High Quality Titanium Alloy Plate Gr5 Ti 6al 4V Gr7 Gr9 Gr23 Alloy Titanium Plate ASME Sb 265 High Performance Titanium Plate

• Type: Titanium Sheets
• Application: Industrial
• Technique: Hot Rolled
• Grade: Gr5 Ti-6al-4V Gr7 Gr9 Gr23
• Shape: Square
• Thickness: 0.3mm-120mm
• Model NO.: Titanium Alloy Plate
• Transport Package: Wooden Pallet
• Specification: 1000mm/1200mm/1500mm/2000mm
• Trademark: Daxun
• Origin: China
• Production Capacity: 1000ton

Product Description

Product Description

Product Parameters

 

Titanium Plate and sheet Type	Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Grade	ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS
Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length	1000mm-13000mm or as required
Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width	1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required
UNS Plate Thickness	0.3 to 120mm or as required
ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process	Hot/ Cold Rolled/forging
UNS  Plate surface	No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip	JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc
	DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc
Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM	ASTM B265
Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS	AMS 4902
Tolerances of width and thickness	EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general)
Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals	EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID

 

Detailed Photos

At Daxun, our titanium sheets are produced within China, meticulously crafted to meet the diverse and demanding needs of our esteemed customers!

DAXUN is your trusted source for commercially pure titanium plates Gr1 Gr2 Gr3 Gr4 (UNS), available in a vast range of thicknesses from 0.5 mm to 120 mm. These Gr1 Gr2 Gr3 Gr4 titanium plates (UNS) are the true workhorses in the commercially pure titanium family, boasting high strength, exceptional ductility, and outstanding corrosion resistance, making them perfect for a myriad of industrial applications.

Our Gr1 Gr2 Gr3 Gr4 titanium plates are renowned for their superior balance of strength and ductility. With excellent impact strength and ease of welding, these plates offer superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. Their remarkable resistance extends to seawater and salt solutions, ensuring durability in the harshest conditions.

The Gr5 grade 5 Ti-6Al-4V titanium alloy plate is a marvel in metallurgy. Comprising 90% titanium, 6% aluminum, and 4% vanadium, this α-β type titanium alloy is stabilized by aluminum in the α phase and vanadium in the β phase. The Gr5 Ti-6Al-4V plate boasts exceptional comprehensive performance and processing capabilities. It excels in both room temperature and high-temperature strength, creep resistance, thermal stability, fatigue performance, and *** growth resistance in seawater. Additionally, it features satisfactory fracture toughness and resistance to hot salt stress corrosion, along with superb process plasticity and superplasticity, making it versatile for various processing, welding, and machining methods.

 

Diverse Applications and Rigorous Standards

Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plates are lightweight yet exceptionally strong, making them perfect for applications where weight is a critical factor. These plates find their place in military, medical, chemical equipment, and aerospace industries. Their unmatched strength and corrosion resistance extend their utility to marine, chemical processing, and desalination sectors. Typical applications include oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, and flue gas desulfurization systems, among other industrial components. Adherence to standards such as ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972 ensures top-notch quality.

 

Unparalleled Corrosion Resistance

Gr1 Gr2 Gr3 Gr4 Gr5 titanium plates exhibit outstanding resistance to seawater and marine atmospheric corrosion. While the four commercially pure grades share similar corrosion resistance, their mechanical properties vary based on oxygen and iron content. These plates are resilient against wet chlorides, metal chlorides, chlorite, hypochlorite solutions, nitric and chromic acids, organic acids, and many gases used in industrial settings.

 

 

Intricate Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet

Chemical Composition:
Symbol	Element	Min %	Max %
Al	Aluminum	5.50%	6.75%
V	Vanadium	3.50%	4.50%
Fe	Iron		0.30%
O	Oxygen		0.20%
C	Carbon		0.08%
N	Nitrogen		0.05%
H	Hydrogen		0.01%
Y	Yttrium		0.01%
	Other, each		0.10%
	Other, total		0.40%
Ti	Titanium		Remainder

 

Comprehensive Insights into the Mechanical Properties of (Ti 6AL-4V) Grade 5 Titanium Sheet

Physical Properties	Metric	English	Comments
Density	4.43 g/cc	0.16 lb/in³
Mechanical Properties
Hardness, Brinell	334	334	Estimated from Rockwell C.
Hardness, Knoop	363	363	Estimated from Rockwell C.
Hardness, Rockwell C	36	36
Hardness, Vickers	349	349	Estimated from Rockwell C.
Tensile strength	min. 895MPa	129810 psi
Yield strength	min. 828MPa	120090 psi
Elongation at Break	min.10 %	10 %
Reduction of Area	min.25 %	25 %

