| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
At DAXUN, we pride ourselves on producing and stocking Grade 2 Titanium Plates (UNS R50400) in a versatile range of thicknesses from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate boasts a remarkable combination of high strength, ductility, and superior corrosion resistance, making it indispensable for diverse industrial applications.
Grade 2 Titanium Plate stands as a paragon of commercially pure titanium, offering an impeccable balance of strength and ductility. Featuring excellent impact strength and weldability, it also demonstrates outstanding resistance to corrosion in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. Its exceptional endurance extends to seawater and salt solutions, ensuring high performance in demanding conditions.
With its low density, impressive strength-to-weight ratio, and formidable corrosion resistance, titanium is the material of choice across a myriad of applications. Grade 2 Titanium Plate effectively withstands stress corrosion cracking, pitting, and crevice corrosion in chloride solutions up to 70°C. Boasting a melting point of 1660°C, this alloy is ideal for industrial applications where superior ductility and corrosion resistance are essential.
The lightweight nature of Grade 2 titanium plate makes it perfect for applications where weight is critical. Its strength and corrosion resistance have cemented its place in industries such as medical, chemical equipment, aerospace, marine, chemical processing, and desalination. Its versatility extends to oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, flue gas desulfurization systems, and more. Common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
At Daxun, we integrate multiple quality assurance tests including flattening, pitting resistance, mechanical, hardness, material positive identification, and expansion tests to ensure our materials meet the highest standards. Throughout production, we meticulously measure the product's diameter, thickness, and surface. Our standard delivery time ranges from 5-7 days, with special size products delivered within 15-20 days.
Titanium Grade 2 Plates are meticulously crafted in cold-rolled thicknesses from 0.3 mm to 6.0 mm and are available in hot rolled or heat-treated conditions. Hot rolled thicknesses span from 4.76 mm to 155 mm. Our plates undergo longitudinal and transverse rolling, with optional creep flattening heat treatment for internal stress relief and special flatness requirements. We offer plates in cut blank form for complex shapes, with further mechanical or chemical processing tailored to customer specifications.
Chemical Composition Insights for (Ti 6Al-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition Details for Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a leading expert in the metal industry, specializing in both small and large-scale titanium plate projects. As your reliable reference point and enduring partner, DAXUN stands ready to offer top-notch titanium plates along with comprehensive technical assistance to support your business. Trust DAXUN not just as a supplier of premium industrial pure titanium and titanium alloy plates, but as a strategic ally dedicated to overcoming your challenges and fulfilling your unique project needs, ensuring the achievement of your goals.
DAXUN's state-of-the-art service center in China boasts an extensive inventory of titanium plate products, enabling swift order processing. Through value-added services such as basic processing, precision water jet cutting, and efficient plate nesting, we deliver solutions that save our customers both time and costs.
With ongoing investments in our production facilities and strategic capacity agreements with our partners, DAXUN remains at the cutting edge of titanium plate quality, both now and into the future.
Contact DAXUN today to access the latest pricing and technical information on our titanium plates.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN: Premier Manufacturer & Supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to pioneer the development of high-performance titanium alloy plates worldwide. We ensure swift global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we produce and stock Grade 5 (UNS R56400) alloy titanium plates with thicknesses from 0.5mm to 300mm. Thicknesses of 0.5mm-6.0mm are cold-rolled, 6.0-50mm are hot-rolled, and 50mm and above are forged. Known as the 'workhorse' of titanium alloys, Grade 5 (Ti-6Al-4V) offers exceptional strength, ductility, corrosion resistance, and high-temperature tolerance. It is highly valued in various general and military sectors. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 Titanium Plate: Engineered for Excellence in Aerospace, Military, Power Industry, Vehicle Armor, Precision Rocket Guidance Parts, and Marine Applications.
Grade 1
DAXUN Alloys: A Globally Renowned Producer and Supplier of Premium Grade 1 Titanium Plates
Pure Grade 1 Titanium Plate: Exceptional Ductility and Cold Formability - Perfect for Deep Drawing. Grade 1 Titanium stands out for its superior general and seawater corrosion resistance, resilience to oxidizing, neutral, and mildly reducing media, including chlorides. With half the density of nickel-based alloys, an impressive strength-to-weight ratio, and remarkable corrosion resistance, it is ideal for challenging chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, offering excellent cold formability, superior corrosion resistance, weldability, and impact hardness.
Leading ASTM B265 Titanium Gr 1 Plate Producers: Premium Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates Manufacturers in China.
Grade 2
DAXUN: Your Source for High-Purity Grade 2 Titanium Plates (UNS R50400) in Thicknesses from 0.5mm to 120mm. Grade 2 Titanium, the 'workhorse' of commercially pure titanium, delivers a robust combination of strength, ductility, and corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate: Commercially Pure Titanium Offering a Superior Balance of Strength and Ductility. It provides excellent impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also excels in seawater and salt solutions.
Titanium's Remarkable Low Density, High Strength-to-Weight Ratio, and Corrosion Resistance Make It Ideal for a Broad Spectrum of Applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it's the alloy of choice for industrial applications demanding superior ductility and corrosion resistance.
DAXUN: Your Trusted Titanium Expert for Both Small and Large Projects. We are your go-to partner for titanium plates and technical support. Consider DAXUN your strategic ally, providing industrial pure titanium plates, titanium alloy plates, and the expertise to help you overcome challenges and achieve your project goals.
At Jiangsu Daxun Alloy Co., Ltd., our state-of-the-art service center in China boasts an extensive inventory of titanium plate products, ensuring rapid order processing to meet your urgent needs. With our comprehensive range of services, including basic processing, precision water jet cutting, and efficient plate nesting, we deliver unparalleled value to our clients. This not only saves you precious time but also significantly reduces costs, making DAXUN your ultimate partner for titanium solutions.
Our unwavering commitment to excellence is reflected in continuous investments in DAXUN's advanced production facilities. Strategic capacity agreements with our esteemed partners further solidify our position as leaders in titanium plate quality. Rest assured, DAXUN is dedicated to maintaining this supremacy both today and for years to come, ensuring you receive nothing but the finest titanium products.
Don't delay-reach out to Jiangsu Daxun Alloy Co., Ltd. today to secure the most competitive prices on titanium plates. Our team is eager to provide you with the latest technical information and support, ensuring you have everything you need to make informed decisions and achieve success with our premium titanium solutions.
Q1: What products can you offer?
A: We provide an extensive range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we offer 300 and 400 series, along with duplex stainless steel such as 2205, 2304, 2101, and 2507.
Furthermore, our high-nickel alloy offerings include 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely! We can manufacture products tailored to your drawings to ensure utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain rigorous quality control throughout every stage of the production process.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can adapt the packaging and transportation methods to suit your preferences.
However, please note that any additional costs incurred during this period will be your responsibility.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We maintain rigorous quality control throughout every stage of the production process.
Q6. How long is the delivery time?
A: Typically, the delivery time ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we expedite the process to meet your deadlines.
Q7. What is your Payment?
A: We offer several payment options: 100% T/T in advance, Western Union for small orders,
30% T/T with the balance of 70% before shipment,
and 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we specialize in DDQ materials suitable for stainless steel pots, sinks, bowls, etc. Inform us of your specific needs, and we will fine-tune the mechanical properties to meet your requirements.
Q9: How to get a sample?
A: We provide FREE samples for your evaluation. For small pieces, we may cover the courier cost depending on the request.
Q10: Which country have you exported to?
A: To date, we have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and others.
Q11: How to visit your company?
A: You can reach us by flight to Guangzhou Baiyun International Airport, from where we will arrange your pickup.
){kind=link}