). Grade 5 titanium plate (Ti-6Al-4V) is recognized as the 'workhorse' among titanium alloys due to its remarkable strength, ductility, excellent corrosion resistance, and high-temperature stability, making it a preferred choice in both general and military industries. Fully compliant with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN standards.
Ti-6Al-4V Grade 5 titanium plate is predominantly employed in aerospace, military sectors, power generation, vehicle armor, precision rocket guidance systems, and the marine industry.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts outstanding ductility and cold formability, making it well-suited for deep drawing applications. Grade 1 titanium is renowned for exceptional general and seawater corrosion resistance, as well as resistance to oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), coupled with a high strength-to-weight ratio and robust corrosion resistance, makes it an ideal choice for various challenging chemical environments. Commercially pure Grade 1 titanium is the most malleable and ductile of the titanium grades, offering excellent cold formability, superb corrosion resistance, outstanding weldability, and notable impact hardness.
ASTM B265 Titanium Gr 1 Plate Producers, Titanium Gr 1 Sheets, Finished Titanium Gr 1 Plates, ASTM B265 Titanium Grade 1 Coil Suppliers, Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates Dealers, Titanium Gr 1 Perforated Plates, and Manufacturers of Titanium Grade 1 Sheets and Plates in China.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the 'workhorse' of the commercially pure titanium category, providing a superb balance of strength, ductility, and excellent corrosion resistance, suitable for numerous industrial uses.
Grade 2 Titanium Plate is a commercially pure titanium plate offering an exceptional balance of strength and ductility. It features notable impact strength and is easily weldable. It delivers excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing settings, and wet ***, as well as outstanding seawater and salt solution resistance.
Titanium's low density, robust strength-to-weight ratio, and superior corrosion resistance make it ideal for a wide range of applications. It effectively withstands stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for industrial applications requiring excellent ductility and corrosion resistance.
DAXUN is a trusted metal specialist adept at handling both small and large titanium plate projects. DAXUN serves as your reliable reference point and long-term partner, ready to deliver titanium plates and provide any technical assistance your business may require. Consider DAXUN not only as your supplier of industrial pure titanium plates and titanium alloy plates but also as your strategic ally, committed to helping you overcome any challenges and meet your business objectives, ensuring the success of your projects.
At DAXUN's premier service center in China, we maintain a comprehensive inventory of titanium plate products, enabling swift order fulfillment. Our advanced processing techniques, including water jet cutting and precise plate nesting, ensure that we deliver exceptional value to our customers by significantly reducing their time and cost expenditures.
DAXUN continually invests in state-of-the-art production facilities and secures robust capacity agreements with our strategic partners. This relentless commitment ensures that DAXUN remains a leader in titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and detailed technical information. Experience the unparalleled quality and service that sets us apart.
Q1: What products can you offer?
A: We proudly offer a diverse range of superior steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L.
400 series, as well as duplex stainless steels like 2205, 2304, 2101, and 2507. Moreover, we supply high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can custom-produce products based on your drawings to ensure your utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We consistently emphasize rigorous quality control measures from start to finish.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods to suit your requirements,
but you'll need to cover any additional costs and differences incurred.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We consistently emphasize rigorous quality control measures from start to finish.
Q6. How long is the delivery time?
A: Typically, delivery takes 7-20 working days after payment confirmation.
If the order is urgent, we will expedite the process to meet your schedule.
Q7. What are your payment terms?
A: 100% T/T in advance, Western Union (for small orders).
B: 30% T/T upfront and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight (for large orders).
Q8: Can you produce Deep Drawing Quality (DDQ) material?
A: Yes, we can. Our materials are ideal for products such as stainless steel pots, sinks, and bowls. Inform us of your specific use, and we will adjust the mechanical properties to meet your needs.
Q9: How can I obtain a sample?
A: FREE samples are available for your evaluation. For small pieces, we can cover the courier cost, depending on the situation.
Q10: Which countries have you exported your materials to?
A: To date, we've exported our stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}