| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
At DAXUN, we specialize in and maintain an extensive inventory of commercially pure titanium plates, specifically Grade 2 (UNS R50400), with thicknesses spanning from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) stands as the versatile cornerstone in the pure titanium category, delivering a powerful blend of high strength, exceptional ductility, and impressive corrosion resistance across a multitude of industrial applications.
The Grade 2 Titanium Plate is an epitome of commercially pure titanium, striking an excellent harmony between strength and ductility. It boasts remarkable impact strength and offers seamless weldability. Exhibiting robust corrosion resistance, it excels in highly oxidizing environments, alkaline media, brine solutions, and moderately reducing scenarios, including wet ***. Furthermore, its outstanding resilience extends to seawater and salt solutions.
With a low density, a high strength-to-weight ratio, and inherent corrosion resistance, titanium emerges as the quintessential material for diverse applications. It excels in resisting stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. The Grade 2 Titanium Plate, with its melting point of 1660°C, is the preferred alloy for industrial needs demanding superior ductility and corrosion resistance.
The Grade 2 titanium plate's reduced density renders it optimal for weight-sensitive applications. Its strength and corrosion resistance position it as an ideal choice for sectors such as medical, chemical equipment, and aerospace. Additionally, industries like marine, chemical processing, and desalination benefit greatly from its properties. Common applications include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and various other industrial components. Adhering to stringent standards such as ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
At Daxun, we undertake a comprehensive suite of quality assurance tests, including flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. These rigorous evaluations ensure the material's suitability for intended applications. Throughout production, we meticulously measure diameter, thickness, and surface attributes. Our standard delivery window is 5-7 days, extending to 15-20 days for custom-sized products.
Titanium Grade 2 Plates are available in cold-rolled thicknesses from 0.3 mm to 6.0 mm, and in hot-rolled or heat-treated conditions from 4.76 mm to 155 mm. Produced through longitudinal and transverse rolling, these plates can undergo creep flattening as a heat treatment to alleviate internal stresses and meet specific flatness criteria. Plates can be customized into complex shapes cut from a parent plate, with further mechanical or chemical processing based on customer requirements.
Chemical Composition Insights of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN, a distinguished authority in metallurgy, specializes in both small and large-scale titanium plate endeavors. As your definitive reference point and committed partner, DAXUN is dedicated to supplying your business with premium titanium plates and comprehensive technical assistance. Beyond merely being a supplier of industrial pure titanium and titanium alloy plates, DAXUN stands as your strategic ally, ready to support you in overcoming any challenges and fulfilling your project requirements, ultimately ensuring the successful realization of your goals.
At DAXUN's state-of-the-art service center in China, we maintain a robust inventory of titanium plate products for expedited order processing. By offering fundamental processing, precision water jet cutting, and efficient plate nesting, we deliver exceptional value to our customers, significantly reducing their time and expenses.
Through continuous investment in our production facilities and strategic capacity agreements with partners, DAXUN secures its position at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical information.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a renowned Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, is committed to creating world-class high-performance titanium alloy plates. With rapid worldwide delivery, we offer ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our Grade 5 titanium plates (UNS R56400) are available in thicknesses from 0.5mm to 300mm: 0.5mm-6.0mm is cold-rolled, 6.0-50mm is hot-rolled, and above 50mm is forged. Grade 5 titanium (Ti-6Al-4V) is renowned for its high strength, ductility, and exceptional corrosion and high-temperature resistance, making it the preferred choice for both general and military industries. Compliance standards include: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate plays a crucial role in aerospace, military industry, power sector, vehicle armor, rocket precision guidance systems, marine industry, and beyond.
Grade 1
Today, DAXUN Alloys stands tall as a leading global producer and supplier of top-quality Grade 1 titanium plates.
The commercially pure Grade 1 titanium plate exhibits superior ductility and cold formability, making it ideal for deep drawing applications. Known for its excellent general and seawater corrosion resistance, Grade 1 titanium also withstands oxidizing, neutral, and mildly reducing solutions, including chlorides. Its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and outstanding corrosion resistance make it a premier choice for harsh chemical environments. As the softest and most ductile of commercially pure grades, it exhibits excellent cold formability, corrosion resistance, weldability, and impact hardness.
We are renowned producers of ASTM B265 Titanium Gr 1 Plates, including sheets, finished plates, coils, hot rolled plates, cold rolled plates, and patterned and perforated plates. As leading manufacturers in China, we cater to all your Grade 1 titanium sheet and plate needs.
Grade 2
DAXUN specializes in producing and stocking commercially pure titanium plates, Grade 2 (UNS R50400), in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the backbone of the commercially pure titanium family, blending high strength, ductility, and excellent corrosion resistance for diverse industrial uses.
Grade 2 Titanium Plate boasts an outstanding balance of strength and ductility. It offers excellent impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing media, and wet ***. Its resistance to seawater and salt solutions is exemplary.
With its low density, high strength-to-weight ratio, and exceptional corrosion resistance, titanium is ideal for a myriad of applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, it is the alloy of choice for industrial applications necessitating robust ductility and corrosion resistance.
DAXUN is your metal expert for both small and large titanium plate projects. As your reference point and long-term partner, DAXUN is ready to provide titanium plates and technical assistance to help you meet and exceed your project goals. Consider DAXUN not just as a supplier of industrial pure titanium plates and titanium alloy plates, but as a strategic partner dedicated to overcoming any challenges and fulfilling your specific needs, ensuring the realization of your project ambitions.
At DAXUN's premier service center in China, we maintain a ready stock of titanium plate products, ensuring rapid order processing. By offering a range of value-added services, including precise water jet cutting, efficient plate nesting, and basic processing, we empower our customers to save both time and costs, enhancing their overall experience.
DAXUN's unwavering commitment to continuous investment in our advanced production facilities, combined with strategic capacity agreements with esteemed partners, positions us as a leading innovator in titanium plate quality, both now and into the future.
Reach out to DAXUN today to access the most competitive prices and up-to-date technical information on our superior titanium plates.
Q1: What products can you offer?
A: We proudly offer an array of high-grade steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L 300 series.
Additionally, we provide 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2: Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products strictly following your drawings to ensure maximum satisfaction.
Q3: How does your factory maintain quality control?
A: Quality is our utmost priority. We implement rigorous quality control measures from the initial stages through to the final product to ensure excellence.
Q4: Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods as per your request.
However, you will need to cover any additional costs and differences incurred during this period.
Q5: How does your factory maintain quality control?
A: Quality is our utmost priority. We implement rigorous quality control measures from the initial stages through to the final product to ensure excellence.
Q6: How long is the delivery time?
A: The delivery time is generally 7 to 20 working days after payment confirmation.
If the order is urgent, we will expedite production to meet your timeline.
Q7: What are your payment terms?
A: Payment can be made in the following ways:
B: 30% T/T in advance, with the balance of 70% before shipment
C: 100% Irrevocable LC at sight (for large orders)
Q8: Can you provide Deep Drawing Quality (DDQ) material?
A: Yes, we can. Our materials are suitable for manufacturing stainless steel pots, sinks, bowls, etc. Provide your specific use, and we will tailor the mechanical properties accordingly.
Q9: How can I obtain a sample?
A: Free samples are available for inspection and testing. For smaller pieces, we might cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}