| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the "workhorse" of the commercially pure titanium family. It combines high strength, ductility, and excellent corrosion resistance for many industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate. It offers an excellent balance between strength and ductility. It has good impact strength and is easily weldable. It has good corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also has excellent resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance make it an ideal material for a wide range of applications, and it effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for most industrial applications requiring good ductility and corrosion resistance.
Grade 2 titanium plate has a lower density, making it ideal in situations where weight is a concern. Medical, chemical equipment, and aerospace are a few key industries for titanium alloys. The strength and corrosion resistance of grade 2 titanium plate also make it ideal for applications in the marine, chemical processing, and desalination industries. Typical applications for grade 2 titanium alloys include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and many other industrial components.Common standards:ASTM B265, ASTM F67, AMS4911,AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972,
Daxun conducts multiple quality assurance tests, these tests include flattening test, pitting and resistance test, mechanical test, hardness test, material positive identification, expansion test, etc. All these tests ensure that the material is suitable for the required application. During the production process, we measure the diameter, thickness and surface of the product. Our standard delivery time is 5-7 days, and the delivery time for special size products is 15-20 days.
Titanium Grade 2 Plates are available in cold rolled thicknesses from 0.3 mm to 6.0 mm. Plates are supplied in hot rolled or heat treated condition. Titanium Grade 2 Plates are available in hot rolled thicknesses from 4.76 mm to 155 mm. The plates are produced by longitudinal and transverse rolling. Plates are supplied in hot rolled or heat treated condition. If necessary, creep flattening can be used as a heat treatment (to relieve internal stresses and to meet special flatness requirements). Plates can be supplied in cut blank form, i.e. parts with complex shapes are cut from a parent plate. Further processing depends on the customer's requirements and can be either mechanical or chemical.
About the chemical composition of(Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert specializing in both small and large titanium plate projects. As your go-to reference and steadfast long-term partner, DAXUN is poised to supply your business with top-quality titanium plates and comprehensive technical assistance. Beyond being a mere supplier of industrial pure titanium plates and titanium alloy plates, DAXUN stands as your strategic ally, ready to navigate any challenges and fulfill any needs you may encounter. Our unwavering commitment is to ensure you reach your project goals with unparalleled efficiency and success.
DAXUN's state-of-the-art service center in China houses an extensive inventory of titanium plate products, ready for rapid order processing. Leveraging basic processing, precision water jet cutting, and sophisticated plate nesting solutions, we add significant value for our customers, effectively saving both time and costs.
Through continuous investment in our production facilities and strategic capacity agreements with our partners, DAXUN is dedicated to maintaining its leadership in titanium plate quality, both now and in the future.
Reach out to DAXUN today for the latest prices on titanium plates and comprehensive technical information tailored to your needs.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a distinguished manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates, based in China. Our mission is to produce the world's finest high-performance titanium alloy plates. We offer rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN specializes in alloy titanium plates Grade 5 (UNS R56400) with thicknesses spanning from 0.5mm to 300mm. Cold rolled for 0.5mm-6.0mm, hot rolled for 6.0-50mm, and forged for 50mm and above. Known as the 'workhorse' of titanium alloys, Grade 5 titanium plate (Ti-6Al-4V) boasts superior strength, ductility, corrosion resistance, and high-temperature resilience, making it a preferred choice across both general and military industries. Complies with standards: ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V grade 5 titanium plate is predominantly utilized in the aerospace sector, military industries, power generation, vehicle armor, precise rocket guidance components, and the marine industry.
Grade 1
Today, DAXUN Alloys stands at the forefront as a leading global producer and supplier of premium Grade 1 titanium plates.
Our Pure Grade 1 titanium plates exhibit outstanding ductility and cold formability, making them perfect for deep drawing applications. Renowned for their superior resistance to general and seawater corrosion and resilience in oxidizing, neutral, and mildly reducing environments (including chloride solutions), Grade 1 titanium is an excellent choice for harsh chemical conditions. Its low density (about half that of nickel-based alloys), high strength-to-weight ratio, and exceptional corrosion resistance make it highly versatile. Commercially pure Grade 1 titanium is the softest and most ductile grade, featuring excellent cold formability, superb corrosion resistance, exceptional weldability, and notable impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plate, suppliers of Titanium Gr 1 Sheets, and manufacturers of Titanium Gr 1 Finished Plates. We provide ASTM B265 Titanium Grade 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, and Titanium ASTM B265 Gr 1 Sheets. Our offerings also include Gr 1 Titanium Patterned Plates Dealers, Titanium Gr 1 Perforated Plates, and Titanium Grade 1 Sheets and Plates, all expertly crafted in China.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is known as the 'workhorse' of commercially pure titanium. It delivers the perfect combination of strength, ductility, and excellent corrosion resistance for various industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium solution that offers an excellent balance between strength and ductility. It exhibits good impact strength, is easily weldable, and provides superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its excellent resistance to seawater and salt solutions further enhances its appeal.
With titanium's low density, high strength-to-weight ratio, and robust corrosion resistance, it is an ideal choice for numerous applications. It significantly resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications requiring exceptional ductility and corrosion resistance.
As a metal expert, DAXUN is dedicated to both small and large titanium plate projects. We are your trusted partner, ready to provide titanium plates and any technical support you need. Think of DAXUN not merely as a supplier of industrial pure titanium plates and titanium alloy plates but as your strategic partner, equipped to help you overcome any challenges and meet your project goals with precision and efficiency.
At Jiangsu Daxun Alloy Co., Ltd., our premier service center in China boasts an extensive inventory of Grade 2 Titanium Sheet ASTM B265 in various sizes including 1000mm, 1200mm, 1500mm, and 2000mm. We excel in fast order processing and offer comprehensive services, such as basic processing, precise water jet cutting, and efficient plate nesting. These value-added services are designed to streamline your operations, significantly reducing both time and costs.
Jiangsu Daxun Alloy Co., Ltd. remains a leader in the titanium plate industry through relentless investment in our state-of-the-art production facilities. Our strategic capacity agreements with trusted partners ensure that we deliver unparalleled titanium plate quality both now and into the future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today for the most competitive prices and comprehensive technical information on our top-tier titanium plates.
Q1: What products can you offer?
A: We offer a diverse range of general steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we provide 316L 300 series, 400 series, and duplex stainless steels like 2205, 2304, 2101, and 2507. We also specialize in high-nickel alloys like 800H and 600H.
Q2: Can you produce the products according to my own drawings?
A: Absolutely, we can produce products tailored to your drawings, ensuring your utmost satisfaction.
Q3: How does your factory handle quality control?
A: Quality is our top priority. We emphasize rigorous quality control measures from start to finish in our production process.
Q4: Can I request changes to the packaging and transportation?
A: Yes, we can customize the packaging and transportation based on your request.
Please note that additional costs and any price differences during this period will be your responsibility.
Q5: How does your factory handle quality control?
A: Quality is our top priority. We emphasize rigorous quality control measures from start to finish in our production process.
Q6: What is the delivery time?
A: Delivery time is typically 7 to 20 working days after payment confirmation.
For urgent orders, we prioritize and expedite the production process.
Q7: What are your payment terms?
A: We accept 100% T/T in advance, and Western Union for small orders.
B: Alternatively, 30% T/T with the balance 70% before shipment.
C: For large orders, a 100% Irrevocable LC at sight is accepted.
Q8: Can you produce Deep Drawing Quality (DDQ)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, and more. Inform us of your specific usage, and we will adjust the mechanical properties accordingly to meet your requirements.
Q9: How can I obtain a sample?
A: FREE samples are available for inspection and testing. If you need a small piece, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}