 

In-depth Analysis of the Chemical Composition of Grade 2 TitaniumSheet

Element	Weight %
C	≤0.08
O	≤0.25
N	≤0.03
H	≤0.015
Fe	≤0.30
*OEE	≤0.10
*OET	≤0.40
Ti	Remaining

 

Exploring the Mechanical Properties of Grade 2 Titanium Sheet

Alloy	UNS Designation	Spec.	Tensile Strength (min.)			Yield Strength 0.2% Offset (min.)			Elongation in 2 inches (min.)	Max Hardness	Modulus of Elasticity (x106 psi)	Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6)	Thermal Conductivity (BTU-in/ft2-h-°F)
			psi	MPa	ksi	psi	MPa	ksi	%
Grade 2 Titanium	R50400	B338	50,000	-345	50	40,000-	(276-448)	40-65	20	-	16	5.1	144
						50,000

 

Comprehensive Breakdown of the Chemical Composition of Grade 1 TitaniumSheet

Element	Minimum (weight %)	Maximum (weight %)	Typical (weight %)
Fe		0.2
O		0.18
C		0.08
N		0.03
H		0.015
Ti	Balance

 

Understanding the Mechanical Properties of Grade 1 Titanium Sheet

Density
lb/in3	g/cm3
0.163	4.51
Tensile Strength
ksi	MPa
35 min	240 min
Yield Strength
ksi	MPa
20 min	138 min
Hardness
70 HRC max
Elongation
24% min

 

Detailed Chemical Composition of 3Al-2.5V TitaniumSheet

Element	Minimum (weight %)	Maximum (weight %)	Typical (weight %)
Al	2.5	3.5
V	2.0	3.0
Fe		0.25
O		0.15
C		0.08
N		0.03
H		0.015
Ti	Balance

Packaging & Shipping

Company Profile

Introduction to Titanium Plate Manufacturing Process

1. Cold-Rolled Titanium Plate: This premium plate is crafted through meticulous plate rolling, with the final step being cold rolling. Our sheets are delivered either in a work-hardened or heat-treated state, tailored to meet your specific requirements. Further processing, whether mechanical or chemical, is customized based on your needs. 2. Hot-Rolled Titanium Plate: Manufactured through precise longitudinal rolling, as well as longitudinal and transverse rolling, this plate offers a thickness range from 3.0mm to 155mm. Delivered in a heat-treated condition, it can undergo creep flattening to eliminate internal stresses and achieve exceptional flatness. Available as cut blanks, these plates can be shaped into complex parts from the parent metal, with further processing tailored to your specifications.3. Forged Titanium Plate: Produced through forging the steel ingot on a vertical hydraulic press followed by rolling, or using open die forging, our forged titanium plates boast impressive dimensions: thickness up to 580 mm, width up to 2000 mm, and length up to 6000 mm. The dimensions and weight are customized to meet your specific requirements, ensuring a perfect fit for your needs.

No matter the type of titanium plate you require, Daxun delivers with unparalleled efficiency and precision.
Available in numerous alloys, widths, thicknesses, and lengths, our titanium plates are designed to fulfill your distinct needs with utmost excellence.

Certifications

CP GR1 Titanium plate PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.50 g/cc	0.163 lb/in³
a Lattice Constant	2.95 Å @Temperature 25.0 °C	2.95 Å @Temperature 77.0 °F	alpha phase
	3.29 Å @Temperature 900 °C	3.29 Å @Temperature 1650 °F	beta phase
c Lattice Constant	4.683 Å	4.683 Å @Temperature 77.0 °F	c/a = 1.587
Mechanical Properties	Metric	English	Comments
Hardness, Brinell	120	120	annealed
Hardness, Knoop	132	132	Estimated from Brinell.
Hardness, Rockwell B	70	70	annealed
Hardness, Vickers	122	122	Estimated from Brinell.
Tensile Strength	124 - 138 MPa @Temperature 427 °C	18000 - 20000 psi @Temperature 801 °F
	152 - 179 MPa @Temperature 316 °C	22000 - 26000 psi @Temperature 601 °F
	193 - 207 MPa @Temperature 204 °C	28000 - 30000 psi @Temperature 399 °F
Tensile Strength, Ultimate	240 MPa	34800 psi
Tensile Strength, Yield	170 - 310 MPa	24700 - 45000 psi
	76.0 - 90.0 MPa @Temperature 427 °C	11000 - 13100 psi @Temperature 801 °F	0.2% offset
	83.0 - 103 MPa @Temperature 316 °C	12000 - 14900 psi @Temperature 601 °F	0.2% offset
	110 - 124 MPa @Temperature 204 °C	16000 - 18000 psi @Temperature 399 °F	0.2% offset
Elongation at Break	24%	24%
	25 - 30 % @Temperature 427 °C	25 - 30 % @Temperature 801 °F
	30 - 35 % @Temperature 316 °C	30 - 35 % @Temperature 601 °F
	40 - 50 % @Temperature 204 °C	40 - 50 % @Temperature 399 °F
Reduction of Area	35%	35%
Tensile Modulus	103 GPa	14900 ksi
Compressive Modulus	110 GPa	16000 ksi
Poissons Ratio	0.37	0.37
Shear Modulus	45.0 GPa	6530 ksi
Charpy Impact	310 J	229 ft-lb	V-notch
Impact Test	136 J	100 ft-lb	Impact Strength
Coefficient of Friction, Dynamic	0.68	0.68	Ti sliding on Ti; 300 m/min
	0.8	0.8	Ti sliding on Ti; 40 m/min

 

CP GR2 Titanium plate PHYSICAL PROPERTIES
Density	Magnetic Permeability
0.163 lbs/in-3	Nonmagnetic
4.51 g/cm-3	Electrical Resistivity
Beta Transus (+/-25°F, +/--3.9°C)	21 µΩ/in
1680°F	0.53 µΩ/m
915°C	Elastic Modulus
Thermal Conductivity	15.2-17.4 Msi
12.60 BTU hr-1ft-1 °F-1	105-120 GPa
21.79 W m-1 °C-1	Typical values at room temperature of about 68-78°F (20-25°C)

 

GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.43 g/cc	0.16 lb/in³
Mechanical Properties
Hardness, Brinell	334	334	Estimated from Rockwell C.
Hardness, Knoop	363	363	Estimated from Rockwell C.
Hardness, Rockwell C	36	36
Hardness, Vickers	349	349	Estimated from Rockwell C.
Tensile strength	min. 895MPa	129810 psi
Yield strength	min. 828MPa	120090 psi
Elongation at Break	min.10 %	10 %
Reduction of Area	min.25 %	25 %
Modulus of Elasticity	113.8 GPa	16500 ksi
Compressive Yield Strength	970 MPa	141000 psi
Notched Tensile Strength	1450 MPa	210000 psi	Kt (stress concentration factor) = 6.7
Ultimate Bearing Strength	1860 MPa	270000 psi	e/D = 2
Bearing Yield Strength	1480 MPa	215000 psi	e/D = 2
Poisson's Ratio	0.342	0.342
Charpy Impact	17 J	12.5 ft-lb	V-notch
Fatigue Strength	240 MPa	34800 psi	at 1E+7 cycles. Kt (stress concentration factor) = 3.3
Fatigue Strength	510 MPa	74000 psi	Unnotched 10,000,000 Cycles
Fracture Toughness	75 MPa-m½	68.3 ksi-in½
Shear Modulus	44 GPa	6380 ksi
Shear Strength	550 MPa	79800 psi	Ultimate shear strength
Electrical Properties
Electrical Resistivity	0.000178 ohm-cm	0.000178 ohm-cm
Magnetic Permeability	1.00005	1.00005	at 1.6kA/m
Magnetic Susceptibility	3.30E-06	3.30E-06	cgs/g
Thermal Properties
CTE, linear 20°C	8.6 µm/m-°C	4.78 µin/in-°F	20-100ºC
CTE, linear 250°C	9.2 µm/m-°C	5.11 µin/in-°F	Average over the range 20-315ºC
CTE, linear 500°C	9.7 µm/m-°C	5.39 µin/in-°F	Average over the range 20-650ºC
Specific Heat Capacity	0.5263 J/g-°C	0.126 BTU/lb-°F
Thermal Conductivity	6.7 W/m-K	46.5 BTU-in/hr-ft²-°F
Melting Point	1604 - 1660 °C	2920 - 3020 °F
Solidus	1604 °C	2920 °F
Liquidus	1660 °C	3020 °F
Beta Transus	980 °C	1800 °F

A global leader in high-performance Ti-6Al-4V Grade 5 titanium plate manufacturing services.

Grade 5

DAXUN is a premier Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Our mission is to craft the world's finest high-performance titanium alloy plates and ensure rapid global delivery. We offer ASTM B265 Grade 2 and Grade 5 titanium plates, available in thicknesses from 0.5mm to 300mm. Our plates are categorized as follows: 0.5mm-6.0mm (cold rolled), 6.0-50mm (hot rolled), and above 50mm (forged). Grade 5 titanium plate (Ti-6Al-4V) is renowned as the 'workhorse' of titanium alloy materials, boasting exceptional strength, ductility, and corrosion resistance. Its high-temperature resilience makes it a preferred choice in both general and military sectors. Our products comply with multiple standards, including ASTM, ASME, AMS, GB, GJB, MIL, JIS, and EN.

Ti-6Al-4V Grade 5 titanium plates are extensively utilized in aerospace, military, power, vehicle armor, rocket guidance systems, and marine industries.

Grade 1

Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.

Pure Grade 1 titanium plates excel in ductility and cold formability, perfect for deep drawing applications. Grade 1 titanium's superior general and seawater corrosion resistance, coupled with its resilience in oxidizing, neutral, and mildly reducing media (including chlorides), makes it ideal for harsh chemical environments. The low density (about half of nickel-based alloys), high strength-to-weight ratio, and corrosion resistance of Grade 1 titanium make it an excellent choice. As the softest and most ductile commercially pure titanium, it boasts impressive cold formability, corrosion resistance, weldability, and impact hardness.

We offer ASTM B265 Titanium Gr 1 Plates, including finished sheets, coils, hot rolled plates, cold rolled plates, patterned and perforated sheets. As leading manufacturers in China, we provide comprehensive solutions for your titanium plate needs.

Grade 2

DAXUN produces and maintains an extensive stock of commercially pure Grade 2 titanium plates (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 titanium plates are the 'workhorse' of commercially pure titanium, offering a superb balance of strength, ductility, and corrosion resistance suitable for various industrial applications.

Grade 2 Titanium Plates are commercially pure and known for their excellent strength and ductility balance. They offer impressive impact strength and weldability, along with superb corrosion resistance in oxidative environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Notably, they exhibit excellent resistance to seawater and salt solutions.

With a low density, high strength-to-weight ratio, and impressive corrosion resistance, Grade 2 Titanium Plates are ideal for a wide range of applications. They effectively resist stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is preferred for most industrial applications requiring good ductility and corrosion resistance.

DAXUN is your ultimate partner for both small and large titanium plate projects. As a trusted expert, we provide high-quality titanium plates and comprehensive technical support. Consider DAXUN not just a supplier but a strategic partner dedicated to helping you overcome challenges and achieve your project objectives.

At Jiangsu Daxun Alloy Co., Ltd., our service center in China boasts a comprehensive stock of high-quality Titanium Alloy Plate Gr5 Ti-6al-4V, conforming to ASTM B265 standards, ready for swift order fulfillment. Leveraging advanced processing techniques such as water jet cutting and precise plate nesting, we deliver exceptional value to our clients, significantly reducing their time and expenses.

DAXUN's unwavering commitment to continuous investment in state-of-the-art production facilities, coupled with strategic capacity agreements with our esteemed partners, positions us as a leader in the titanium plate industry, ensuring unparalleled quality both now and in the future.

Reach out to Jiangsu Daxun Alloy Co., Ltd. today to discover the most competitive prices and comprehensive technical details for our Titanium Alloy Plate Gr5 Ti-6al-4V.

FAQ

 

Q1: What products can you offer?

A: We can offer you a wide range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and the 300 series.
Additionally, we provide 400 series, duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.

Q2. Can you produce the products according to my own drawings?

Yes, we can manufacture products precisely according to your drawings to ensure your utmost satisfaction.

Q3. How does your factory do regarding quality control?

Quality is our top priority. We always place great importance on quality control from the very beginning to the final stages.

Q4. Can I request to change the form of packaging and transportation?

Yes, we can adjust the form of packaging and transportation as per your request,
though you will need to bear any additional costs and the difference in expenses incurred during this period.


Q5. How does your factory do regarding quality control?

Quality is our primary concern. We meticulously control quality from start to finish.

Q6. How long is the delivery time?

A: Delivery time is typically 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite production to meet your timeline.

Q7. What is your Payment?

A: 100% T/T in advance, Western Union (for small orders)

B: 30% T/T with the balance 70% due before shipment

C: 100% Irrevocable LC at sight (for large orders)

Q8: Can you make DDQ (Deep Drawing Quality)?

A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Let us know your specific usage, and we will adjust the mechanical properties to meet your requirements.

Q9: How to get a sample?

A: FREE samples are available for your inspection and testing. If you need a small piece, we may cover the courier costs, depending on the situation.

Q10: To which countries have you exported?

A: To date, we have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and others.

Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.